Ford F-150 (2004-2008) :: 2006 - 4x4 Quit Working / Won't Engage
Jul 5, 2011
I have a 2006 F-150 4x4 and the 4x4 quit working, it gives me a P1867 & P1891 code but my scanner don't tell me possible causes. Where to start looking?
View 3 Replies
Jul 5, 2011
Advertisement
Ford F-150 (2004-2008) :: 2006 - Cruise Control Just Quit Working
The cruise on my 06 F-150 just quit working. No light and can't set it .
View 1 RepliesFord F-150 (2004-2008) :: 2006 - Radio Quit Working Then Lights And Truck - Alternator?
Driving home my radio quit working. I looked at the gauges and they all dropped to the left. The it looked like my lights quit working and then the truck just quit. All of this happened within 5 miles and 10 minutes. I jumped it and quit before I could even get going, it did start momentarily. Could not even get the gear shift into neutral; had to jump it to get that to happen.
It is 2006 F150 4x4, 5.4L engine and about 95,000 miles.
Ford F-150 (2004-2008) :: All Of Windows Quit Working
Simultaneously all of my windows stopped working checked all the fuses relays motors switches regulator u name it. I was told there is a module that controls this but it's in the middle of the dash.
View 1 RepliesFord F-150 (2004-2008) :: Backup Camera Quit Working
How to fix a backup camera that quit working this morning. Never had a problem till backing into a parking spot at work this morning.
View 1 RepliesFord F-150 (2004-2008) :: 4WD Not Working - Front Wheels Don't Engage
I have a 2006 XLT w/ the 5.4L engine. Manual transfer case, I'm wondering where to start looking for problems w/ the 4x4...the front wheels don't engage.
View 3 RepliesFord F-150 (2004-2008) :: Cigarette Lighter And Phone Charger Quit Working?
Why my cig lighter and cell phone charger stopped working. I changed the fuse but it did not solve the problem. I don't smoke but I love to charge my cell phone when I go hunting overnight.
View 11 RepliesFord F-150 (2004-2008) :: FWD Not Working - Actuator Is Not Allowed To Engage By Vacuum Pressure
I have a 2004 FX4 4x4 ... Four wheel drive is not working!!!!! Turn the dash switch to 4High or 4Low and the lights come on in my dash gauge cluster. So my 4x4 lights come on as if the 4x4 is working but my front wheels do not turn. What I have done:
Drove the truck forward while I watched the front drive shaft going from the transfer case to the front differential. Did this in 2WD and then in 4WD high. While driving forward in 2WD the front drive shaft did not move. Once put into 4WD high and driven forward the front drive shaft was turning. I guess this tells me that my transfer case and shift motor are working?
I jacked up my driver side front wheel and turned the tire by hand while the truck was running in 2WD. The tire spun freely and the CV axle (half shaft) did not turn. Then turned 4x4 dash switch to 4WD high and turned the tire again by hand and the CV axle turned while turning the tire. I guess this indicates that the IWE actuator was working....I guess???
Repeated the process above for the front passenger side of the truck and the tire would always spin freely regardless if in 2WD or 4WD. I could not get the CV axle to turn while spinning the tire on the passenger side when the truck was running and switched to 4WD
I checked the vacuum solenoid near the battery mounted on the firewall. The vacuum line supplying vacuum to solenoid was working and pulling vacuum. I did a series of test in conjunction with the dashboard 4x4 selector and the Vacuum Solenoid seemed to be working properly.
Crawled under the truck while the engine was running and pulled the vacuum line off the nipples of each IWE Actuators (drive and passenger side) put my finger over the lines and felt decent vacuum at each end of each vacuum line.
So dash switch and 4x4 light works stays on solid and bright does not flicker
Vacuum solenoid and vacuum lines seem to be working
Transfer case and shift motor seem to be working
Driver side IWE actuator seems to work
Front passenger side Actuator does not seem to be working??? Why I am so confused about this is because in HOURS of Internet research it seems that this Actuator is not allowed to engage by vacuum pressure. When I disconnect the vacuum line to the passenger side actuator I expected to hub to lock, but it did not, the tire would turn but the CV axle wouldn't? If I replace the passenger side IWE actuator will this fix my four wheel drive? Or is there something else I am missing??
Ford F-150 (2004-2008) :: Left Rear Turn Signal And Brake Light Quit Working
I have a 2006 F150 and the left rear turn signal and brake light has quit working. Also the license plate lights do not work. The cruise will disconnect when signalling a left turn. I have checked fuses and bulbs and the wiring/connector at the multifunction switch with no luck.
View 2 RepliesFord F-150 (2004-2008) :: 2006 - Front Wheels Won't Engage When Select 4H Or 4L
2006 Lariat 4x4 Troubleshooting. My front wheels wont engage when I select 4H or 4L. No dash lights are ever lit.
I read up and understand how the system works and plan to replace the solenoid, transfer case motor and both hub actuators. I swapped out the solenoid and wanted to test that it was functioning properly so I followed the video below:
YouTube........
With the engine running and selector switch at 2WD, I pull the vacuum lines off and can feel vacuum at the supply. I then hook up just the supply line up (to the bottom port) and expect to feel vacuum at the other solenoid port (top port - what I would call the outlet) and cannot feel any vacuum.
This has halted my repair attempts as I am not convinced this is functioning and would pull in the actuators if they were functional. I know it's a small vacuum from a small orifice but I would think I should feel it by hand, no?
The solenoid's electrical connector is plugged in during this as well. I get the same performance with the old solenoid and the new. If I bypass the solenoid I can feel vacuum at the front wheel hubs.
Should I try a third solenoid? Seems unlikely I would have 2 bad ones...No OBDII codes at all. What to try next?
