Ford F-150 (2004-2008) :: Humming / Rubbing Noise Under The Hood When Come Across 1000 RPMs
Sep 29, 2016
I put a link below on the video that I made. But when I come across 1,000 RPMs weather I turn, go straight, left or right it makes this noise like a humming or rubbing noise. I took it to the dealership and they fed me crap saying when it gets worse or when it happens every time brig it back.
[URL] ....
I don't think this link is working I'm trying to figure out this iPhone. Search my YouTube channel Kill3rcr3w that's the channel I just uploaded it
View 2 Replies
Advertisement
I have a 2004 F-150 STX 2WD with a 2.5" leveling kit on it. I recently have noticed a rubbing sound that can be felt in the steering wheel and gas pedal the instant you turn right. I just replaced both hub assemblies and I just really don't know what it could be. It doesn't happen when you turn left or go straight and there should be no reason as to why my tires rub, because they haven't before. I got my truck aligned and they checked my joints and everything and said that it was fine....
View 13 Replies
I loved my 2009 Prius until this weekend. I just turned over 31,000 miles and now a loud humming noise has developed under the hood while driving. It has not been cold here and this doesn't start until I reach around 24 mph. It remains while the gas engine is running or I'm coasting with the engine off. The humming is there in D or in N and there no sound while turning. When I am under 24 mph the noise is gone. I have set up an appointment with my Toyota dealer for this week, but wanted to know ahead of time if any other Prius owners have had this issue.
View 5 Replies
Knock or tick at 1000 rpm. Truck has 20000 miles on it. Dealer replaced cam phasers. What next?
View 1 Replies
2015 IS350 AWD ... Lately I have noticed on a cold start that when my idle is between 1000-1500 rpms, there is a slight buzzing/humming noise. It goes away if I rev the rpms past 2000 rpms and also when it drops under 1000 rpms. It's almost like a droning noise. I can hear it inside and outside the vehicle when the rpms are in that range. I feel like the noise is made at a certain frequency and it causes a vibration to occur.
View 3 Replies
I went to throw my truck in 4wd the other day and now I'm experiencing a humming noise, but only when in 4 wheel. It's only noticeable when I'm in 4 wheel and I'm off the accelerator or coming to a stop, soon as I accelerate, come to a stop, or take it out of 4wd the noise disappears.
Only other symptom was I tried putting it in 4-low the other day and all it did for a good minute was rev up a bunch, but I switched it back to 2wd and 4-hi and low worked after that. 4wd does still work just fine, it's just buzzing and it's annoying the heck out of me
I did a search, not just on this forum either, all I keep getting is the old "buzzing 'til I put it in 4wd" topic. Hoping to get an answer before I start dropping money trying to find it on my own. I'm not used to these new-style 4wd systems so I'm lost for knowledge here.
View 4 Replies
Ok, been trying to track down an odd humming noise on my 08 f150 CC 4x4, 4.6l. kind of sounds like a hub bearing going. starts around 25-30mph and never quites down.
Turning left or right to load each side of the suspension doesn't change tone or intensity of the noise, different pavements doesn't change Tone or intensity. Hubs are tight, CVs are tight, 4x4 works as it should. Cant figure this sound out and it's quite loud.
View 2 Replies
I've looked at several threads but no one describes my exact problem. The issue started suddenly. When I am in 4WD and turn (does not have to be sharp) there is a dragging and rubbing noise. It drags hard enough that it will stop the truck.
Sounds like the brakes engaging and rubbing. I can not see any foreign material wrapped up anywhere. The 4WD appears to be engaging properly and the IWE appear to be working. I can "stomp on it" in a straight line and throw mud with no crazy noises and get a rooster tail from the front end.
I've got about 15000 on new brakes and rotors. Ceramic pads and lifetime rotors all the way around.
View 8 Replies
My girlfriend has a 2008 with around 120k miles on it. It's been pretty flawless but yesterday the RPMs started surging while idle and made kind of a high pitch humming noise when accelerating.
