So I changed transmission fluid on my 1.8t GLS because I was having difficulty shifting out of gears on cold starts. It seemed to work fine for a few days and now I'm back to square one, it still doesn't want to shift correctly!
View 14 RepliesI went on vacation for a week and left my car at my parents house. I came back and now it has become extremely difficult to shift between gears. It's nearly impossible to get the car into reverse, extremely difficult to get it into first, makes a thud when pulling it out of first, is semi difficult to get into 2nd, but only a mild nuisance to get into 3rd through 6th.
For more information, the car is a 2012 Volkswagen GLI with just shy of 40,000 miles. The car ran just fine before I went on vacation and the car was not moved while I was on vacation. I did notice that a little ticking kind of sound when I had the car in neutral with no clutch. So the throw out bearing was starting to wear, but it was a very slight. But I haven't had any other problems.
My 03 Gli 24v manual transmission has been acting up lately. First it started to get a little difficult to shift into gears about a week ago. Then tonight i was driving through a parking lot in 2nd, and after i came to a stop i tried to put it back in to first and it would not go into gear. As i was trying to get it into 1st i could tell it was grabbing a little bit and the car was inching forward.
I got it to a parking spot and starting reading about other peoples issues, one i read said they were able to get it to move after pumping the clutch some. After trying that i was able to get it into gear and drive it to my parents. Looked at my brake fluid and its full. Took it for a test drive around the neighborhood and it was shifting fine at first then started getting a little difficult to shift again. I tried taking off in 6th and it stalled. I tried going from 1st around 3k-4k rmps to 6th and it was still driving with very little lugging. My clutch feels and is still stiff, not loose at all. I do have to go all the way to the floor with the clutch before im able to shift
Finally to my questions. Could my clutch be going bad? Could my cables need adjusting? Something I read about a pressure plate maybe?
I have a 2005 2.5 vw jetta.
It has 150,000 miles....the cars been working just fine untill DEC of last year. I had the dealer check the transmission fluid and they said it was low....so they flushed and refilled the transmission oil...they didnt see any metal but that didnt fix the problem.....
Now i have the car not shifting correctly ....theres a delay when shifting in all gears but it is intermittent, sometimes it shifts hard and sometimes you can just baby the throttle and it wont shift as hard.....once on the freeway the car runs fine......but when coming to a stop you can feel the downshifting.....
I figured it has something to do with the valve body....my concern is the dealerships have quoted me 2000$ to replace the valve-body....the cars paid for and was wondering if i should just move onto a different jetta or fix this one?
If i fix the valve body will this jetta have the same issue later? Also i do have the vacuum pump leaking engine oil....not much can this be fixed while doing the valve body job???
2009 Kia Sorento. The Transmission was replaced twice last week and the week before. For the same problem. 50K miles. Auto Transmission...
I have a hard shift between 3rd & 4th gears, I have had the transmission replaced twice. Could it be something else?
I've got a 2003 Xterra, RWD, manual transmission, with around 110k. It's been giving me a little trouble shifting into gears 1-3 when the weather's below 30F. It started doing this when I got the transmission fluid changed last, about 2 years ago. I took it back to the mechanic who fixed it immediately, and he changed the fluid a second time for free, but when the problem persisted, he said he had no idea. Needless to say, I haven't gone back to him. Since then, I've tried to ignore it (not too hard in sunny NC), but it's getting worse and I'm about to move to Chicago, so I think I should fix it before I move to the land of harsh winters. My first guess would be the tranny fluid weight might be a little low and I should try a heavier weight.
View 13 RepliesI have a 2004 manual transmission Santa Fe. I've maintained it very well since new.
About 6 months ago I noticed it was getting difficult to manually shift gears. It wasn't grinding or anything, just "hard" to get it to go into the various gears while driving. Before, I could shift into any gear with just 2 fingers on the gearshift and it was smooth as silk.
I went in and had the gear oil changed. This was something I didn't even know needed to be changed and the guy said most people never do. They showed me the oil they took out and it looked more like black water than oil and smelled kinda funky. They changed the gear oil out, but still no difference, and in fact it's getting worse.
