GTI 337/20th Anniversary :: Way To Bypass The High Beams?
Aug 22, 2009
My HID's are only low beam and it reconizes it as high beams and high beam only...anyways i can rid of that
View 3 Replies
Aug 22, 2009
Advertisement
GTI 337/20th Anniversary :: Can't Turn On High Beams?
I have a BMP 20th and I notice that I cannot turn on my high beams but I can flash them. What the problem could be? I was planning on installing my OEM HIDs tonight but now I am wanting to get this fixed before I put them in.
View 2 RepliesGTI 337/20th Anniversary :: Low / High Beams And Blower Fan Not Working?
So I pullled into a reststop to relieve myself and when I drove off none of my lamps (high,low,or fog) worked. Along with them my blower fan does not work nor the rear defoggers, wipers, spray with wipers, turn signal (hazards do work though). Is there a fuse or relay that connects them together?
View 2 RepliesGTI 337/20th Anniversary :: Installed HIDs, No Longer Have High Beams
Ok so I installed HIDs in my stock housing, I no longer have high beams since I bought the low beam ones only and I think since there is nothing running to where the high beam wire on the oem harness my high beam light on the cluster is stuck on no matter if its on low beams or high beams and its causing my Fogs to not work.
View 7 RepliesGTI 337/20th Anniversary :: Flashing High Beams Causes Buzzing Noise And Dashboard To Light Up
Just the other day, I'm driving along and flashed my lights at another car so they can make a left turn into a parking lot. No big deal. However, when doing that, I noticed a buzzing noise when I pulled back the lever to engage the lights.
After I got home, I tested things out and found:
With my Euroswitch, I don't have any lights on during the day (no DRLs, etc). This is when this buzzing noise occurs. As it was getting dark out, I also noticed that when I pull the lever back to engage the high beams (i.e., to flash them) the dashboard would light up (like if I turned on the lights normally).
Now, if I have the park lights or headlights on already (which includes the dashboard), and flash the high beams, the buzzing noise does NOT happen.
It also doesn't happen when I push the lever forward to enable the high beams fully. The buzzing sound seems to come from the lower left, around my left knee area or near the steering column.
Why this is happening, and what the cause might be? What is the possible part that needs to be replaced?
I have a 2004 Jetta GLI 1.8T 6-speed. Seems like the old signature is gone.
GTI 337/20th Anniversary :: Radio, Low Beams, Rear Defrost Button, Turn Signals Suddenly Stopped Working
2005 Jetta Gli 1.8t. It decided to do some funky things on me today. I has been running perfectly fine up until I went out for dinner.
When I came back to start her up. Everything worked except for: Radio, Low Beams (both) Fogs, windshield wipers/fluid, rear defrost button, turn signals (but hazards worked fine) and the fan for my heater.
What was working, oddly enough are the amber lights, tails and brake lights, all other lights including the high beam, but ONLY in the position when the stalk is pulled toward the driver. (Have to hold it to keep the high beams on).
It's not the battery because my car wouldn't have started at all if that was the case. It's not the alternator because I disconnected my battery and the car ran just fine and never died. I checked all the fuses of the things that went out but nothing seemed out of the ordinary and all of them seemed just fine.
Where to look next or what to do. I have no check engine lights, or any lights for that matter so I have nothing to scan.
Ford Super Duty (1999-2016) :: Truck Only Has Low Beams / No High Beams
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesGTI 337/20th Anniversary :: Car Starts With High RPMs
I bought my gti about a month ago and every time I warm it up in the morning or any time it has been sitting over a long period of time the rpms sit at about 1300 until about a minute and it goes under 1k ... I am not to familiar with this issue.
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: High Beams Only And No Low Beams After Installing New Headlight Bulbs
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
Ford F-150 - 1997-2003 :: Low Beams Don't Work But High Beams Do
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesGTI 337/20th Anniversary :: ASR Light Not Coming Up At High RPMs
So I purchase this 20th couple day ago ( love it alot !!) but i noticed that the asr light stop working. When I press the asr switch the light comes up which i think its telling me that works. But its supposed to work when you go high rpm's right ? just wanna know since i am a totally newby in the 1.8t engine ...
View 11 RepliesGTI 337/20th Anniversary :: Idling High At 1.5 And Brakes Feel Like Going Out
I just recently replaced my radiator and cold air intake. right after I did and I drove it, my car was idling high at 1.5 and the brakes feel like they are going out. I am kind of confused as to how this is even related.
View 2 RepliesGTI 337/20th Anniversary :: Engine Sputter At High Boost
When I hit the gas and my turbo reached high boost (15 psi and up), it would slightly sputter and make an odd sound. I even noticed my exhaust made a different exhaust note than usual. While it sputtered the CEL began flashing. I then drove it normally (not high boost) all the way home and it drove completely fine. I'm gonna try and get my codes checked tomorrow.
View 9 RepliesGTI 337/20th Anniversary :: 2013 - Transmission High As Doesn't Want 4th Until 45 / 5th Until 55?
I just bought a 2013 GLI Autobahn 6 speed manual. Ive owned a 6 speed Mazda Speed6 before but I'm having issues figuring out when to shift as this transmission seems different than any other stick I've owned. Usually my shifts would be right around 30 for 3rd, 40 for 4th, 50 for 5th, etc. Seems with this its a little higher and it doesn't want 4th until 45, 5th until 55.
But it seems like at 55 The car is telling me to shift to 5th but if I do it almost doesn't want it and feels like it struggles. Same thing in 6th, I don't feel right until I'm going 70 but that seems too fast to be first going into 6th since in 5th I am over 3k rpms and in my Speed6 I was in 6th at 60 mph. Feel like I am constantly in between 5th and 6th on the highway and its annoying.
Just curious what other are experiencing and when they tend to shift under normal driving.
Prius (Gen 3) :: 2010 - Only High Beams Works / Low Beams Out
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
Golf IV / Jetta IV :: Low Beams Went Out / High Beams Functional
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
Accent RB (2012+) :: Low Beams Stay On With High Beams
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
Ford Wiring/Electrical :: HID Low Beams But No High Beams
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 RepliesGTI 337/20th Anniversary :: 2005 - GLI High Beam Doesn't Work?
I cant seem to diagnosis this and its driving me crazy. I've got a 05 GLI w standard 9007 headlights. All the lights work (fogs, drl, lows) except passenger high beam. The bulb is NOT burnt out either.....
View 6 RepliesGTI 337/20th Anniversary :: 2005 - Stalls After Running For A Bit / High Idle
The car will start up fine, run for 10 - 20 min and stall. I will try and restart it but i takes atleast 7 or 8 sec of the car just turning over before it slowly fires up. Which results in a high idle 1200-1400 rpm and the car stalling another 5 min later.
Ive fixed my o2 sensor the wire was cut, replaced the fuel filter, and got a eurojet lower pcv hose for the vacuum leak i found.
GTI 337/20th Anniversary :: High Pitch Whistling Sound When Driving In 3rd Gear
When driving in 3rd gear I can hear this quiet yet distinct high pitch whistling sound. It almost sounds kind of digital. You can hear it inthe other gears but just not as well and I know it's not the turbo or anything. What it may be and if it's normal?
View 10 Replies