I am looking for a site that i can download a service manual with good wire diagrams. I want to install an alarm with remote start and need to know what wires go to what.
View 2 RepliesI am looking for a wiring diagram for that taillights for a 1999 f350 pickup. I am working on a friends truck that doesnt have any taillights and I would like to have a diagram in hand before I get started on it.
View 7 RepliesI'm currently trying to swap out the standard AM/FM/CD for a DVD receiver with backup camera, and need to find out the proper wiring colors and pin position. I'd rather not send it to a stereo shop, as I've seen a lot of hack work by so called "audio installation experts", and besides.. I have a shop and can do the work myself.
I tried looking through AllData, but since my truck is too new, Ford doesn't release a lot of technical info for us in the aftermarket. Looking for a link to a Ford diagram?
Looking for a wiring diagram for the coolant temp sensor? 1999 F250 SD V10....
View 4 RepliesWhat is the factory radio wiring colors or know where I can find a diagram?
View 14 RepliesMy four wheel isn't working. I have a 2002 f250. When I turn my esof switch the dash light doesn't come on and when I turn on the lights the switch doesn't even light up. I'm going to check for power at the switch but I was wondering to get a diagram for the 4x4 so I can see if there's anything else I can check or look at.
View 9 RepliesJust got an inexpensive LED Stop/Turn/Taillight Bar my problem is it has (3) wires Red, Black and White while the available connection from the old bar has only (2) wires Black and White with Red Dots.
The wiring instructions for the new LED bar says (1) Attach black wire to tail lamp circuit(+), (2) Attach the Red wire to the stop/turn circuit(+) and (3) Attach white wire to a good ground(-) location.
How I should hook this up? My thought is Black to Black , Red to White with Red Dots and White to Frame metal.
I just picked up my 2007 F350 as a replacement for my 2003 F350 (still have the 2003). I really like the uplifter switch option on the truck, I can normally figure things out but I am one of those people who is electrically challenged (home and auto)and also am one who does not wish to butcher the new ride (same for the home)to gain an education in the art of wiring. I would like to reinstall my headache rack lights on this truck as they are needed for winter work. I was in my truck manual and the info for wiring is weak and the website did not respond nor did my email to ford. I have found the wire harness but it is not tagged as a pair/color to switch. I have the lights already grounded to the rack, so I am thinking I just need the hot wire from the switch. Looking for the color code for positive and ground for the switches.
View 14 RepliesFirst, need a wiring diagram for the outputs on the back of the brake controller module? I want to check and see if there is a problem with the connection to the rheostat. I can activate the trailer brakes with the slider bar but not with the brakes.
Second, where I can get a new OEM controller that will replace my old one if I can't "Cypher it out"?
I just had a headache rack built for my truck. Looking to wire in 2 very bright reverse lights, 2 not so bright lights to deal with stuff in the bed of the truck at night, and also mounted a receiver hitch so I can hook a winch up back there when needed. looking for opinions on wiring for all of this. Never wired stuff like this so I'm shooting in the dark. My wiring skills are adequate but not great.
View 7 RepliesI just bought a 2008 F-450 Crew Cab 4x4 .
Whats the correct way to use the remote start?
The lights flash and that's about it.
Where and how can I get the code for the door pad?
I have a 2011 camry and was wondering if I need a bypass module to install an alarm and remote start. Its an Autopage C3 rs-1100...
View 5 RepliesI bought a 2016 F-250 Lariat, Crew Cab, Short Bed, 4X4, 6.2 a couple weeks ago. One thing I had to have was remote start. My truck was not manufactured with remote start so the dealer installed the Ford 1 way remote start system. The system works fine however the air conditioning fan runs on the lowest speed when remote starting until I put my key in the ignition at which time it reverts back to wherever it was set when I shut the truck down. The whole point of the remote start for me is to get a head start on the truck cooling off but with the fan on low when remote starting it defeats the purpose. How I can change the setting so that when I remote start the fan runs on high? Dealer is clueless and the settings in the truck only allow to turn the system on and off and run time duration.
View 7 RepliesI just bought me a 2006 Ford F350 Lariat. A sticker in front of the radiator says says that my truck is equipped with remote start. How would I go about using it? I only have one fob. If it is in fact something that I can utilize I have seen guys on youtube program their fob to do it by clicking three times.
View 2 RepliesHave an 08 F350 with V10 automatic. Keyless entry with factory alarm. I want remote start. What is the best route to go? Read somewhere on this forum that the truck has remote start and just needs to be enabled. Is this true? I have installed remote start a couple times on older vehicles and it was a major pain. I can't believe it is already on my truck, what do I need?
View 7 Repliesthe stealer says that since I already bought the truck that it would cost a lot for them to put one on for me. i figured it would be a cheap mod for a stealership to do on a new truck. i guess it shouldn't be too surprised. thoughts?
View 14 RepliesI've got a 2012 XLT that I would like to add remote start to because I'm tired of getting into a truck that feels like a freaking oven.
From what I see on Ford's site, looks like this should work:
[URL]
Are there any aftermarket systems I should be considering?
My remote start/entry on my 2013 F250 won't work outside of 25 or 30 ft from the vehicle. On my 2011 it would work close to 100 yds away. My dealer has no idea why. And yes, I changed the batteries
View 12 RepliesIt is starting to get cold where I live in Idaho, 22 this morning, and when I use the factory remote start on my 2011 the heater is not coming on as the owners manual says it should.
View 6 RepliesI can't seem to get my heated seats to come on when I use the remote start. Is this possible? I assume the supplemental heater comes on behind the scenes. Is there a temperature differential between the climate setting and the outside temperature? If so what is the delta? If it's 40 degrees outside and my climate is set at 60 degrees...will the supplemental heater come on? How about the rear window defroster and heated seats, can I make them come on when remote started? Same question for the seat cooling...in a few months.
My truck is a 2012 Ultimate Lariat 6.7L ......
I have a factory remote start. Not sure if I have an issue or not but at what point does the fan come on automatically to clear the windshield? It was -9C this morning and when I went out after about 5 minutes there really wasn't any air coming out of the vents.
Does the truck have to warm up to a certain temperature before it starts to blow air to clear the windshield? Doesn't tell me much in the manual.