Ford Super Duty (1999-2016) :: 2015 Aux Reverse Light Wire
Apr 6, 2015
Looking for a diagram which wire to tap so I can trigger/run my aux back up light? I tried tapping the existing wire behind the tail light and it didn't work, made the truck do funny stuff like killing the ignition. I had read on here on white knights web site that on the newer trucks you cannot use the back up circuit from the seven pin so I didn't try that. I don't have up-fitters and really didn't want to run a wire to the front but will if that is the best solution.
View 8 Replies
Advertisement
I installed a reverse camera to my new Pioneer in-dash nav head unit this morning. I wired (at the rear of the truck) the power signal lead to the reverse wire at the trailer connector. I also need to wire a reverse signal input into the back of the head unit. I really do not want to run a power lead from the rear of the truck to the cab. Is there a wire under the dash I can tap into, or could I use the wire going to the backup alarm that’s somewhere under the dash (if I can find it). 2010 F350 deisel, crew cab, 4WD, long bed.
View 9 Replies
Installing a back up camera and need to locate reverse lights on driver's side at rear bumper. What color wire is for the reverse lights on a 2003 F-350 (truck in my sig)?
View 4 Replies
I love my new truck. '15 250 CC SB. It would be nice if when I am backing up not to have the dash lights in my eyes once I turn off the head/parking lights at night. I turn off the head lights so as to make everything darker. Much easier to see what is in my mirrors.
View 2 Replies
Had the DEF 500 mile warning come on last week. Second time for this. First time early on when it was new. Put a 2 1/2 gal. container of Blue DEF then and all was well. This time I did the same thing but keep getting the 500 mile warning afterwards. Cancelled the warning a couple of times , and now I am getting a warning that I have 378 miles left on the DEF fluid remaining. Its like the truck didn't recognize me adding the 2 1/2 gal. Also the check eng. light is on now. Thinking thats related. 7,000 mile on truck
View 3 Replies
Im an outside sales rep and I drove 85k miles last year in a F-150. The time came where I needed a new company truck and now I'm in a 2015 F-250 2wd 6.2l lariat. I love the truck but my back is killing me. I've only had it a little over 3 weeks but it has over 6k miles on it. The majority of the time my bed is unloaded but there has been a few times my 1/2 ton was overloaded so i stepped up to a 3/4 ton. Ive tried lowering my tire pressure but the TPMS light comes on. I also bought sand bags to leave in the back of my truck to add weight to it when not loaded. Im about to pull the trigger on bilstein 5100s but was wondering of there is anything else I could do make the truck ride a little smoother.
View 14 Replies
I got back to my new truck after doing a job and found the passenger side tail light smashed. No note or evidence of what happened.
Will a 2013 or 2014 taillight also match this truck?
Looking for a part number for this passenger rear taillight?
View 8 Replies
I just noticed a week ago that I don't have reverse lights. I check the fuses all good. I have checked the harness and there is continuity. So that tells me that the relays are good. I also read to check the neutral safety switch but where it is located. After trouble shooting last night I also noticed that I don't have my 3rd cab brake light either.
View 3 Replies
Bought a brand new F250 6.7 it has 7000 miles in it now and the check engine light comes on and the truck goes into limp mode. I have taken it in to the dealership twice they said there is no code they can find and they just reset the check engine light and it does ok for a bit then starts the cycle all over again. It also is only getting about 6.5 mpg....
View 6 Replies
where do the wires from the cabin aux switches end up? Are any pre wired to outside of the cab (past the firewall?).
i was wanting to install a better back up light on an aux switch but don't want to deal with running thru firewall, etc.
View 2 Replies
Where is the best/easiest location to run some wires from the cab to the engine compartment?
I need to run some wires for a remote start with alarm and a backup camera.
View 13 Replies
I have a 2006 6.0. It's hard to put into to drive and for you to get it moving you have to just about floor it. The tow haul light is flashing but my bullydog won't pull the codes. It stops moving after like 30 to 40 ft after you got it moving and acts like it's in natural. If you turn it off and back on it sometimes will move another 30 to 40 ft sometimes. It also sometimes if you put it in reverse won't let you give it gas. Like you can push the pedal but the rpms won't climb for this reason I'm thinking something to with a solenoid or fuse or something along those lines and also because if you restart it will move again. I don't know much about transmission. I'm taking it to a shop tomorrow for them to try and read the codes. If they say the transmission is toast i already located another one 2 hours away to swap in which I'll do myself to avoid the high cost of the shop which also I'll look to yall for guidance. I drained some of the transmission fluid and didn't see any metal flakes. Should I pull the pan as well and look if nothing is coming out in the trans fluid ?
View 4 Replies
I figured out how to go from the passenger door to in the cab, but how do you do it on the driver's side? The area is pretty "busy" around the emergency brake area.
View 6 Replies
Trying to find ground wire location on my 99 f250 super duty with the 5.4 triton I didn't unbolt it myself. Going to be doing the big 3 upgrade soon and would like to use the factory ground spots.
View 13 Replies
I have a 1999 Ford F-250 superduty single cab. I am trying to put in rear speakers into the stock speaker housing but there are no wires run to the area. Where are the wires located in the dash to run the wire from?
View 2 Replies
I have an 01 f350, my reverse lights only work when I hold up my shifter, like its almost into park. I think my reverse light switch is bad, but I don't know where its located.
View 6 Replies
I just had a headache rack built for my truck. Looking to wire in 2 very bright reverse lights, 2 not so bright lights to deal with stuff in the bed of the truck at night, and also mounted a receiver hitch so I can hook a winch up back there when needed. looking for opinions on wiring for all of this. Never wired stuff like this so I'm shooting in the dark. My wiring skills are adequate but not great.
View 7 Replies
I have a 2007 F-350 SRW. I bought some mirrors of craigslist from two different sellers. They are from 2008 or later, they didn't know the exact year. I have looked in the tech folder and searched and searched. could not find wires that are the same color as mine. Yes, mirrors are OEM. I need to know what color goes to what color.
Do they match color to color? question mark represents color that doesn't line up
drivers side door colors=============== new drivers side mirror colors
green------------------------------------------------- green
black--------------------------------------------------black
green/white-------------------------------------------black/white?
blue----------------------------------------------------blue
yellow--------------------------------------------------yellow
red------------------------------------------------------red
brown---------------------------------------------------brown
passenger door colors=================new passenger mirror colors
green/purple------------------------------------------white?
black---------------------------------------------------black
white/blue---------------------------------------------black/white?
yellow--------------------------------------------------yellow
green---------------------------------------------------green
brown---------------------------------------------------brown
brown/purple-------------------------------------------purple?
Side note these are in no particular order as far as pin location.
View 5 Replies
I was getting ready to run a fused wire from the battery to the rear of the truck to power my bed lights. Then I read where some owners have jumped the trailer charge relay socket to provide constant 12v at the 7-pin trailer plug.
I never keep my trailer cord connected to the truck when camping so the chances of the trailer draining the battery are nil.I don't want powering the bed lights from other sources as I have decided I want 12v to bed light switch always available.
View 1 Replies
Any limited number of lights the factory trailer harness on the truck can tolerate? I'm looking to add some extra running lights on my trailer, also want to put a couple of lights on each running board on the truck, they will be tied in with the trailer harness since it is not monitored by the BCM. I did a search on this a few different ways and couldn't find anything.
View 8 Replies
What color wire controls the high beams?
View 1 Replies