The best way to describe it is the only way I can really shift gears now is to find that "sweet spot speed" where the gears will change on their own (so to speak). I find it particularly difficult going from 1st to 2nd, such as when starting from a stop light. People almost rear-end me now as it takes me longer to get it into 2nd gear.
Once in gear it runs perfectly, no problems. The clutch seems to be working normally, except perhaps while stopped in 1st gear, it sometime seems to jerk a bit, and I find this most noticeable if I'm stuck in very slow moving heavy traffic with the constant stopping and then moving forward slightly and such.
It is almost impossible to "gear down" into a lower gear unless I'm at the speed where it would normally go into that lower gear on it's own. The best way to describe it is how it is possible to drive a standard transmission car WITHOUT a clutch if you shift at just the right time/speed. But I DO use my clutch, but if I'm not close to "that speed" it's really, really difficult to force it into another gear, and the few times I do try and force it, I'll often get a bit of grinding.
So I recently purchased a 2007 LS460 with 115k on it. I've noticed that about a month ago the car started driving pretty weird. The transmission would shift hard and jerky almost through the first 3 gears, like driving a manual.
Also, when I tried to floor the car from maybe 40-50mph, the rpm would shoot up only 500 then downshift and accelerate causing a violent jerk. It feels like if I was driving at 50mph on 8th gear, when I floored it the car would feel like it downshifted to 7th gear for merely less than a second and downshifted again to 4th gear causing the car to jerk hard.
This is the car's history:
- Reset the ECU by disconnecting the battery (no luck)
- Auto transmission software has been updated at the dealer
- Valve springs recall has been completed
- Head covers has been changed
- Engine module has been reprogrammed by the dealer at 70k miles
- Trans fluid has been changed at 70k miles according to lexus.com service record
So at this point I really don't know what could cause this problem anymore, maybe it could be the transmission fluid?
I own a 2000 Jetta auto with 200k on it. I have the same problem. It wouldn't change gears till 4000 rpm i scanned it. And got the cods g38 and g68. So I changed both. It was working fine then again same thing it works then stop works. So scanned it again and got same codes changed them again worked fine then stopped working so I took it to vw and they told me same thing same sensors and the wire harness so I changed them again got the parts from VW this time. It was working then stopped. And when I turn on the car and drive my gear box display goes all black for at least 10 min driving then goes back to normal. But sill doesn't change gears. Now not even after 4000 rpm. Ps. When I do it manual 1st gear 2 and changes fine once I put it on drive doesn't not change gears.
View 7 RepliesMy buddy's 2001 7.3L F350 has had 3 transmissions. Rebuilt and used. Once the new trans is in he goes like 15 miles and then is starts shifting hard and grinding gears. What this could be?
View 8 RepliesGot a 02 Jetta 1.8T 5spd auto tiptronic with 100k miles. Having issues with shifting. Trying to determine if its electronic or mechanical. Had a short in solenoid 10 N283 which melted the TCM. Put in a used N283 to see if the trans is still ok mechanically. Plan is if its ok to put new fluids and solenoid pack. What do the experts think does is need a full rebuild or will new electronics do the job?
After putting the used N283 solenoid the trans works but not correct. The problem is in the shifting only. Feels like its out of time. When you start moving from a stopped position from 1st to 2nd the car takes off good but when changing gears it reves and feels like its slipping then it hits hard into 2nd. Then 2nd-3rd is a fast shift and not hard. 3rd-4th slips and revs a little then changes gears 4th-5th is fine. all down shifts are fine. Does not mater if the car is hot or cold its the same.
If I disconnect the MAF 1st to 2nd shifts fine with no problems. 2nd-3rd little rough but not bad. Problem with disconnected MAF when going in Drive at 30-40mph all of a sudden it jumped into 1st gear and felt like I was slamming on the brakes.
With the MAF connected and I shift manually in tiptronic mode each gear runs real good with no slipping at all. But same problem happens when switching gears. I can drive it smooth if i accelerate to 3000 rpm and then left off the gas a little and it shifts fine.. Same with the other gears.
