Golf/GTI VII :: Front Wobbles While Steering Wheel Turned?
Jun 4, 2015
For the past month or so, I've noticed an unsettled "wobble" of the front end of my 2015 GTI SE PP when backing out of my driveway and turning the steering wheel. It feels like the front end is extra nose-heavy (yes, it's a front wheel drive car- I get it) or like the steering is too boosted and is over steering beyond my inputs. I am now noticing it when I enter a driveway going forward with the front wheels turned.
Tires (the god-awful all-seasons) are at 37psi, alignment should be fine (no potholes, curbs or off-road excursions) on a 4-month old car. No suspension mods yet. I had each side up on jack stands looking for suspension pucks in the front and found none. This is really impacting my enjoyment of the car and what to check. I'll be putting the front up again this weekend to look for any bent suspension pieces or loose parts.
View 8 Replies
Advertisement
I have a 2007 hyundai elantra gls (80,000miles) that shimmies at 12 and 40 mph. The steering wheel stays still but the rest of the car wobbles.
I've replaced the tires and the rims and had them rotated, balanced and hub rings put on.
I've also replaced the motor mounts. (This is probably unrelated but I also just had the serpentine belt, water pump, and all the other belts replaced as well.)
I can hit the gas and get through the wobbly speeds and it seems to be fine....but I drive around 40 mph most of the time!
View 6 Replies
I have a 2012 Explorer Limited with 95K miles. Under medium to hard braking, the steering wheel wobbles, and the car slows irregularly. I'm struggling to find the best word to describe. It's not a vibration or a shudder. It's like a pulsing that is slow enough to be counted. The car doesn't pull to a side under braking, either.
I put a dial indicator on both rotors, and they are nearly perfectly flat. There is no evidence of a leak anywhere. The only think I noticed is that the DS caliper had a little more pressure on the rotor, making the rotor harder to turn than the PS rotor.
View 3 Replies
Snap or crack sound emanating from the front end whenever the steering wheel is turned or the suspension unloads/loads?
I've noticed it for awhile now but didn't think too much of it but now that it's warmed up enough for the windows to be down, it's starting to annoy me
I read the TSB a few months back regarding the rubber coupling in the MDPS unit but it seems more like a suspension noise to me.
View 4 Replies
I have a F250 SD with a 6.0 diesel. My steering wheel is loose. I tested and know for sure is not a problem inside the cabin. Fallow the line thru the linkage to the steering box by the left front wheel. I found an adjustable switch there. Just on top of the steering box. It has a lock nut that must be loosen to adjust what it looks like a hex. Very hard to reach. I have watch some Youtube videos but on different vehicles.
View 1 Replies
I have a 1999 f350 7.3. I'm having a problem where the steering wheel shakes back and forth and the whole truck wobbles. It happens at all speeds, but shakes faster at faster speeds, slower at slower speeds. At first the wheel was just jerking randomly but then I made a right turn, heard a pop, and then it was shaking like crazy. I jacked up the truck and checked the ball joints, checked for and play in the tie rods, and turned the wheel left and right. Everything seems ok so I can't figure out what is causing to wheel to go back and forth.
View 2 Replies
Took delivery of car and alignment is way off. Steering wheel is turned left when car is straight. The dealership is trying to charger me for a alignment. Car has 2500 miles on it and came from factory this way.
View 8 Replies
I've had the pleasure of getting towed out of my own apartment complex earlier this morning. Parking placard fell off dashboard so it was not visible.
Regardless, I go to pick up my car from the lot. I'm cranking my steering wheel right and before I could even fully pull out of the stall, I hear and feel rubbing coming from the front left fender. I get the same symptoms in the right fender when I crank the wheel fully to the left.
This is the FIRST time I've experienced rubbing. Keep in mind that I'm sitting on h&r sport springs, oems wheels and p zero tires. I profoundly let the manager know my issue and he told me they'll have their mechanic take a look. They obviously took the position of no fault on their end.
I'm not mechanically inclined but I'm wondering if improper or misguided towing instructions could be the culprit here.
View 1 Replies
VWVortex, so I've had some issues with my MK4 recently (go figure). It started with steering wheel getting intermittent and random jerks to the right after driving for about 20 minutes on the highway at any speed any gear but only at around 1/6 throttle. I needed to do front end maintenance anyway, so I replaced both complete LCA's with ECS Tuning's ply ones, went stage 2 BFI engine mounts, stage 2 BFI dogbone mount, both ball joints, both tie rods ends, both axles, and an alignment.
Now I'm getting a shimmy in the steering wheel starting at ~80mph. I know my wheels are slightly bent and are being replaced in the summer when the weather is warmer, but it wasn't doing this same shimmy prior to all this. Just the jerking. Could it be they messed up on the alignment? Its really getting on my nerves considering I've dumped a lot of money trying to fix this problem just to have something else pop up.
View 4 Replies
Brake issue I am facing. Last year maybe 13 months ago i changed my front rotors along with new brake pads. (centric rotors and hawks ceramic pads on both the fronts). Now after 11000 miles my cars has same issue that i had a year ago. Which is when i brake the steering wobbles. last year the mechanic said it was due to warped rotors, so we replaced everything cuz he said it was too bad to resurface it. Now after 11k miles same problem. And the local tune up shop said my brake fluid is low as well. My two younger sibling drive this car as well .
