Gen 2 Prius :: TS Connects To Cable, Vehicle Shows Cannot Connect To VIM
Jun 4, 2016
I have one of the versions of TS and Mini VCI. I've been trying to get this to work for weeks. I've uninstalled, then reinstalled the driver and the software about a dozen times. Figured it must be a faulty cable. So I ordered another cable(BTW, the first cable is an X-Horse, the second cable is a Mongoose.) Same result with the second cable.
I have the X-Horse firmware updater tool installed, so I can check that the cable is indeed recognised by and connected to the computer. When I launch TS, I check the setup, and can see that TS recognises and is connected to the cable. But when I try to connect to vehicle, I get the "Cannot connect to VIM" error.
View 2 Replies
Advertisement
I'm looking to run a refrigerator, a laptop and a lamp during a power outage. What inverter I would need and how to connect it.
View 10 Replies
After about a min once bluetooth connects it fails. In setup under bluetooth it says it's off and pushing it does nothing. My phone shows bluetooth on and still paired. If I was talking to someone call does not get dropped but I have to pick up my phone and turn off bluetooth so I can hear them on phone speaker.
View 5 Replies
I have a 2015 Plug in Prius and a Samsung Galaxy S5. I am having terrible bluetooth issues. It connects fine then after a minute or two the bluetooth on the cars gets turned off. I can turn of engine and turn it back on and it connects again for couple of minutes after that the bluetooth on prius shows turned off. It is terrible.
View 5 Replies
This happened several times on my way home today.
Car: 2013 Prius v Three
Symptom: Bluetooth connects and works but then stops after a couple minutes. The Bluetooth Settings screen indicates "Bluetooth Off" at this point but will not turn back on if I press the button that should toggle it. All other options on the settings screen are dimmed out.
View 19 Replies
I am unable to connect to a 2005 Prius. I have an Actron CP9190/CP9185 Elite Autoscanner. I have used it many times on other cars and many other Prii but it won't connect to this particular car. ( I have a small car lot and keep 8-12 2004-2009 Prii in inventory) I tried 3 other Prii that I have on my lot and they connect immediately and power up but this one won't.
When I first got this car in it had some lights on and I hooked it up and it worked intermittently. I had to hold the connection just right or I would lose connection. This car had some aftermarket Bluetooth or GPS system that was removed before they traded it and I had my mechanic remove the bird's nest of wires next to the OBD connector that weren't connected to anything. This was about a month ago. This car is a 2005 with 129k.
I had the battery rebuilt before I sold it. The new owner has put over 2000 miles on it since. Now the CEL and triangle are on again and I am trying to see what the codes are but can't connect. Is there a fuse that powers the connector? or is one of the pins a power supply?
View 1 Replies
It has the typical Triangle of death, brake light, check engine in the dash, along with the PS, main battery and exclamation on the main screen.
The car won't start. 12V battery is newer.
when I try to check the codes on both my scanners, they go wacko. One refuses to connect and the other goes blank, so I can't get any codes.
View 18 Replies
iPhone 5 won't connect through USB
View 3 Replies
I don't like the idea of Safety Connect, and already have AAA membership. How can I disable Safety Connect? I'm only a few months into a trial membership, do I call toyota to cancel? Or can I just disconnect some fuse?
View 9 Replies
How to connect the EVSE without charging? I'm planning to be away for a couple of days and I want to leave it plugged in but keeping the battery empty. Then I want to start the charging remotely so that when I get back, I can immediately drive off with a full charge. Unfortunately, I haven't been able to figure out a way to connect the EVSE w/o charging.
View 7 Replies
I bought a fully loaded 2004 Prius last summer with Navigation and bells and whistles. (I love it - even with 110,000 miles!) At the time I had a 3G Iphone (AT&T) and the bluetooth worked for phoning and the cord that came out of the compartment under the stereo worked for me to plug in my phone and play music. Of course there was no music display and I had to get the music going first and I couldn't view it at all while it was plugged in. (Meaning if I wanted to see the song or change to a new playlist I had to unplug it.) But nonetheless I was STOKED to have my iphone music playing. It also charged my phone.
A few months I upgraded to an Iphone 4S, and now when I plug my phone in I can't play ANY music!! (Bluetooth for phone works fine.)
Questions:
1. So I always assumed the cord came with the Prius although I guess the first owner could have put it in? Do that model came with one?
2. Most importantly: How can I play music from my 4S phone the simplest easiest way.....
View 1 Replies
I have a Sprint HTC Hero. It worked fine on my Prius. I upgraded the phone from Android 1.5 to 2.1. I thought all was OK because the phone would connect to the car. The problem is that when I make a call or someone calls me everything looks OK until someone talks. Nothing. No voices. I can't hear the other person and they can't hear me.
View 6 Replies
I was able to pair a Sky 4.0 (Android 4.2.2) phone to my 2014 Prius 3, but can not establish a connection.
View 2 Replies
This is a video on how to connect smartphone to toyota prius head unit via bluetooth, it shows the steps in details on both the car and the phone for easy connection. I hope its useful.
View 9 Replies
I had to replace my 12 volt battery a few weeks ago. I'm also having issues with my samsung galaxy s4. For the last 2 to 3 weeks the phone in the car won't connect and the bluetooth is not working. Is it the car or is it the phone? If I uninstall the phone and reinstall it does connect but there's no guarantee that it will the next time.
View 5 Replies
2013 Prius. Audio worked fine yesterday but on my way to work this morning the car would not play audio from my iPhone 6s. The Bluetooth is connected fine and calling still works but when I play music the screen shows that the music is playing but I get no sound from my speakers. I've tried resetting my phone and turned the car off and on to no avail.
View 1 Replies
My iPhone 5 links with my Prius via Bluetooth to make calls and to play music stored on the phone, but it fails every time I try the Connect To Internet option. I have entune on my iPhone. I've registered at the entune site.
View 12 Replies
I thought I would start a new thread on this issue. I recently had my car lose power and all warning lights on, I was able to coast to the shoulder and once safe I turned the car off, hoping that cycling the power would fix this odd problem. No such luck, the car was completely dead and unresponsive except for the door locks and the hazard lights.
So I hit the "SOS" safety connect button to get someone to come tow me. NO luck -- oops, I guess the car is *really* dead. I had my cell phone and the rest of the story is in another post.
Now here is my question: Is Safety Connect supposed to work when the car is off? It seems way less useful in case of an accident or malfunction if I can only call if I can turn the car on.
View 4 Replies
So all I wanted to do once I got my new Prius was set up the bluetooth. What a nightmare! Got the phone to recognize the car. Tried to upload the phone bock from my blackberry and all I got was a display saying "talking" . I waited and waited and gave up after 15 mins as I only have 50 names in the book. Now the radio isn't on when because this stupid "Talking" is on all the time. When I verbally dialed a number I tried with the 1 at the start, then without, but the area code and then no area code, and still no dial....
I have had the car 5 hours and if I could pick it up and throw it I would.
View 1 Replies
how do you connect from the amp to the deck? Im completely confused and lost. I have a 2013 prius 2 so no JBL.
View 1 Replies
We have a 2010 IV and a 2012 pip. My Android phone will pair and connect with the 2010. It pairs with the 2012, but the 2012 will then say "Connect Failed" when my phone is selected. My wife has an iPhone which pairs and connects to both cars. My phone uses Bluetooth 4.0 profiles. And after pairing I've limited it to telephone audio only. I've deleted and repaired countless times with the same result.
View 2 Replies
