Ford Super Duty (1999-2016) :: 2001 - Rear Drum Braking Noise?
Jul 17, 2013
I have an '01 F250/4X4--How can you tell if your rear drum brakes are bad? Do they make a noise?
View 8 Replies
Jul 17, 2013
Advertisement
Ford Super Duty (1999-2016) :: Rear End Shudders When Braking At Highway Speeds
I have an '04 EX with 6.0. When braking at highway speeds the rear end shudders until I get the truck slowed down some. Around town speeds of 45 or less the problem is almost non-existent. It almost seems to be hydraulic instead of pads/rotor issue. Wouldn't a warped rotor show up at slower speeds as well? I have some good mechanics around, but have never found a great brake shop that I can trust. Go in needing pads and they try and upsell saying this or that is going out.
View 9 RepliesFord Super Duty (1999-2016) :: 2003 F250 - Vibration At All Speeds And In Rear End When Braking
My 2003 Ford F250 V10 seems to have a vibration, sometimes at all speeds and sometimes at freeway speeds. I replaced front hub assemblies and ball joints and rear calipers last year. When braking i have a vibration in rear as well, which I think is from uneven rotor but can it be causing my vibration? Also sometimes I can smell hot brakes from the rear.
View 2 RepliesFord Super Duty (1999-2016) :: Grinding Noise While Braking From Engine Bay / Power Steering?
Truck seems to run ok, but when I push the brake pedal down a bit, a strange grinding/howling noise comes from the engine bay and same thing with the power steering. When I put the brake pedal down to the floor, it stops?
View 12 RepliesFord Super Duty (1999-2016) :: 2001 - Over Bumps Rear End Very Rough?
I've got a 2WD 2001 F-250 P/S Super Duty that is almost bone stock. The only suspension work done is the addition of air bags which are deflated. Whenever I hit ant bumps it feels like the rear axle is gonna come up through the bed of the truck. I've changed the shocks and there's no change.
Cars and other trucks seem to take the same bumps like a Cadillac.
will go towards saving my marriage since I'm building a house 1/4 mile from a R/R crossing.
Ford Super Duty (1999-2016) :: 2001 F250 - Easier Way To Fill Rear End?
Is there an easier way to fill the rear end on my '01 f250? I have a gadget with a valve on it with a length of tubing that you put on the bottle, but you still have to snake the bottle up through the chassis.
View 14 RepliesFord Super Duty (1999-2016) :: 2001 F250 - New Rear Bumper Conversion?
Ok I have a 2001 f250 SD with 7.3 and my rear bumper is dented and badly and warped. The steel frame mounting part of it is straight and fine. I found a "kit" on eBay that has just the end caps and plastic top cap for a 2008+ style trucks. Would those caps and plastic fit on my frame mounted section (what the actual name for the part that the chrome bumper actually screws into that mounts it to frame) ?
View 1 RepliesFord Super Duty (1999-2016) :: Driver Side Rear Brakes Making Popping Noise - Bad Rotors / Rear Wheel Bearings?
99 F-250 Ext cab 4x4 7.3 285,000 miles.
I got home today opened my door and got snaked in the face with the smell of brakes. I got out of the truck then I heard the drivers side rear brakes popping as they are cooling down. I reached down to touched the wheel and it's crazy hot. Opened the garage and went to retrieve the infared thermometer. The rotor/caliper was 350 degrees, hub was 150 degrees, axle tube was 90 degrees.
I took the wheel off and inspected stuff. The rotors do have some heat spots, the caliper visibly looks okay but not 100%. The pads look like even wear. I am guessing that the caliper either is hanging up or I have a wheel bearing going? The passenger side was like 80 degrees on everything. There is a slight shimmy while driving which to me feels to me like the beginning of warped rotors. I don't hear anything to me that screams wheel bearing noise wise.Brakes or bearings?
Ford Super Duty (1999-2016) :: 2001 F350 - Rear Axle Code Is Missing
I'm trying to find to rear axle ratio on my 2001 F-350 dually and the axle code seems to be missing.
View 12 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Rear End Differential Fluid Change
I have a quick question. I am gonna change the fluid in my 01 f250 rear end. it has 410 gears and a limited slip diff. if i use full synthetic gear oil do i have to add the limited slip additive or just the 75w-140 full synthetic gear oil.
View 14 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Rear Pinion Bearing Replacement
I am working on my Dads 01 super duty with a 5.4, automatic, and the pinion bearing has seized up due to a lack of fluid from a rusted out rear diff cover. The tag on the diff cover had a 10.5 stamped on it and has 12 bolts. Is this known as a ford 10.5"
I have changed gears and pinion bearings in a Dana 70 before is this the same process? What are part numbers for a new pinion bearing and seal? Gears are in fine shape.
Ford Super Duty (1999-2016) :: 2001 F350 - Extreme Uneven Wear On Rear Pads
Have a 2001 F350 7.3 4X4 with single wheels in rear. Started hearing brakes noise and decided to change both front and rear pads. Front had almost half the pads left. Rear on drivers side had about half the pads left. The passenger side metal to metal on the inboard pad and about half the pad on the outboard side. The slides on the caliper were a little sluggish but moved freely. Don't think there is enough to have them turned so will have to replace the rotors. Why this would happen. Could the caliper get stuck? It was easy enough to compress with a C clamp.
