Ford Super Duty (1999-2016) :: Broken Clutch Fork And Worn Input Shafts
Aug 27, 2016
I need to tear down a zf6 out of a 2000 powerstroke to replace a broken clutch fork and a a worn input shafts. What special tools do I need for this?
View 2 Replies
Aug 27, 2016
Advertisement
Ford Super Duty (1999-2016) :: Rears Tires Are Worn Down On The Inside
I have a 2013 F250 6.7 Crew Cab Single Wheel. Stock 20" Michelin tires and stock suspension. I have almost 20K miles on it. I just rotated the tires again and noticed that the rears are worn down on the inside. The fronts look perfect.
View 11 RepliesFord Super Duty (1999-2016) :: 2000 4X4 V10 - Hubs Are Worn / Locked While Turning
But on my 2000 SD V10 the hubs are worn I just cant find which way to turn them to auto ?
I'm getting popping and such so I think I'm locked while turning.
Also.... IS there a way to check the COPS with a multimeter? I think I got a bad one.
Ford Super Duty (1999-2016) :: 2005 F350 - AUX Audio Input
Is there an input for an iPod/xm radio on the back of the stereo? On the front there is an AUX button but idk where to plug in. If so how do you remove stock radio? 2005 king ranch 350 is the truck.
View 11 RepliesFord Super Duty (1999-2016) :: ABS On - Codes For Left Front Speed Sensor Input Circuit Malfunction
2001 F250. I have had issues on other trucks where you get a funny-acting speedometer with a code that comes up as VSS (sensor on top of the rear differential)....And it shifted exact same way.
My new truck speedometer is totally fine and the ABS is on with codes:
C1158 Left front speed sensor coherency malfunction
C1155 Left front speed sensor input circuit malfunction
Shifts about the same way on the trucks with bad VSS.
Question is will a bad front speed sensor affect the way the trans shifts? Doesn't happen all the time. If you go slow it shifts smooth. If you pull off fast a barely noticeable jerk from 1-2 and 2-3....
Ford Super Duty (1999-2016) :: OEM 7 Way Trailer Connector Broken Off?
Well, it seems the cover on my trailer connector got broken off. The cover locks the trailer plug into the truck side. The connector on the truck is/was supplied by Ford. Now the dealer say NLA, only 2005 and up. Truck is 99 F250 SD. Plug is 4/7 way. Where can I locate a direct plug-in replacement? I do not want to be cutting and splicing.
View 14 RepliesFord Super Duty (1999-2016) :: Trailer Plug Door Is Broken
The door on my trailer plug is broken. I can't seem to find just the door. Need to get one without having to buy the whole plug assembly?
View 6 RepliesFord Super Duty (1999-2016) :: Front Drive Shaft Broken?
Not sure what caused it to break but my front driveshaft split in half. I had it in 4wd and was doing a K turn to back in my driveway in a snow storm.
I got underneath in the snow (miserable) and wasn't able to come close to getting it off. The bolts holding the shaft onto the t-case will not budge and the tiny 5/16" bolts stripped all my small 1/4" sockets. I'm guessing I need a 3/8" drive 5/16" for front and the rear just spins. Any tricks to getting this off the truck.
Ford Super Duty (1999-2016) :: Replacement Of Broken Oil Drain Valve?
I have a 2016 f350 diesel dually (my first diesel).I changed the oil in the truck myself back in April and learned a messy lesson of how much pressure is pushing on 13 quarts of oil. I would like to replace the oil drain plug with a Fumoto F106SX M14-1.5 Sx series drain valve. I have only one question for everyone, have any of you that replaced your drain plug with a drain valve had it snap off while driving? I do not off road, except for driving through a campground when towing a 5th wheel trailer.
View 14 RepliesFord Super Duty (1999-2016) :: 2001 F350 - Front Rim Broken?
Tonight I went to check the air in the tires on my 2001 F350 Dually and saw that the front right rim is broken. Two of the five spokes are completely broken all the way through. So this means I am looking to buy at least one good stock rim for the front. Might buy two if the price is right. Didn't want to spend the money for 4 custom rims right now unless it is really a super deal. If you have some sitting there in your way send me a message. My Zip is 46347.
View 4 RepliesFord Super Duty (1999-2016) :: Driver Side Armrest Broken?
My drivers side armrest was broken when I bought it. Been searching for repair advise but have not found any. Instead of stopping so you can put your arm on it, it just falls down. I sorta wanted to see what I was getting into before taking it apart.
View 1 RepliesFord Super Duty (1999-2016) :: 2004 - Rear Drive Shaft Broken?
