Ford Super Duty (1999-2016) :: Whine Is Mostly Present In Gear While Accelerating
Sep 20, 2013
Brand new to diesels with an 02 F250, 7.3 auto, 149k, 4R100. I have been hearing a whine (not the turbo...) for the last few days and after searching the web I'm freaked out about transmission issues. The whine is mostly present in gear while accelerating, I can slightly hear it in park/neutral as well. The sound is a little higher pitched than a power steering pump, pitch rises with acceleration but doesn't FALL as fast as the RPM with shifts, it lags for just a second then drops and starts the climb again with the next gear (i feel like this is indicative of something?). Runs fine and drives like what I would think is normal, only leak i see looks to be from valve covers making its way to everything. Transmission fluid looks great on the dipstick.
View 1 Replies
Advertisement
The truck is a 2012 f250 6.2 flex fuel from alberta canada. This isn't the first tranny form out there that I've heard do this. Tranny seems fine shifts all right just a whine while accelerating.
View 7 Replies
I have a 2013 f350 with the 6.2L gas and automatic transmission...when it sits idling in gear or park it starts to whine or squeal for about 30 seconds then stops and starts again. it makes a horrible sound if you shut the truck off while it's making the noise... Ford has had the truck for 5 weeks and checked the motor for vacuum leaks and changed the torque converter...but it's still doing it but less frequently now but according to them it's louder. I have a video but don't know how to upload it. if you go to YouTube and search ford raptor whine it shows a raptor making the same noise also.
View 7 Replies
Ok so I'm having a problem that seems to have been getting worse. 1999 7.3, auto, 4 door, long bed, 6" lift. When I got the truck a while back I had a slight problem where if I was accelerating hard I would hear a clunk when it shifted into 3rd gear. I'm not hard on the truck that often so it took me a while to realize that the noise was the driveshaft hitting the floorboard right at the joint at the transfer case output.
The carrier bearing was flopping around a bit so I replaced that first. No better... kept driving the truck since it was only a problem while being really hard on it. But it's gotten worse so now when I tow (usually not more than 7-8k lbs) I have a bad vibration on takeoff at low speed. If I try to take off from a stop very hard with any load the driveshaft jumps into the floorboard. So I just replaced the transmission mount and checked the motor mounts, no better. Only thing I can figure at this point is axle wrap...?
View 14 Replies
2003 F250. 6 speed. 5.4 2v. 4x4. 165,000 miles
When purchased, there was a vacuum leak and truck ran like crap and PO drove it that way for a while. I fixed the vacuum leak, discovered a miss between 1,500 and 2,000 rpms in every gear while accelerating. No miss at idle.
The truck has:
- no CEL
- new Motorcraft spark plugs that were not dropped, bumped, or over torqued.
- new fuel filter
- new air filter
- new alternator
*The miss usually does NOT happen in the morning on the way to work after sitting 14 hours.
*The miss almost always goes away after the truck gets up to operating temp.
*The miss ALWAYS is present after work on the way home after sitting 9 hours.
Fuel pressure?
Bad COP?
Fuel Injector?
Something totally different?
View 14 Replies
My 2003 just doesn't drive right anymore. I bought some new tires and all of a sudden it crabs when on the highway 70-80 mph. I have new ball joints. Hubs, and a few other front end parts to rectify the issue with no luck. Alignment shops haven't been any favor either. Tire shop replaced the tires with sweet michelins that worked minimally. So I went to measure the wheelbase, center to center and sure enough there is a 1-1/2" difference between the left and right side. I have had a few minor bumper dings, one at appx 20 mph, but nothing earth shattering. Can something be loose in the rear end? It does feel like the rear wants to swing around and be in front.
View 8 Replies
My tuck has been making a whining noise very similar to this and only when it's below freezing out. At 5 degrees it's even louder. Just noticed it the other day. Sounds like power steering whine. I have the 6.2 super duty.
View 14 Replies
So it was -10 last night didn't have my truck plugged in fired it up this morning took a few cranks but started heard a wine under the hood figured it was cold let it warm up for a half hour went to a buddy's for a party left a few hours later driving home truck was up to temp running fine then I thought I heard a wine again turned my music off rolled my windows down and it sounded like a Cummings lopping shaking like crazy lost power couldn't make it up a hill and bogged out and died look under it and has some oil on the axle tube called for a tow truck ten time no answers so I tried to fire up again and stared and ran fine made it home no problems. My question is is it a fuel issue I use anti gel every fill up but is it still possible maybe water? Or could it be my hpop it hasn't thrown any codes or lights all pressures and gauges read fine. Also my rear main leaks along with oil pan was it just some water running through or should I be worried...