Today on her way to work she said the radio was going in and out, the battery light lit up and then the rest of the dash lights came on, and the speedometer stopped working.
What could be the problem? Could it just be the battery?
View 12 Replies
I've got a new issue that is happening on the front end of my truck. Whenever I try turning my wheel while driving, I get this rubbing/grinding noise coming from the front of my truck. It only happens when the wheels are in motion. It seems to happen less when I'm driving at higher speeds, but I can notice it make the sound at any speed. I tried driving it slowly in an empty parking lot while turning and it's definitely making the sound every time the tires rotate.
I took it in for an alignment because this was happening every time I drove, whether it be driving straight or making a turn. Now that my alignment has been fixed, it no longer make this noise if I am driving in a straight line, so it only seems to happen when I'm turning. I had the mechanic check to see if they could reproduce the issue. The mechanic was able to hear what I hear, but when he put it on the lift at the shop, he was not able to reproduce the sound.
View 6 Replies
I drive a 2008 Elantra automatic,and have a constant engine shudder/vibration whenever the rpms are between 1000 and1500. The engine shudder stops as soon as I accelerate above 1500 rpms,or take my foot off the gas completely.
The dealer recommended cleaning of the fuel injector system,not sure if thats the course to take.I do know my model has had fuel pump issues,but the dealer has told me all recalls on the car have been processed.
View 3 Replies
First off I have a 1997 F-150 4.6 with 205,000 miles on it.. stock engine and tranny. It's been a great truck and never given me any major problems. But recently something under the hood (wish i could be more specific) makes a really loud HUMMING noise (almost sound like a trumpet). For example- say im driving on the highway and i let off the gas, this humming noise will appear and it is very loud, but right when i give the engine some gas the humming goes away.
Or also when I am driving through town, when i come to a stop light, let off the gas to apply the breaks, this humming noise will come about. what i have to do is stick the truck in neutral and give it a big rev (which i do like hearing my exhaust so it isn't always annoying) and then it stops. note though, it doesnt happen every single time i let off the gas, however it is pretty frequent.
do yall think this is in the air intake system? thatd be my only guess because when i rev the engine it quits, but one thing is it sounds like it comes more from the passenger side of the truck, and it seems to occur more often when the temperature outside is cold. im completely stumped by this one, ive never heard anything like it.
View 14 Replies
I just bought a truck, it has a whining noise while accelerating, stops while letting on the gas, does not do it in neutral even if i rev up the engine. Only whines while there is some force on it, ie.. accelerating, or going up a hill at any angle, and does it from about 10-15mph- atleast 60mph.
View 2 Replies
2010 F150 ... So I have the tick noise at rpm's 800-1000 at drive through, stops, etc. So I did research on it a few months ago and saw that it might be VCT's but should be able to drive. so I drove it waiting to save money and have it go to a shop. well this past weekend while coming home from work my oil light came on the pressure dropped to zero, I was on the highway so I drove about another mile to get off highway and once I got off my truck died. I had it towed to my house and I thought I blew my motor. So I started doing research here and found that the VCT's AND cam Phaser could be bad. so I replaced my VCT on driver side put it all back together it started and loud knock was gone. then after 5 mins it was back very loud knock!
So I shut it down and took apart the passenger side once I got the valve cover off I found the problem.... The bolt that holds the cam phaser in place snapped off and was riding along the camshaft. So I took that out and extracted remaining part of bolt. inspected my camshaft and it was really messed up. so I bought new Phaser and Camshaft. the camshaft just came in today and I am trying to put it back in. but the hole for the pin in the phaser doesn't line up and I cant spin the shaft to make it line up. should I spin the cam phaser? I marked the chain and the phaser is where it should be on chain, but with that bolt snapping off could that have thrown the timing off so my mark is no good? when I lay the camshaft in place it sits perfect and if I just move the phase over 2-3 links it will all fit together. Should I do that?