I have a 2004 F350 with a broken drive shaft.
Got the original shaft off and it has the following part number (2C34-4K145-DNA)
but I've since learned that the part number has changed but the only info I could get was 2???. 4R602DQA.
Trying to find the part number so I can find it under 750.00 from the dealer
Ford Super Duty (1999-2016) :: F250 - Emergency Brake Cable Broken?
1999 F-250 ... How does one replace the emergency brake cable? The cable in the '99 F-250 I recently bought broke.
The cable was sticking when I got the truck. I like to use the emergency brake every time I park. The previous owner(s) didn't use the emergency brake and the cable had frozen up.
I tried using it every time I parked. I could tell it was frozen, but I was hoping it would loosen up. It held a little bit when I used it; but soon it just broke.
Ford Super Duty (1999-2016) :: License Plate Lights / Housing Broken
I was just washing my 2016 superduty that just turned 3000mi and noticed the light housings and plastic are broken on the license plate lights. The one just fell apart in my hand. 55k and this happens at 3000mi.
View 9 RepliesFord Super Duty (1999-2016) :: Drop Tab Broken On Driver Door Panel
How to fix a broken drop tab on my 06 super duty driver door panel.
View 3 RepliesFord Super Duty (1999-2016) :: Broken Metal Cylinder In The Gearshift Selector?
My automatic shift selector was extremely loose. Wasn't the two bolts up behind the dash. Turns out that there is a metal cylinder with a cutaway that seems to have fallen out of the selector housing. One of the edges of this cylinder broke off as you can see in this pic:
What is this piece called and can I get a replacement at autozone/pepboys/ect?
Ford Super Duty (1999-2016) :: Broken Dipstick Tube At Block On 5.4 Plow Truck
I just finished putting a 7.3 back in one of our f450 plow trucks today, so then i moved onto our 2001 F250 5.4 plow truck. The dipstick tube was rusted in half so i pulled on the remaining half to get it out and put in the new dipstick. However, it broke off at the block. So now i cannot see how to get the rest out with out doing a lot more work. I haven't removed the splash guard yet but will i have to remove the manifold , the oil filter base, or both?
View 14 RepliesFord Super Duty (1999-2016) :: Heavy Grease Smell / Bleeder Valve Is Broken Off
2003 F-250 SD 7.3L Supercab
Problem 1: Right rear
Occasional smell of heavy grease, white smoke billowing out from under wheel well (once), black fluid leaking from lower area of caliper. Told it could be axle seal or caliper. I'm leaning toward axle since the caliper is only 1 yr old (NAPA OEM).
Oddly, I also notice a loud, piercing screech when going around traffic circles or exit ramp clovers to the right. I thought this was my trailer until it did the same thing without it.
Axle or Caliper?
Problem 2: Left front
Local mech advised the bleeder valve is broken off in to the unit and cannot be simply replaced. Insists it needs whole caliper. If pedal is all the way up there is a temporary breaking capability then it slowly creeps to the floorboard, hits a brick, and keeps rolling. Replaced master cylinder a few months ago when it same. Drove it for the last 2 weeks and problem is back.
Removing broke-off bleeder valve instead of replacing cals?
Ford Super Duty (1999-2016) :: Broken Hose Near Driver Side Front Tire
What this might be? (see pic)....
View 14 RepliesFord Super Duty (1999-2016) :: Broken Exhaust Manifold Bolts - Long Term Fix?
I've got the dreaded broken exhaust manifold studs on my 2004 F250 V10. I don't drive it much (just 50,000 miles in 10 years) and confess I've ignored the hissing for quite a while. Is there really a permanent fix for these broken studs? Or should I expect to be replacing broken studs every 2 or 3 years?
If there is a permanent fix what is it? Special studs? Special manifold? I want to keep this truck a long time and don't want to be replacing these studs every few years.
Ford Super Duty (1999-2016) :: 2006 F250 - Power Rear Window Broken?
I have a 2006 F250 Super, CrewCab 4 dr, 6.0 w/60K. Last month I tried the rear power window and .......nothing.
It tried to open 1/2 inch and then stopped, had to try to power it closed and it moved 1/4 inch and I pushed it the rest. Removed the rear cover behind the seats and I can see the motor and wires attempting to move but it does not move and I am afraid to burn the motor out or push too hard and break a cable or worse.
The track looks really dirty, I use that window maybe once every 2 months.
1. Can I replace the motor myself?
2. Can I put something in the track to clean/lubricate?
3. Should I try to open the window under power and some additional manual pushing?