Ford F-150 (2004-2008) :: Turn Signals And Hazard Lights Quit Working / Blown Fuse Now Truck Won't Start
My 2007 F150's turn signals and hazard lights quit working. I checked the fuse and it was blown. Once I pulled the old fuse out the truck wouldn't start at all. What happened?
View 3 RepliesPrius (2004-09) :: 2006 A/C Quit Working - Hot Air Coming Out
OK so about a week ago the A/C quit working in my 2006 Prius. The center display still works, A/C light comes on, blower works, hot air comes out. I had the system checked (I have access to a shop) and the system is still showing charged, so no leaks.
View 5 RepliesFord Wiring/Electrical :: 2006 E150 - Turn Signal Quit Working / Brake Lights Not Working
Turn signals quit working on my 2006 E-150. Swapped out the relay under the dash and it did nothing. Also noticed the brake lights aren't working. The headlights and taillight a are working. I pulled the fuses under dash for the lights and they tested ok. I did notice the flasher relay was making clicking sounds intermittently even when not touching anything.
View 3 RepliesFord F-150 (2004-2008) :: 2006 - 4wd Module Not Working
I have a 2006 F-150 Supercab King Ranch 4wd. The 4wd is not working. Took it to the dealer and they tell me the 4wd module is not communicating with the PCM. It is my understanding that this problem is rare...like 1 in a million. Ford wants to replace the entire PCM. In the past, I have had electrical problems with this vehicle due to corroded wires.
View 9 RepliesFord 6.0L Power Stroke Diesel :: 2006 - 4WD Quit Working
My truck does mostly pavement duty so no telling how long ago 4WD quit working but I needed it the other day and it's now a no-go. It's the '06 truck in my sig and it has ESOF.
When I flip the switch (4hi or 4low acts the same) my A/C continues to come out of the dash vents, it doesn't change. With KOEO I can hear a whirr-click from under the truck when switching 4wd on and off, I get noise both ways. 4x4 light on the dash seem to work correctly.
Broke out FORScan and got the following info:
===GEM DTC P1832===
Code: P1832 - Transmission Transfer Case 4WD Solenoid circuit failure
Module: Generic Electronic Module
Diagnostic Trouble Code details
Transmission Transfer Case 4WD Solenoid circuit failure
===END GEM DTC P1832===
[Code] ....
Any tips to quickly nail it down between the switch, GEM, wiring or solenoid? Looks like the whole thing is failing. I've climbed under the truck and all the wiring appears undisturbed. No recent work under there. In FORScan, these DTC's were generated in a user initiated test and I didn't pick up the instruction to re-run the test in 4x2 mode until I posted just now.
Under the hood everything seems to be routed correctly and connected. Vacuum pump runs a short while on start up like always has. I can lock hubs manually and they don't seem to be binding hard but they are a little stiff, haven't done that before so I don't know how hard it should be to turn them. I have a MiteVac but haven't tried using it to try and lock the hubs. Not sure any of that matters (yet) with the DTC's listed above.
Ford F-150 (2004-2008) :: 2006 - Four Wheel Drive Is Not Working
I have a 2006 F150 4x4 5.4L 43000mi. My four wheel drive is not working. I have the dash mounted switch to switch it into 4x4 Hi 4x4 Low. When I put the switch into 4x4 Hi nothing happens. 4x4 does not engage, and the 4x4 Hi light on the dash does not illuminate. I get the same symptom when the switch is placed into 4x4 Low. I have checked all of the 4x4 fuses and they are ok. I checked all of the vacuum lines to the hubs and they appear to be intact. What I should check next? What would cause this?
View 14 RepliesFord F-150 (2004-2008) :: 2006 - AC Randomly Stops Working
About a month ago, I was driving 50 mph in my 06 screw on a dirt road. There was an old wood bridge that was not as flush as I was expecting. Jolted the truck pretty good but it kept on trucking. However, a few seconds after the jolt, the power to the AC cut out. All I had to do was turn the AC to "off" then back on and it'd start working fine. Over the last month, the power randomly cuts out, but will go back on after I switch to "off" then back on. It's happened maybe 3 or 4 times since The Big Jolt.
View 6 RepliesFord F-150 (2004-2008) :: 2006 XLT - All 4 Power Windows Stopped Working
2006 XLT F150 Triton 4x4 crew cab. My widows all 4 stopped working I have replace the 30amp breaker in pos#401 and I have replaced. The switch in the drivers door but still nothing.
View 2 RepliesFord F-150 (2004-2008) :: 2006 - Driver Side Window Stopped Working
I have a 2006 Ford F-150 with about 43,000 miles .. love it. However, my driver side window stopped working today. For about the past month when you would power up, it would delay and then go up. This happened every so often. Going down was never a problem. Some times window would go up, then drop down an inch or so. Now this morning I went to the store and the window won't go up and it is down all the way. I do not hear grinding, only clicking. All other windows work fine.
View 5 RepliesPhaeton :: 2008 - AC Suddenly Quit Working
My Wife has informed me that her AC has suddenly quit working. There are no dash lights illuminated about this. I've been running 12 hour shifts this week but hope to check it out this weekend.
Are there any specific areas that I should look? And are there any AC problems that are common on a V8 Phaeton?
Ford F-150 (2004-2008) :: 2006 - Power Windows And Door Locks Stopped Working?
2006 F150 5.4 2WD extended cab tow package 24k miles
My power windows have stopped working from all locations. I checked and the fuses are good. I can no longer use the exterior keypad to unlock the truck, yet my remote keyring switch will electronically open both driver and passenger doors. Neither driver's nor passenger's interior door switches work.