I got a used TCM to rule that out and the problem is close to the same. It tries to shift at lower rpm but still does about the same problem. I did recently had a MAF go out. Put in a new bosch and no change. Did my VCDS scan and only codes I get is "17840 secondary air". I can get operational data on some solenoids but not sure what parameters to look for.
I've had 2 Elantra 2012 models 1 a gls the second a limited. As far as transmission issues both Elantra's from a cold start after allowing RPM's to idle down before taking off they both have started shifting hard going from 1st to second gear 1st car was around 8-9 k miles now 2nd started at 3 k miles. Since owning 2 cars same make same year same transmission and many times to dealer 1st car ended with Transmission replaced 2nd has now started doing the same thing they reset adaptive and next day did it again its now back at dealer waiting for them to diagnose again.
View 13 RepliesWhere to check my trans fluid level and looking for info on changing the fluid (The process). I'm pretty familiar with mechanics and changing fluids this is just my first time on this car.
View 11 RepliesLong time listener first time poster. My wife has a 2009 Vw jetta 2.5 with a manual transmission that is very hard to shift. It has 80,000 on it and has had the clutch replaced once. She told me that she never had any problems shifting until she let it sit for two weeks while she went to cape cod. I have driven it myself and can confirm that there is an issue. Sometimes it just will not go into gear. No grinding noise at all and very very stiff when moving the stick shift laterally from first to fifth. Not actually shifting from 1-5 just moving the stick across the range it feels like cement. I have already changed the transmission fluid and used the Vw oem oil. I also removed the shift boot and lubed all the moving parts with a high quality grease. Tomorrow I am going to bleed the clutch slave and have a good look at the shift linkage. Is their something I am missing?
View 5 RepliesI have a 2004 jetta gls wagon with a 1.8t. the car ran just fine and had a tune running 16psi strong. I changed the battery in it and now the car wont boost, bogs out and SLAMS hard from gear to gear ( auto 5 speed ). I don't have vag com. I just need to get the car to drive with out it. Even if i get back to factory tune im ok with it.
View 8 RepliesMy 03 Jetta is having transmission trouble. It will shift from 1st to 2nd but wont shift to 3rd. It is an automatic 2.0.
View 10 Replies2011 TDi 6 Speed (Sportwagon) with problems shifting into 2nd? Mine is currently in the shop under investigation for a balky shift when cold. The tech says it's not right, but then they find another vehicle in inventory with the same issue...currently waiting on a VW engineer.
View 16 RepliesSo I have a 2.0 automatic golf GLS. Its the last of the MK4's but a 2005 model. So this is what's going on. When I drive the car for awhile the transmission (I'm assuming gets hot )& Im at a stop & start from 0 the car struggles to change gears. The rpms go way up into 5k sometimes 6 just to go to second gear, And then so forth. This only happens when I drive around for awhile. My dad just flushed the transmission fluid after my car refused to change gears. It was stuck in a high gear from my assumption & it was always a lot of work for the car to build up speed. What's going on with my tranny? Is it the solenoids? Valve body? TCM? Car is at 104k miles btw
View 8 RepliesOver the past few weeks, my car (2002 Golf 2.0L) has gotten really hard to shift into 1st and reverse (has crunched once or twice), but only when the car is hot, after driving it for a little while. When this happens, and I try to shift into reverse, the shifter feels really "sticky" and can get kind of stuck in the depressed position near reverse.
I bled the hydraulic system and replaced the slave cylinder, but no dice. I haven't noticed any clutch slipping. Shop wants to replace the whole clutch. Is this the right answer?
When it gets hot outside and the car warms up (15 mins or so of highway driving), the stick gets extremely hard to move and it doesn't go back to center when it's out of gear. So I could push it all the way left or right without putting it in a gear, and it would stay there, it wouldn't pop back to the center like it should. It becomes really annoying and difficult to drive because it gets so stiff and hard to move, what could be causing the problem? I've already adjusted the shift linkage and that didn't work.
View 3 RepliesI have a 99 Jetta GLS that is leaking trans fluid in possibly 1 of 2 places. one is coming out of transmission pan seal. If it's the 1st one how would that be replaced. [URL]......................................
View 2 Replies