View 3 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Left Rear Caliper Starting To Hang Up Again?
I have for the 4th time in a little over a year developed another issue with a rear caliper hanging up last year i ended up replacing both rear calipers with reman. from NAPA. 3 months ago i had to replace the right rear again. Now currently i am having the left rear starting to hang up again. I've done a fluid flush and everything. I'm kind of at a loss. I don't normally have this much trouble with brakes. Some of the symptoms that go along with this are a spongy pedal and inconsistent brake feel just like when you have air in a line.
View 1 RepliesFord Super Duty (1999-2016) :: Rear Wheel Bearing Making Noise
Have a rear wheel bearing making some noise. A friend told me that it is always the outer bearing that goes first . Can you replace the bearing without replacing the race?
View 14 RepliesFord Super Duty (1999-2016) :: 2012 - Metallic Noise From Rear Bed Area
New 2012 SD - Is it normal? Going over road bumps, etc causes a metallic sound, kind of like you had some loose metal in the bed bounding around...except it does it when the bed is empty. At first, I thought spare tire...but it is tight. Springs making noise? My father's 2011 F-150 does not make any noise.
View 4 RepliesFord Super Duty (1999-2016) :: 2001 V10 - Knocking Noise And Oil Has Water In It
I have a 2001 6.8l v10 and have nothing but problems. now i got a knocking noise and the oil has water in it. i have no clue what is wrong and on start up it blows white smoke till its warm i have looked at the coolant lvls and they have not changed. the oil pressure is fine while driving but at idle and stop lights and stop signs it drops and the light comes on. i have not had a check engine light yet? what could be wrong? i have blown plugs 5 time 3 coils and 2 head replacements. I hope its just old oil or bad oil i have no clue it is due for an oil change but would just oil oil make all this happen. I also am seeing oil coming form the intake on the throttle body but the oil breathers are right there too.
View 14 RepliesFord Super Duty (1999-2016) :: Squealing Almost Chirping Noise Coming From The Rear Of Truck
So When driving around I'm hearing this squealing almost chirping noise and it sounds like its coming from the rear of the Truck. I greased the bushings and leafs but that didn't fix it, to me it sounds like a rotating noise. Don't think it's the brakes cause it makes the noise when driving not stop.
Also, a bad alternator would make noise while driving over 40+mph, like a loud whistle?
Drive a 2012 F250 6.2L 19k miles
Ford Super Duty (1999-2016) :: 2001 F250 - Rear End Slip / Bump When Initially Starting From A Dead Stop
I am experiencing what feels like a "bump in the rear" when initially starting from a dead stop. It feels like a car behind me tapped the bumper or that the truck "hunkers down" first, then moves. Tranny seems fine also. Once moving, there is no problem whatsoever. There atre no noises, leaks, or other symptoms. Also, when coming to a stop, it feels the same way just before the truck completely stops. If I drift forward a little, then apply the accelerator, it does not "slip" or hunker down.
Took it to the dealer and they claim that they can't find anything wrong and may just be the suspension releasing? The truck does this whether loaded or not?
2001 F250 CC Lariat SB 7.3
Ford Super Duty (1999-2016) :: 2001 F250 - Tracking Down Strange Noise?
My dad just bought a 2001 F-250 Crewcab 4x4 w/V-10. 72,000 miles. Anyways i noticed a small almost exhaust leaking sound on the test drive. I had the dealership put it up on the rack so I could see the underside. I noticed that it has the famous broken manifold bolt. So I kinda wrote it off on that we would have to get that fixed soon. Anyways the noise hasn't gotten worse just now noticing it that it has set times when it happens.
It happens around 25 mph then goes away then back at 45 mph, then goes away. I am having a hard time describing it. Almost like the exhaust is building up pressure then releasing it when it gets too high. But then I starting thinking transmission something since it kinda has a delayed shift when the noise happens.To clarify I am not saying it anything to do with the torque converter. I am just rolling to find out what is going on.
Ford Super Duty (1999-2016) :: Clunk While Accelerating And Braking
So my '99 F350 4x4 is making a clunking sound and there is a distinct jolt in the truck while this is occurring.
Symptoms: From a stop while accelerating, there is a distinct jolt and clunk. The best way I can describe the feeling is like something isn't tightened down all the way so there is a split second while inertia is generated and the "looseness" catches up to the acceleration.
When stopping, the clunk and jolt is generated when the truck comes to a complete stop. When the truck rebounds backwards a bit because of the suspension pulls it backwards after stopping, you will hear the clunk again.
I replaced the ball joints a week ago an a wheel hub bearing on the right side. I don't recall this before these repairs, but it may have been making this noise. I was more focused on the grinding from the wheel bearing so I may not have noticed the clunk and jolt then.
Where I should start looking for the problem?
Ford Super Duty (1999-2016) :: Rumble With Vibration While Braking
2004 6.0L Excursion Limited 4x4.
I recently developed a "rumble" with vibration while braking. I describe it as a rumble because I associate it to a similar sound, cadence, and feeling as if you were slowing down on the rumble strips you find on the side of the highway.
It is mostly only noticeable at lower speeds. I know the sound and feeling of warped rotors, but this seems different. If it makes any difference, one issue I've been dealing with is that the front transfer case does not release when 4x4 is off and hubs are in AUTO.