Golf IV R32 :: Water Pump Seized, Shredded The Serpentine Belt
Jan 20, 2015
So, I somehow ended up with a hole in my oil pan. Long story short: water pump seized which shredded the serpentine belt. Had the car towed to the dealer. They found the hole in the oil pan. Pretty sure it wasn't there prior to the tow, and unfortunately I didn't watch the driver unload the car when we got there. Both tow company and dealer have just shrugged their shoulders on it.
I let the dealer replace the water pump because it's not something I was interested in tackling with everything that needs to be moved out of the way to get to it. However, I towed the car home myself (flatbed carrier from U-haul) to do the oil pan. I just got
View 4 Replies
Advertisement
So I was getting my car flashed to stage 1 at a dealership here in the Chicago suburbs and there was CSG R in there with the timing belt shredded. Turns out water pump came apart, shreded the timing belt, and apparently the pistons smashed the valves. I got a call from my friend whos a mechanic and said another one is getting towed there today with the same issue. Both have between 2k and 3k miles on them.
View 24 Replies
I was driving my 2005 RX 330 (138k miles) North on I-75 through Atlanta in rush hour traffic when the car completely died in the left hand lane w/ no shoulder. GDOT stopped six lanes of traffic to push us up and over a couple of hundred yards to a right shoulder. It was determined that due to a coolant leak from the water pump the timing belt malfunctioned and shredded.
I had heard that the water pump should be replaced during the 90k maintenance when the timing belt is changed, but my water pump was not replaced according to my maintenance records. I understand from reading a couple of posts that this isn't always required but that they do check the water pump. Is this correct? And if so should they have noticed that there was a potential problem?
View 9 Replies
I was driving the other day (cold weather- approx 15 F), and my serpentine belt shredded. Managed to drive a mile or so to my driveway. The belt was shredded on the fan side (and had come completely off), but it wasn't torn in two. Got a new belt and installed it, but upon test-cranking, found that it was riding up one ridge on the crank. All the other ribbed pulleys were fine (PS, AC). The smooth pulleys had the belt move a little, however.
Thinking I didn't set it right, I reinstalled the belt on the crank and tried again. Same result (belt rides up one groove, towards the fan). I perused the archives, and one comment was that someone simply trimmed one groove off the belt and everything was happy. The belt found it's "groove", and didn't act up anymore. Doesn't fix the underlying problem, but
1) is this a good fix
2) any clue what is going on?
3) Do I need to get the crank fixed?
BTW, I am sure that I threaded the belt on correctly!
1992 Aerostar, 4.0L, AWD. AC+P/S....
View 9 Replies
Is it possible to change the water pump and serpentine belt in a 2006 Toyota Camry with 4 cyl. engine in less than an hour?
View 4 Replies
After finally identifying a bad serpentine belt tensioner for being the the culprit for my engine noises, my mechanic said that the 'thru-bolt' is siezed. Since the replacement job was at my budget limit he said he doesnt want to get into it in fear that he has to brake the bolt and drill it out (requiring 2-3x more labor cost according to him).
If this is the case, and the 'thru-bolt' is seized, is this in any way something I can make a an effort to tackle? I have a jack and jack stands, and plenty of time.
View 3 Replies
So I have a 2002 GTI VR6 with the 24v BDF Engine. I have been having a problem with my belt squealing. It started after I replaced my water pump and crack pipe. While I was at it I replaced the belt tensioner and belt with a kit from ECS than had an aftermarket tensioner and a Conti drive belt(has 6 ribs). When starting the car up for the first time after doing the water pump I noticed the belt was squealing. It would only squeal when I gave it some good throttle.
After a few minutes it stopped squealing so I figured it was some coolant or something on the belt. Well its been a few weeks and it continues to squeal when I give it throttle, but only if the ac is on and it will only do it for a few minutes. After a few minutes of the car running or driving down the road it doesn't squeal anymore. I did make a long drive in the rain very shortly after replacing the belt and it was a really heavy rain storm. There was a lot of water on the road and my belt was squealing pretty much the whole drive if I had the ac on. I had to alternate ac on and off so I could keep the windows defogged.
After that experience I put on a set of engine splash guards from ECS. (note these guards were the ECS branded ones and were a terrible fit. Holes didn't line up with studs on bottom of frame and ended up taking the middle belly pan section out as it would hang down way too low even with the side covers connected to it.) That seemed to keep it from squealing while driving in the rain but it still squeals after first starting the cold engine with ac on.
View 10 Replies
My ball bearing on the tensioner seized and broke the belt. Does that happen all the time?? My car is a CP and right now it's only 36k miles..
View 24 Replies
So the PO of my Jetta had the alternator replaced...awesome! One less job for me to do. My serpentine belt went out yesterday so I chalked it up to being old. When I got the new belt on it kept slipping off, I pulled the tensioner pulley off and saw that the wheel was all chewed up, I look down and saw that whoever put in the alternator didn't bother to screw in the bolt all the way and it chewed up the belt and everything else.
