I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesI have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesAfter spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 Replies2010 Prius... Both of the outside clear poly carbonate headlight surrounds have melted sections in front of the high and low beams.
View 19 RepliesI know this mod can be done on other models of Toyota, but for 6th gen Camry? And no, I won't leave the high-beams on when oncoming traffic approaches.
View 1 RepliesSo it looks like I need 9011 HIRs for my 9005 high beams, but which HIR do I use for the 11F low beams? same?
View 14 RepliesI have a 2016. I'm waiting on some aftermarket headlights and they will look great with LED drl/high beam. Have you installed them in this location ? I'm worried about fitment with the led being too big to fit in there.
View 23 RepliesI recently noticed that the high beams on my car are actually pretty dim (38k miles with them.) I've looked online and it seems fairly easy to change out the bulb but I wanted to know if there any specific bulb brand recommended and also I wanted to know how to add fog lights since I live in a part of the country where it snow alot and its foggy in the summer.
View 14 RepliesI want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.
Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!
P.S. 2005 Toyota Camry
Basically, my high beams work when flashed (pulling the lever), but they don't work when I want to leave them on (push the lever). It's obvious that it's not the bulbs since they work when flashing. I'd really like to avoid taking it to the dealership since the Lexus dealerships in my area are notorious for overcharging their customers and not doing a good job.
View 7 RepliesI don't know the official name, but it's right above the high beams, it stays lit if you just have your side lights on too. BTW, what's the purpose of it since we really don't have DRL's?
Modifying it with a different bulb, if so what's the size? Same ones as the interior map lights?
Just replaced my headlights within the past 4 months. Last night, I go to turn on headlights and nothing turns on, not even the parking lights. High beams work just fine. Checked fuses this morning - fuse for low beams is fine. Not sure why all 4 lights would fail at the same time. A fuse was all I could think of besides pure coincidence.
View 4 RepliesI'm a new owner of an 05 Toyota Prius. Im loving the car so far, however, i am having an issue with my high beams not working. After doing lots of research it looks like the high beams on the Prius comes from the same bulb, what controls the high beams is the reflector.
My low beams and all other lights are working fine. After removing my bumper and looking through all the wiring I have noticed that their are two plugs that are not attached to anything. The lights look brand new, so my thoughts are that this car had HID lights and they were then replaced to non-HID lights.
How to get the high beams working. I don't see any HID ballast anywhere, so converting it back to HID would be costly since i would need new headlight plus ballast and bulbs.
I tried looking for wiring diagrams but can seem to find any.
Here is the link to some images: Prius Photos by Izzy25323 | Photobucket
I used to think when I flash it'll turn on the high beam only but that's wrong.
Today I changed the high bulbs 9005 to a brighter pair trying to get a better DRLs, but when I tested the high beam by flashing I realized it turns both low & high beams on at the same time.
I have HID for low beam so that's not a good thing for me to flash. And I think I did it only one time in the past but now I won't do it again. Is it normal?
Anytime I turn the headlights on, the high beams go on too; I cannot switch off the high beams unless I turn off the headlights entirely (I have been driving with the low beams on during the day for the 5 years I have had the car)
I can find no reason for this; I'm inspecting the fuses (with little expectation). The only thing I can think of is the control switch or wiring. I have standard headlamps, not hid.
My high beams went out a few months ago on my 2008 prius. They told me it was the relay. I just replaced it today with a relay from advanced auto parts. My highs work now. But as of 2 hours ago I noticed my lows are no longer coming on. A few days ago I picked up the car after having aftermarket hids put in. The lows were working then highs still no. A few weeks ago I had some other relays replaced and they told me the cap was off and water got in it.
So could it be that my low relays have gone bad now too. It seems weird right when I fix my highs my lows stop working. If its possible I want to try a new relay to see if that fixes it. But I need the part number and location in the relay box. I can post a picture of the inside of my relay box, can't point to which one it is. I am sure it even has the part number on it.
Noticed auto high beams are coming on too often. When driving down the road, they will almost work and come on way too often. How to reduce this light sensitivity, that would be very useful.
View 18 Replies