View 2 Replies
My 2015 f350 6.2 truck started making this whine noise..... Sounds like a bearing..... Stops at 40 seconds.. [URL] .....
View 14 Replies
I have a 2004 Ford F250 Turbo Diesel, egr delete, headstuds, intake, dual stacks, etc and when i turn my wheel a loud whining noise comes from under the hood, I noticed it put tension in my brakes. When I accelerate it gets louder and when i let off the gas it goes away... i checked my fluid in my steering pump and it was low so i put some more in and the next day it was all sitting under neath the truck.... any quick fix or do i need to replace the whole pump?
View 2 Replies
I'm having an issue with my 2001 F350 V10. A seriously annoying high pitched whining noise appeared a while ago, then disappeared, and has now come back.
It happens as soon as I start my truck, whether it's cold or warmed up already. it increases in pitch and loudness as I increase RPM, it also does exactly the same in neutral. As soon as I put it in gear (R, D, 2, 1) it completely disappears and will come back as soon as I shift back to P or N. Strangely, if I drive around town for a few minutes, when I get back home and shift to park the sound doesn't really come back, sometimes it will be faint but usually it's totally gone. But if I shut the truck off and turn it right back on again then it's there again.
It's coming from somewhere in the engine compartment or close but due to the nature of the sound it's very difficult to locate. I got underneath using a screwdriver as a stethoscope and listened to the transmission, transfer case, starter, oil pan and even the gastank and it doesn't sound like it's coming directly from any of them. While underneath I noticed power steering fluid leaking from the pump behind the pulley and dripping off the hose. Somehow though I don't think it's related as the sound disappears in gear and doesn't change at all when turning the wheels. I cleaned the fluid off and drove around a bit and it doesn't seem to be leaking too badly and my reservoir is totally full.
The truck otherwise is driving as good as it always has and whatever this sound is doesn't seem to be having any effect on performance (yet...) ...
View 8 Replies
I bought my 06 F250 with the V10 just 2 months ago. I have just a hair over 100k miles on it. A few weeks ago I started hearing this low pitched whine coming from the rear end - and my mechanic found metal shavings in the oil for the rear differential. It starts around 15 mph when I accelerate and it kinda sounds like a real low pitched turbo winding down as I come to a stop.
View 7 Replies
This week was our first nice week of the year. Monday I got in my truck at lunch time turned the a.c. on and it blew ice cold. Today my truck sat in the sun all day and I got in it and turned the a.c. on. I noticed instead of the normal "click" you hear when the clutch engages in the a.c. compressor I got a wine and wimper kind of noise. The system never cooled the air after this happened. Is the compressor shot? Is it safe to drive or is the compressor going to tear itself up and send metal pieces thru the system?
View 7 Replies
My 05 f250 5.4 has developed a whine that is easy to hear in low rpms. I don't think it goes away with higher rpms, but instead is just masked by the sound of the engine. It will do this in drive, reverse, and also when it is revved in park. What this could be?
View 10 Replies
1997 Super Duty 7.5 has a horrible "whine" when turning the wheels or hitting the brakes. Weird thing is, when I have the front end jacked up it goes almost completely away when turning the wheels. It is still there, and just as loud when I hit my brakes, but the brakes never were as loud as it was when I turned the wheels. I am guessing it is something to do with the steering gear or tie rod ends or something that I have absolutely 0 experience with....
More info on the problem: PS pump was always a bit noisy, but after the truck sat for a while (around a year, drove it every couple months for a few miles) it was ridiculous, so i replaced the pump, cycled all the old ATF out, made sure I had good pressure coming all the way back to the pump, several times. Never ran it dry.
The steering wheel (with wheels on the ground) kicks back on me and has a LOT of play in it before the PS pump kicks in and starts screaming. Jack the front end up, steering is nice and tight, no play, noise is there a BIT (with the hood up and cap off the PS pump) I would imagine under normal driving conditions i probably wouldn't even hear it much, if at all.
