My VR6 is making a ticking sound when i accelerate, between 2800-3100, then it dies down a little and then gets loudest at about 3600-4000. The noise stops at exactly 4000rpms every time. Here is a sound clip of what the noise sounds like... you can hear it best in the last 15 seconds or so in the video. Maybe its the timing chains...
[URL] .....
[URL]
What in the world is this clicking/ticking noise? It is the loudest thing in the engine bay, and as you can hear, it does NOT sound normal. It appears to be emanating around/under the fuel rail.
I've had a weird problem pop up within the past few weeks. My engine seems to have a noticeable whine above 4000 RPMs. It sounds almost like a supercharger whine, but my engine is completely stock. Possible problems I found online include exhaust leak, vacuum leak or tensioner issue for the belts.
Another issue I have had is that whenever shifting into second gear, I have some difficulty getting it into second gear. It makes a scraping sound as though the clutch is not disengaged all the way. On occasion, I have also had the shifter kind of pop second gear out when continuing onto third or even feel like it is rejecting second gear sometimes. A friend of mine told me that the scraping sound is normal and, "that's just how manuals are." Doesn't seem normal to me especially since it is every time I shift to second gear.
While switching freeways yesterday and shifting down into 3rd before hitting the exit ramp I heard I a slight clunk, and then this continual noise began. I initially wasn't quite sure if it was my car or the sound of the of the large semi engine braking in front of me so I continued on to the freeway and was able to shift back up to 5th and get to speed.
However, I held back to around 60Mph because the noise started to worry me as I continued to hear it after passing the 18 wheeler semi. I got off at the next exit and noticed that the noise ONLY occurs when the car is decelerating. It happens in every gear as well as neutral; having the clutch in or out doesn't make a difference either.
*When accelerating in any gear, even the slightest bit, the noise disappears.
I've scavenged the forums to find a similar issue but to no avail.
I've uploaded a video that shows the issue occurring. The video is taken from the driver's side wheel, but the sound resonates throughout the front of the car, can't really pinpoint where though.
2002 Jetta 1.8t possible transmission noise
[URL] ....
2002 Jetta 1.8t ... 210k Miles
I've recently replaced the Control arms, outer tie rod ends, ball joints, springs, struts, all for rotors/pads, rear calipers, handbrake cables, timing belt (with pulley kit) water pump, etc. full syn Oil changes every 3k-3.5k miles, Premium petrol only.
02J-EGT 5spd. OEM axles.
Sounds like it's coming from the front. I noticed a few months ago my inner passenger CV boot was cracked, put motor mount spacers in which should have hopefully brought that axle up to okay standards. My initial reaction is to say the howling is from that CV joint however it's very odd it only happens after 35 and when I'm not heavy accelerating or deaccelerating- only when holding the car at a constant speed.
This also came after doing the TDI 5th. I notice it a little bit after passing 35mph in 3rd but really can hear it in 4th/5th when the engine revs drop. Am I right in thinking CV boot? Or transmission internal?
I've got a misfire problem with my Focus. It started about a month ago and did not trip a code until last week. It stumbles on acceleration between 2,000 and 4,000 rpms. It is only a slight stumble and although noticeable, it does not impede driveability much. Last week I was able to get it to finally trip an OBD code. P302 - Cylinder 2 misfire. I changed the plugs and wires with no effect. I thought I had it narrowed down to the coil or injector until my wife noticed a new wrinkle.
Under normal driving conditions the misfire is annoying, but my wife found that if she turns on the A/C, it is undriveable and will not accelerate past 30 mph without some patience and a neck brace for the bucking. My first thought was the A/C compressor was freezing up. I turned off the A/C and left the blower on and it would not stop missing. I turn off the blower and it smooths right out to the annoyance I described first.
Right now I drive the car without A/C and blower whenever I accelerate. If I'm going a steady speed, all is well and I can run the blower and A/C.
I've noticed lately, that when I do some spirited driving, my rcf is making this weird raspy type ticking noise from around 2500 rpm to 4000 rpm. It definitely doesn't sound normal...
When I take my car in for body repair next week, I plan on having the dealership change the breaks according to the TSB issued and also checking out this noise.
Weird noise - searched .. couldnt find anything mainly because its kinda hard to describe it .. While in 1st and 2nd gear at low rpms while barely giving it any gas there is this "ticking" noise coming from under the hood .. it almost sounds like .. lets put it this way .. it sounds like a wire coat hanger .. tapping an aluminum can .. how about that .. I was told it is my flywheel bolts backing out and was a problem around 65-75k .. and I am at 70k at the moment... Should I just bite the bullet and get a new flywheel and if so ..[IMG] [URL] ....
View 6 RepliesI have a 24v GLI with the O2M 6-speed trans. This morning while leaving for work I accidently let the clutch out while in gear and my e-brake still on. Heard a really loud bang and the engine didn't stall out (which it should have). Now I have no engagement in any gear and there is a very loud clicking that changes with RPMs. Did I blow the CV joint, or is this something much worse (blown diff, destroyed clutch, etc.)??? I'm border-line freaking out!
View 9 RepliesSound shown in video. This is when vehicle is idle, as rpm's change the sound becomes more frequent. Check engine came on about a week or two ago, not sure if its related (haven't gotten the chance to get it read yet).