View 2 Replies
1992 buick riviera 3.8L
So working on the steering column I had to remove the lock plate. Everything went well with my repair, I have the turn signal switch installed but I can not for the life of me get the lock plate spring pushed down far enough to slip in that little ring. I believe the part I am having trouble with is the top bearing inner race. Here is a link to how this looks exactly on my car.
[URL] ......
AS soon as i took off the spring that pushes the lock plate I noticed this race was just loosely sitting and the steering column just wobbles around. What am I doing wrong?
I did this in this order. I just moved the top bearing inner race as far back as it will go (it still just wobbles around with the steering column). then I put the spring in so that it touches the race. finally I place in the lock plate and compress it with the lock plate tool. However it simply will not compress enough for me to slip in the ring and lock it in place. Am i doing something wrong ? Is there some part of the bearing that should go in before this race?
The picture with the red background is how I am inserting these parts. The spring sits on this race but I cant compress it enough. Like i cant get it aligned properly or something.
View 4 Replies
I was sitting in a parking lot waiting for someone for about 2 mins when I went to drive away I turned the steering wheel and the car stalled. This never happened to me before it has not happened again yet. I did also have the A/C on if this makes a difference. I figure the ac clutch engaged at that same time or some fluke thing happened.
View 4 Replies
Having issue when turn steering wheel so slightly either way there is a clunking in the wheel? I took my car in for some maintenance yesterday and 1 was to look into seeing what it was. They said a couple of cars came in like mine and it was a gear on the end of the column that the teeth are worn or even broke. The gear isn't expensive but the labor is. I am also getting the 60k mileage service as well. I should've gotten the extended warranty. Gonna be about 650.00 but i love the car and i`m planning on keeping it and once its done the wife gets a new one, i keep this and get rid of our 98 malibu.
View 3 Replies
I just bought this nicely used 1991 GMC Sierra 1500 series pickup truck for $650. It started up and ran fine when I gave the seller the money - the few leaks in the break lines.
Easy fix right!
So my son (19 that knows it all) and I went and changed all the brake lines (made everything one size 3/8 line.) Filled it up with break fluid and started the truck. I had my so pumping the breaks and holding them (his first time) I bled the far rear (passenger side) then I had him turn the steering wheel to the right so I could bleed the front driver side.
He turned, and turned and turned until the engine died.
Now the truck only runs when the steering wheel is turned all the way to the right or all the way to the left.
Going to pull the codes to see what the heck is going on....
View 9 Replies
About a month ago, my 2010 RX 350 that has 60000 miles started making a creaking noise whenever the steering wheel turned. My steering column has exhibited the squeaking noise that most of these RX models do since I bought it and is oiled every time I bring it in for service. This creaking is much louder and very annoying. The service provider told me they did not know what was wrong and the only solution was to replace the whole steering column, which was a $2500 part. I have a total lemon and have already had all the suspensions replaced.
View 9 Replies
2003 Prius - While driving I am notice a howling noise whenever I turn the steering wheel to the left. There is no such noise when turning right and there is no such noise when I turn the wheel to the left while the car is stopped (and the engine is still running).
Is this due to a worn bearing in the steering hub?
A worn wheel bearing?
A worn out drive shaft gear?
I want to know what to look for before tearing the front end apart...
View 13 Replies
My Touareg started to have a weird sensation recently. As I turn to the Left the vehicle turns Left more then my steering wheel is turned, It seems to dive in that direction. It just started do do this going Right also. I thought I saw something on this topic before but was unable to find it.
View 13 Replies
2002 sc430 73k miles.
I have a slight steering wobble (not really shaking/vibration) at higher speeds and only when I turn the wheel to the left or right a little (maybe a 1/2 inch). If I am driving straight down the highway it is smooth at any speed 40-90mph no issues. If I move the wheel to the left or right I feel the the wobble in the wheel. If I go back and forth a little, constantly, with the wheel it continuously wobbles.
I had recently addressed some other vibration issues by installing new LCA #2, continental DWS tires, and had the front end aligned (front -.3L and -.5R for camber, Rear -1L and -1R camber, front and rear toe set to -.07, if I recall). I couldn't really remember if I felt this wobble before because the tires and LCA's needed to be done badly. I am not sure if I should replace the struts either since ride feels good.
My steering feels darn good and responsive at low speeds and does not wobble when turning the wheel slightly. I have purchased new oem steering rack bushings but have not installed them yet (purchased as a preventive maintenance part when i had some free time, before I discovered this issue).
I have read a few threads about alignment of the steering rack causing issues if it is not perfectly centered. Not sure if that would cause anything like this. Love driving the car but the wobble is rather annoying when i turn the wheel a little to change lanes at 75mph.
View 10 Replies
so i got a set of saw blades of my buddy for nothing. before installing the car drove true and after lowering and putting adopters and saw blades on the passenger side wheel wobbles and pulls to the right its pretty much all over the road and cant for the life of me figure it out. only thing i can think of is axle or wheel bearing but there's no movement in the wheel when i move it side to side. only the right side seems to have this issue.
View 2 Replies
Is there any quick fix for this? My steering wheel is slightly turned when the wheels are pointing straight. I thought a wheel alignment would fix this, but it didn't.
View 3 Replies
I had a friend do an alignment on my truck yesterday. Afterward, we tried to center the wheel the best we could in the shop. But when I drove it home I noticed that when going straight, the steering wheel is ever-so-slightly turned to the right. Is there and easy way to adjust this without me going back to the guys' shop and bugging him again? I know the alignment is dead nuts, but the wheel is just a tad off.
View 4 Replies