View 1 Replies
So this car has only 50k miles. It was really cold in the sierra (around 20F) and the car started making a squeaking sound. I assumed it was just belt warming up, but when I opened the hood later, I saw shredded plastic. No CEL's! Seems to run smooth.
Where this came from? Is it part of the serpentine belt system?
View 20 Replies
I have an 03 vr and my serpentine belt squeals when I first start the car up and after it warms up it will go away at idle but starts to squeal again when i accelerate. I can not seem to find what is causing this. After I start it and sprites a little water on it near the power steering pulley the squeal will disappear then come right back. I've tried new belt new tensioner and new power steering pulley. What else I could try or look for...
View 1 Replies
So after saying "We don't work on that model" when I asked for a timing belt / water pump change (yup, they actually said that), I went in today to try and get a second key made since the guy I bought the Phaeton from only had 1. I do not have the little code. I was told that there was nothing they could do without the code. My only hope would be to contact EVE directly.
View 2 Replies
I am having a really tough month with finances, and life in general... and now my car's engine has died on me. I drive a Mazda Protege 2000 ES with 197,000 miles on it.
The problem started with the water pump failing; I decided not to drive the car that much, if at all until I could get it fixed. I always kept an eye for the water and the temp gauge, and I thought it could last a couple of short trips at least. Well today was my appointment with the mechanic, and the belt broke off... The water pump went all lose, and I suddenly felt the steering was starting to fail too. So I decided to pull over... before even reaching the side of the road, the battery indicator was lit, then all the other lights came in, and fumes were coming out from the front.
In the shop my mechanic tried starting the car and said that the compression was lost and that the engine was dead. I actually don't want to see the car go... And everyone think it is stupid, but what I am thinking is... All I can afford right now is another $2000 car, which will mean that I might need to fix a bunch of stuff again anyways. So why not just replace the engine? The engine is what basically makes a car... a car. The rest of the car seems fine, and I never thought it would die all suddenly .
View 19 Replies
A noise has been coming from my Serp belt for awhile. My serpentine belt doesn't have any wear. At least It doesn't look like it. Will this noise go away by replacing it? or is it something else? Is it the tensioner? I've noticed when car warms up the noise goes away. I do not know the last time it was replaced.
Here is a video : [URL] .....
Car - 2001 Jetta TDI with 230k miles.
View 5 Replies
So my mk6 developed what initially sounded initially like a bad serpentine belt tensioner. Only under anything more than load, and sounded like a bird chattering under the hood. Got outside today, fired car up, watched tensioner and it sat there steady as a rail. The noise is coming from the opposite side of the engine. Not really mechanical/metallic at all and tracks under load with the RPMs. Why i initially thought what i did. Not I'm sort of baffled.
View 3 Replies
There has been a noise coming from the serpentine belt area for some times now, and I thought when I get to work on the belt I will get it fixed.
Last night, I replaced the alternator with a brand new one from idpart with a clutch pulley (the original pulley was plastic). I also replaced the tensioner and serpentine belt with this kit from ECS: [URL] .....
Everything was put back tight and nicely. Turned on the engine: the noise is still there.
For sure there is one pulley on its way out, but with one?
Video here: [URL] .....
Noticeable @ 0:47
It's a 2.0 AVH Jetta.
View 3 Replies
So, when I was leaving work I started my car up and heard what sounds like a low grinding noise coming from the area where the serpentine belt is. Let the car idle and it remained.
Put the car in gear and drove off and the sound was still there. the sound gets louder as I increase my speed. It went away a couple of times when I was braking, then came back.
I stopped at the gas station and could still hear it. After getting gas, fired the car back up and heard nothing. When I drove off, the sound returned.
I got home and put it in park, leaving the car on, opened the hood and could still hear the noise. Pressed and held the gas a few times and the sound did get louder.
I am pretty sure it is coming from some rotating part, but no clue what part. What this could be?
recap:
-get noise on startup
-while driving noise gets louder
-sometimes it stops when braking
-sound coming from area of serpentine belt
View 7 Replies
How to change the timing belt and water pump on a 2006 2.0t passat?
View 3 Replies
I replaced a timing belt and related parts on a v 6 atq motor and three weeks later there's a pretty good oil leak, where its from or if oil leak can be related to timing belt replacement... leak seems to be in same area as crank pulley but not sure...
View 2 Replies
Toyota dealer said computer indicated the water pump and belt needed replacing. We decided to do the replacement ourself. Now the light comes on which indicates car is running hot. We did replace the coolant. The 2005 Toyota Prius never ran hot before the replacement, What did we do wrong?
View 3 Replies
1987 Acura Integra AT with 158k... Water pump broke after 75k miles (in 18yr period)....
I am wondering what else should I have it done:
- thermostat
- oxygen sensor (is there one?)
- vacuum tubes (I hear that these fail due to age)
- anything else?
Are these near where they will be working on? Any other tips?
View 6 Replies