With my very limited mechanic knowledge I would assume that something is making it very hard for my wheels to turn, which is straining my PS pump, but what!?!?!?!?
View 4 Replies
My truck had devolped a whine/howl over the past coulple hundred miles. I thought it was a wheel bearing failing me. So yesterday I pulled it into the shop and jacked up the front end. Everthing checked out fine so I jacked up the rear end, started it up, put it in gear and to my surprise the noise was from the rear end.
I pulled the rear end apart and found the front pinion bearing had a defect in the race and the rollers were starting to pit out causing the noise and harshness when turning it. The truck has 130k, seal wasnt leaking and fluid looked/smelled normal. I think it was a legitimate defect not from abuse or lack of maintenance.
View 2 Replies
I am a recent new owner of an 06 f350 Powerstroke. Steering Box developed a leak so I decided to replace the box and go ahead and do the pump and hoses while at it. Pump would make some noise so i figured I'd just do it all and be done with it or so I thought. The job was a pain, much harder than the pump and boxes i've done on the older 7.3 powerstroke.
Anyways, used all OEM components (pump was a rebuilt rotorcraft, can't buy new anymore) and everything seemed great for about a day. I tried to bleed the air out per standard practice of turning the wheels with the truck off the ground. At startup and during the first day it had almost no noise at all and the steering felt much easier than the old pump.
Then the pump started to develop the standard annoying ford power steering whine that I hear all the time. Drove it over the weekend on a 160 mile trip and the noise just kept getting worse. As of tonight I can't turn the wheel if the truck is stopped even with my foot off the brakes.
I used synthetic ATF for fluid and there is absolutely no foam or aeration in the reservoir. Good news is I don't have any leaks but the bad is I now don't have power steering. It does make a much louder whine or squeak when I hit a large bump turning, I guess that's just the sound of the pump being stressed more. I am guessing the pump just crapped out but before I do it all over again.
View 2 Replies
So I have a 2016 6.7L love it but it has this vibration at 65 mph that is worse when accelerating up a hill. It feels like an out of balance wheel but I have had them balanced 3 times. road forced 2 times. My dealer replaced the driveline also. I did a test with 400 lbs of concrete bags in the bed and it was vibration free. It almost is like the pinion angle is off.
View 11 Replies
So my '99 F350 4x4 is making a clunking sound and there is a distinct jolt in the truck while this is occurring.
Symptoms: From a stop while accelerating, there is a distinct jolt and clunk. The best way I can describe the feeling is like something isn't tightened down all the way so there is a split second while inertia is generated and the "looseness" catches up to the acceleration.
When stopping, the clunk and jolt is generated when the truck comes to a complete stop. When the truck rebounds backwards a bit because of the suspension pulls it backwards after stopping, you will hear the clunk again.
I replaced the ball joints a week ago an a wheel hub bearing on the right side. I don't recall this before these repairs, but it may have been making this noise. I was more focused on the grinding from the wheel bearing so I may not have noticed the clunk and jolt then.
Where I should start looking for the problem?
View 14 Replies
Truck is a stock 2001 f250 7.3 with 205,000 miles. When accelerating or braking from about 40-60mph it starts to shake a little bit. When braking it shakes a lot more from 60 down to 40. But the faster you speed up the less it shakes when taking off. Looked at everything underneath is tight, and it has stock a stock steering stabilizer. Would a new stabilizer fix this you think?
View 7 Replies
I have an issue with my 6.0 that no one can figure out. It has been happening for about 3 years. After accelerating hard, motor will rev out like it just popped out of gear. It is still in drive and the edge cts says 4th gear usually. I have to let off the pedal and coast a bit and everything "sync's" up again and works fine. It can happen from a hard launch from a light or get on the freeway. I recently put an ATS transmission in because I figured solenoids were beginning to fail. Still does it. I am running innovative tunes with sct tuner. It had a Suncoast billet flex plate and ATS 5 star converter. I run Amsoil fluid, it is clean, red, and at the proper level. Truck has almost 80k miles. Also 37" tires and 4.88 gears. It has not done it while towing our 35' toyhauler, but I am easy on the pedal when I tow. I recently checked the transfer case and changed fluid to Amsoil. The old fluid looked good.
View 7 Replies