View 5 Replies
A very odd hum from the rear (2005 f150 4.2) that occurs at all speeds. Low speed it occurs regardless of load on the drive line. At higher speeds it only happens when i have considerable load on the drive line. All bearings in the diff were replaced less than a year ago when the main pinion bearing went and the diff gears were in pretty dam good condition. Wheel bearings are not getting warm to indicate a wheel bearing. And when i let off the throttle it hums for a few seconds and dissipates as the tension on the drive line goes away. I even looked at the carrier bearing assy and it seems to be in good working order. I live pretty dam far from any type of service so i was just curious before i start trying to trouble shoot this any further.
View 1 Replies
My 05 F150 with 107k miles becomes increasingly noisy.... From speeds about 15mph up to 50mph there is a humming noise from the front wheels, clearly audible during coast. It sounds almost like tire noise, low frequency with a clear tone (not rumble) and gets worse in LH turns / better in RH turns. The frequency follows the speed.
I also can feel vibrations in the steering wheel. It's not the tires, I changed them without any impact. Checked wheel bearing play - seems OK. The locking hubs are stuck in locked position, with quite some play between the hub and the driveshaft at the RH front wheel (have not checked the LH front wheel yet), seems weird...
Where should I start to look, - wheel bearings or locking hubs? And more important, we plan a 1500 mls trip to Germany - do I dare to drive the truck? What is the worst thing that could happen if wheel bearing or locking hub?
View 1 Replies
Everything might be a slight exaggeration. But fuse 14 covers Backup lamp and day time running lights relay coil, A/C Pressure Switch, Redundant Speed Control, Heated PCV (5.4L), Trailer Tow back-up lamps, ABS, Reverse park aid, EC Mirror.
This is a 2006. 4.6L V8, SCREW. I don't have reverse park aid. When the fuse blows there is a loud screeching noise from under the hood. Can't identify it because the fuse wont go while I am sitting idling in the driveway. The parking break i9ndicator comes on, the ABS indicator comes on, Cruise control goes away and the A/C quits cooling but still blows. I assume EC Mirror means Electronic Compass Mirror. So I need to figure out where the short is.
View 10 Replies
I have a 2009 Corolla and anytime the car is idling and it drops below 1000 RPMS there is an extremely annoying ticking sound, it goes away when I put it in Neutral or the AC is on because it idles higher.
View 7 Replies
I have a 2002 Silverado 1500 Z-71. In 4 wheel drive, I can hear a humming/rubbing noise from the front end. Not real loud, but enough to get my attention. It happens at around 25 mph, and just as I'm coming to a stop. This is on the street.....going straight, not while turning. I only engage the 4 HI during street driving on a straight line drive just to "exercise" the gears and transfer case. I don't notice it on the dirt 'cause of trial noise levels. All fluid levels are normal in transfer case and axles. How much noise is normal during 4 wheel drive operations?
View 14 Replies
My mother has a '04 Santa Fe 3.5. Her automobile makes a rattling/grinding sound when around 1000rpms/idle. However, the sound disappears when accelerating and drives like a charm. The sound returns once again around 1000rmps at idle or stop. I have changed the oil pan, replaced oil and filter and even put in a new battery. I'm not an aficionado when it comes to Hyundais (Subaru driver here).Car also has 180k miles.
View 6 Replies
I have been experiencing a strange sort of loud induction/air turbulence/chirp noise right when I begin to apply the throttle at 750-1000 RPMs. It's the type of induction noise you would expect to hear from a car with an open filter intake if you shifted into 6th gear at very low speed(bogging, chirpy noise) Only been happening for a week.
I have an APR intake, and my initial thought was that maybe the tone of the intake had changed a little since it has gotten colder....but you actually cannot even hear the noise under the hood, let alone near the intake. It is only noticeable from inside the cabin. It happens regardless of clutch engagement and a/c. Car drives fine other than that.
It started happening with the soundaktor unplugged. I actually plugged it back in since then in hopes that it might mask the noise.
Video (GTI 6MT)
View 1 Replies
