Ford Super Duty (1999-2016) :: How To Remove Bed Liner
Oct 8, 2011
I have the Ford plastic drop in bed liner, and being up in the salt belt in CT, i want to take it out just to see how things look under there. Dont want to be surprised later on if i keep waiting. How do you take this thing out? Just pull the sides out from under the bed rails? You dont have to take the plastic trim that goes on top of the bed sides off do you?
Also, i want to get rid of this thing soon. The best thing to replace the plastic liner? i dont want to just leave it metal, but my dad has had a spray in "rhino liner" in his 04 ranger since the day he bought it and it has held up great. so i am thinking something along that line. How much it would be to have a spray in liner installed?
View 14 Replies
Advertisement
Long story short, ended up spilling a small cup of watered down paint in the bed. Of course some ran out the bottom as well but I'm most concerned with the bed. How to remove the paint? Since it was so diluted I figured it would wash right out at the car wash with high pressure.
View 6 Replies
1) How to get the inner liner for the front roof console (cubby and sunglass holder only no comp) out? I am planning on adding a couple of switches up there and need to clearance it in a couple of spots.
2) Is the wiring on the stock radio the same colors as the wiring harness on the vehicle side? Looking at changing out for a touchscreen (for rear cameras and bluetooth for my phone) and the one I am looking at needs to be wired in, and was looking at just cutting the plug off the radio and wiring to that instead of cutting into the harness on the truck side.
View 6 Replies
to removing the bed from my F250, there are 4 screws is that all ? and how heavy is the bed is it possible that four people can remove that ?
View 13 Replies
I heard today that, to remove the engine, the cab has to be raised?
View 13 Replies
I got a new headlamp switch for my 2016 SD. I have the XL work truck with no fog lights. I recently added fog lights and an OEM fog light wire harness. I also got an OEM switch that pulls out to activate the fig lights because the stock switch in my truck operates the headlamps only. What I can't figure out is how to remove the switch.
Here's a photo of the new switch .....
View 14 Replies
My truck has factory tint on all 4 corners as well as the rear window. I do quite a bit of night driving and I'd like to remove the tint on the drivers window as well as the passenger window. Is this even possible? I fear the glass was 'smoked' when manufactured and going back to completely clear glass will require a totally new window.
View 10 Replies
2011 F250 with hood mounted windshield washer nozzle. How do I remove the nozzle? In a campground with basic tools.
View 6 Replies
Rear-most connection before pumpkin, need to replace the U-Joint. I got the four bolts out at the flange but the shaft won't drop. I beat on the connection a bit, not enough to hurt though. What am I missing? How the heck do I get this apart and drop the shaft to replace the U-Joint???
View 9 Replies
I have a 2014 f250 with tailgate assist, How do I remove the tailgate from the truck?
View 14 Replies
Winter is around the corner and I would like to remove the chrome covers off of my 04 factory rims, the rims are rusting underneath the covers which is forcing my center caps to pop off randomly. Also I was going to get new winter tires so while they rims are off the tire i figured I would Paint them black to match better than the chrome. How to get them off easily? Also a good paint that wont chip easy when i paint them.
View 6 Replies
I have a 1999 F-250 super duty 7.3 4x4 and the rear drivers side axle seal is leaking. My question is how do I remove the axle shaft? my last truck a f150 had c clips in the diff that released the axle shaft but I did not see those on this truck. How to remove the axle shaft?
View 8 Replies
What size socket is used to remove a lug nut on a 2000 F350 4X4?
View 6 Replies
My grandad passed away a few months back, and I'm about to get his truck ready to sell/trade for my grandmother. The truck is an 09 f150 with only 18k miles, but it's got a couple minor issues like soft brakes from sitting, I'll post those problems in the f150 section if i have any issues fixing. He liked to leave the extended cab windows cracked in the summer. Problem was, he would forget to raise them, sometimes weeks at a time. He was 88 and suffering from dementia. This leads me to my question : How do I QUICKLY get rid of the musky smell? I came home this evening, and went to put it in the garage, and the windows were fogged up from the inside, and it smells awful. The windows haven't been left down in at least 6 months. This sucks, because this truck is flawless other than this. Dad had put open boxes of baking soda in it, but it hasn't worked.
View 11 Replies
No special extraction tools are required, just a small jeweler screwdriver.
Push the screwdriver into the back of the connector, to push the Red terminal locking bar loose, then extract from the front.
View 2 Replies
How to remove the side mirrors (top and bottom) on my 2016 F250? I don't need to remove the entire assembly (off the door), just need to get behind the mirrors themselves.
View 5 Replies
I have a 2015 F350 PU with the diesel, is there a way to extend or remove the idle timer, fifteen minuets is just to short in the cold country of nevada
View 1 Replies
I would like to remove the tray located under the rear sit. I don't want anything installed back in place of it.I want the open space when the rear seats are folded up. I have two large dogs and they hate the tray. Will the rear sit ride okay if i remove the tray or will it loose some support?
View 8 Replies
In my attempt to remove the auto locking hub on my 2000 F-350 4x4, I found that it would not slide out. I removed the retaing clip and the hub should of be able to come out with a couple wiggles, it seems to have seized inside the hub. I tapped it with a rubber mallet on all sides. Any thoughts as to other alternative methods of removing the hub locker ?
View 14 Replies
Since yesterday, every time I turn the key off and remove it from the ignition the truck just keeps running. Engine, radio, according and everything just like the key was still there. When I press the unlock button it shuts everything down. It is a 2014 F250 with 4500 miles on it. I don't know if I did something or what but I am confused.
View 8 Replies
I have a 'new to me' 2007 F-350SD super cab and need to run some wiring inside. What I don't know is how the heck the trim pieces are attached and how to remove them without breaking them! If it ain't held on with screws, nuts, bolts...
View 2 Replies