[URL] .....
So I drive a 2008 R32/U.S. spec and I was in neutral when I pressed the throttle and it would not rev over 4000 rpms and was wondering why??
View 24 RepliesI am getting a ticking noise under hard acceleration. Dealer told me the exhaust is touching the heat shield but did nothing about it. It's driving me crazy...
I may have to pull the trigger on this Borla I found for 700 shipped and new. Trying to keep my promise to myself to drive the car stock for a year b4 any major spending. That's out, I can already tell.
Noticed it when I was driving with the windows down today. It's a pretty noticeable ticking noise coming from the drivers side and gets faster as my speed increases. I inspected it and noticed nothing touching the wheels.
View 2 RepliesI am hearing a rumbling noise when I hit 4000 rpms on all gears worst in 2nd and 3rd.... I just recently replaced the timing belt, TBA Done, valve cover gasket, and passenger side axle (through raxles). Anyways I started hearing noise after those repairs, my mechanic has gone through all the work recently done and cant find the problem..... We replaced the tranny mount thinking it was that, but no luck.... I have not lost boost, and noise starts 4000k and goes away at 4700k No codes are flashing.
View 5 RepliesI recently had a good amount of work done to my Mk4 R32. Last night on my drive home from the stealership I ended up with a passenger headlight out and a very loud clicking/ticking noise which seems to be coming from the Serpentine belt area. After closer inspection it looks like the tensioner lines are't lined up which means my belt and tensioner need to be replaced? I'm not sure, but I have a video and this picture.
View 7 RepliesI've a 02 Jetta GLS - 2.0 engine..
About a week back, I have started to hear a ticking noise from the hood. It is exactly same as someone else posted video on youtube below:
[URL] ....
What could be potential problem areas?
Mk4 12v vr6 afp. 170k ish. No real mods except a cleaned up bay. Was death knocking LONG before I started the bay. Probably 6k miles. My car knocks/rattles bad in low rpm but promptly stops all noise at 4k and up. Makes the noise in any gear but only when throttle is applied. Even does it when revved up in neutral. No CEL other than one explained later.
Suspecting wrist pins as con rod bearings are brand new (replaced for no reason they were fine) and i removed head and no problems were found. Lifters tick a bit but that's all. Cleaned and put back with new headgasket. Shined up the pistons of course. Timing chains also done. <10k miles on oil pump. I even tried taking the shifter rod completely out and driving to verify if that was the rattle and no change. What could be left mechanically?
I was afraid the noise was preignition because I was getting codes for knock sensor out of range, so I replaced the knock sensors multiple times each, coil pack, wires, new ngk bkr5e plugs gapped correctly, fuel filter and pump. Have ran multiple tanks of premium 94 from different stations as well.
The ecu pulls timing back to 0 btdc and it is still knocking so I just decided that the knock sensors are picking up a mechanical knock rather than pinging. Only thing left is wrist pins or piston slap. Maybe injectors causing a lean condition?
Here's a pic of my car for attention ....
MKIV Jetta wagon 2004. Bought used last year. Four previous owners with 125K on it.
Problem: After oil change where I previously had 5W-30 with valvoline dino, I changed with a different brand 5W-30 (Peak brand). Ticking noise started immediately from engine area usually only after it got up to temperature. Also using different oil filter. Initially not sure if it was injector or lifter tick. It ended up being lifter tick, and the give away was when going down a small hill and the engine downshifting, the increase RPM caused the tick to increase at the same rate. So here is the path I went down.
1. Swapped out oil filter - no change. I thought this might work because I was using a fram tough guard.
2. Added some rislone with ZDDP additive. Quieted down the valvetrain quite a bit, but did not solve the problem
3. Added rislone engine treatment. Got better, but still not totally solved.
4. Tried to "drive it out" and get some mileage on the rislone . Didn't work. Definitely better though
Finally, after all that I figured let's give my baby some of the thick sauce. So I pulled out a quart from the diptube with my suction device and put in a quart of 10W-40. Almost immediately PROBLEM GONE. So either that crappy peak oil doesn't have the viscosity that it advertises, or the valve train is just getting old and needs a little bit thicker oil in the summer. Probably both. I will also keep using a small dose of the ZDDP additive to extend the life of the valvetrain, as it sounds really good with that stuff in the system.
On my drive home today around 2500-3000 rpm I am getting real bad lifter ticking noise. When I let of the gas it stops but as soon as I get back on it it will start ticking again. I just bought oil for an oil change Mobile 1
0W-40 I'm pretty sure plus a mobile 1 filter. Will this stop the ticking noise or do I need to adjust my lifters?
I recently found out when I open the door to my mk4 jetta it starts to make this loud ticking noise. It happen when I open only three doors the two front and the rear passenger. I have no clue what it is i even asked my mechanic who has been working on volkswagens for years and he said hes never heard anything like it.
View 1 RepliesI have a 2005 mk4 Gli 1.8T with 69,000 miles. This ticking sound that I hear from the inside of my car is coming from the right side of the engine bay. It starts during idle. It starts ticking and gets a little faster and then stops for a few seconds then begins again. It fully stops while driving. I changed tensioner, belt, serpentine belt, water pump, and oil change with mobile 1 synthetic 0w-40.
View 6 Replies