My 2010 GTI with 18.6k miles has been doing great until now. After a brief stop on hwy. coming back from Florida the airbag light stayed on and the cruise control stopped working. Its at dealer's now and I got a rental from VW. Guy in shop did not seem to have a clue. He talked about a module or wiring. He asked me if car had been in a wreck - no.
View 3 RepliesMy dad has a 2005 Ford F150 and his airbag light buzzes and flashes. We counted and it flashes 5 times then short pause then 1 flash then long pause and restarts. Also I dont know if it is related but his cruise control doesnt work either.
View 9 RepliesI have an early 1999 f250 diesel. I originally googled having the airbag light on and loss of cruise control and came up with it more than likely being a bad clock spring. So I replaced the clock spring, and it was definitely blown. I have a horn now, not sure if I did before or not, but still the light is on and no cruise control. The airbag light is flashing code 27 which I believe means the passenger airbag has issues.
So I tried turning the key in the switch for the passenger airbag to deactivate it, but it only lets me turn it 45 degrees and no light comes on. It looks like the key should turn 90 degrees but maybe I'm just an idiot. I see a lot of people with the bulbs dying and running into issues but that wouldn't explain the inability to turn the key 90 degrees. Also would the airbag light being on deactivate the cruise or is that just some other issue? For what its worth, I plugged in a code reader and no codes came up, just the flashing airbag light.
Airbag light flashes on dash and then stays on. Cruise control and horn wont work. I cant find a blown fuse.
View 9 RepliesI have a 93 Aerostar 4.0 and it is displaying the blinking airbag light (3-2) and the horn doesn't work and the cruise control failed. I believe it is the clockspring ...
QUESTION: Can the clockspring be repaired or must it be replaced. I do not have a schematic of the electrical components of the clockspring ...
So i had a long drive yesterday and i decided to use Cruise Control. I rarely use it, but I have tried it in the past and it worked. So yesterday it didn't work. The light never came on in the dash and it never actually worked. I plan on mentioning it to the dealer when i bring it in next time but i was wondering if there was something i could check for myself. Such as a fuse?
View 24 RepliesI was driving today and my cruise control light came on and wouldn't turn off. i vagcom'd the car and a code came up which was:
Cruise control switch (E45): Implausable signal
P1569 - 35 - 10 ---- Intermittent
I tried clearing it but it would but the light remains on. I noticed that when i hit the RES button on the stalk, the light goes away and when that when I scanned the car and held the RES button the code would come back. My cruise control also stopped working.
The cruise control switch on my 2000 Ranger just broke. It looks like you have to remove the airbag to access it. How is that accessed? It looks like there are 2 plugs on the back of the wheel that need to be removed.
View 9 RepliesQuestion regarding a 2002 Dodge Dakota, 2wheel drive ext cab 100,000 miles 6 cylinder engine. Cruise control stopped working, get the indicator light on dash, but no cruise.
Would I start with the Clock Spring? Will Durango parts interchange? ABS Light, was told the problem is the main unit that mounts on the driver side fender. Have tried replacing with other units from the local scrap yard, but still get warning lights/sounds.
My 2010 Subaru Outback recently surprised the hell out of me by simultaneously turning on the brake warning light, the traction control light, the check engine light and (just for a bonus!) disabled my cruise control while flashing the cruise control light. I pulled over, quickly surmising that all of those systems could not have failed at 70 MPH without instantaneous death to either me or the vehicle. Both apparently still being alive, I tried turning the car on an off to reset the lights. No go. Subaru was not going to miss this chance to get me to the dealership! (who I had avoided to this point!) As I was far away from home and the car being very healthy, it seemed, I decided to drive on. I proceeded to put a couple of hundred more miles on the car before I got back to town.
My car had 39,000 miles on it, 3,000 miles beyond the warranty end. I learned that I have an error code of P0171, "Fuel Trim Malfunction (Air/Fuel too lean)". So I guess I'm wondering about a few things...why would this sensor set off every light on my dashboard and disable my cruise control? Seems a bit overblown for running a bit lean. My gut tells me Subaru has a sensor/software problem they are not owning up to. I'm a big fan of conspiracy theories and this really smells like one...
Second, jeez, I'm only 3K miles over warranty, don't you think they'd cut me some slack. I mean I love my Subaru, or did anyway, until this happened. Now it's just another POS car that breaks for no apparent reason...
So my cruise quit working AND my air bag light came on... NO codes and my other steering buttons and horn work?? everything I read points to the spiral cable since the AB light is on. But the horn works?? I don't see how the pressure switch or the brake and clutch switch would make the ab light come on...
View 2 RepliesHad an issue with "check" engine light turning on and "cruise" control light flashing, intermittently. Dealer said we had dirty oil contaminating some solenoid valves in the system but we had just done an oil change and do so every 3-5K (car has 170K). They recommended switching around the sensors and doing an "oil flush" with another oil change. The warning light problem hasn't recurred, in the past month, since we started giving the gas cap a few extra turns after a fill-up. We're getting ready to buy a new car and don't want to give what might be a serious problem over to the next owner.
View 6 RepliesThis has happened only once the other night. I was cruising about 50MPH, hit the brakes for a red light, while I was at the red light the Cruise Control light started flashing. The cruise control would not engage at any speed during the flashing stage, and I didn't think it would as a flashing light usually means a malfunction. I went a few miles turned the car off, restarted it and haven't had a problem since. Just chalk this up to a 1 time glitch?
View 8 RepliesIs it plug and play. My cruise control hasn't work. Numbers look right on vag and switches/fuses are all good. So I am left to assume its the stalk.
View 2 RepliesWhen I bought my R32 at the end of last year the cruise control didn't work. The light doesn't come on.
View 8 RepliesOn my commute home today I tried to engage cruise only to find that would not engage. I cycled the switch a few times but that didn't work. I told a friend of mine about it and he mentioned that he experienced problems with his cruise on his GTI after he had switched the units on the MFD. Even though I didn't switch my units, when I got home I put the car in park and changed the units from U.S. MPH to KM/H and then back again to U.S. MPH. Lo and behold, cruise worked again afterward. Strange.
View 15 RepliesHaving issue where the set- on there cruise control doesn't work? I can set the initial speed, and increase it with res+ but I can't decrease the speed. This is difficult because I cannot unlock my ecu and change programs. I have a mk6 2012 gti.
View 6 RepliesRetrofitting Cruise Control on GTI? Where it goes? Turn signal lever or steering wheel? Coding and/or adaptation needed?
View 3 RepliesI just purchased a low mileage R and trying to figure out if the car has been chipped. Not sure if when doing so you lose functionality of your cruise control but my cruise does not work and I am trying to determine how I go about checking the ECU on this ride.
View 5 Replies2007 RX 350 my cruise control light will not come and cruise not working. I use cruise control frequently and know how to turn on& off, set, etc. It is definitely not working. Also, "AFS off"light on RPM gauge. Is this a fuse issue? If so, which fuse? Pulled engine fuse box and AMP did not matchup with what manual said.
View 2 RepliesNeed coding info for 2010 Jetta sedan 2.5 Air bag control module. The part # is 1K0 909 605 AD/004, Component # Airbag VW8R 036 8900. I am using a Vag-Com version 10.6 ....
View 1 Replies