I'm looking at an R32 with 58k miles. When I turn the wheel side to side when the car is stopped, I hear a creak from the suspension. What is making the noise and how expensive is it to fix?
View 3 RepliesRecently on my gen 6 with about 68k miles I have noticed a very pronounce noise when turning the steering wheel whether the car is stationary or in motion. It makes a loud creaking/popping noise and it cant be heard from outside the car. The noise happens no matter which way I turn the steering wheel. I know Toyota has had problems with their intermediate steering shafts.
View 5 RepliesI've always had a small creaking or groan when i turn the wheel after I lowered my GLI a year ago, but i feel like it's getting louder...
What could be causing it? cause im doing my year end "maintenance" (if its worn/almost broke, perfect excuse to buy upgrades) ...
My control arms are brand new with r32 bushings as are my 034strut mounts/bearings. I checked my steering fluid level and its good.
Pic for reference of current height, might raise it .5 or so, my new job has quite the driveway entrance.
I hear a noise when I turn my steering wheel. It happens when I am stopped or rolling. It sounds like a giant, stretching rubber band. Or maybe someone rubbing two balloons together. What it might be?
View 4 Replies105K miles, developing a groaning noise when turning steering wheel during low speeds and stopped. Can feel slightly through steering column. No other problems, no clunking or any grinding noises, just "groaning" sound on initial movement. Fluid is full. While searching fix, I found this article on the C70 model, sounds like I might have same thing on my XC90. [URL] ....
View 6 RepliesSteering wheel that squeaks or creaks when you turn it? It's not very loud but getting annoying...
View 2 RepliesA few days ago my car started making a groaning noise when I turn the steering wheel. Sounds like it's coming from the middle of the car. Makes the noise whether the car is moving or not.
View 12 RepliesJust on my way home during the last few turns down the underground parking, I found the steering wheel column making some squeak noise. Is there anything I should check before bringing it back to the dealership?
View 6 RepliesI know this can bring many speculations. I've recently install new 034 strut mounts and new bearings. Stiffer mounts and the new bearings took care of the "compression" noise going over bumps. The bearings were shot.
Just returned from a trip, driving the R now I've notice a slight creaking noise while making left or right full turns at slow speed. I haven't noticed it at high speed yet or maybe its because our cars are pretty loud with an aftermarket exhaust but i don't suspect there's noise going straight.
I tried to see if there's anything out of the ordinary. I noticed that the driver side spring moves slight while the steering wheel is turned either left or right. I suspect that this slight movement is causing the spring to rub on a rubber component of the wheel bearing thus causing the noise.
I just had an alignment done and the steering wheel is turned counter clockwise a little. I know very little about alignment. I know the terminology and what it means and i heard the the rear camber and toe isn't adjustable on mk4s. I did lower my car,only about one inch though.
Here is the sheet that came with the alignment:
So when turning my steering wheel i get this croaking noise. At stand still and while driving. Its annoying the heck out of me. You can hear it in the car and outside. What it could be? Power steering fluid level is normal.
View 11 RepliesFront sway bar bushings causing "clicking" noise while turning the steering wheel? Usually happens when I'm moving into or out of a parking spot and while I'm turning my steering wheel. I got the driver side, I believe, lower control arm replaced and after that i started getting a faint clicking noise when I'm turning the steering wheel.
The dealer, after multiple visits, discovered it's the front sway bar bushing causing the noise. They said it's really not worth the cost, since it's isn't a safety issue and the whole sway bar needs to be replace since you can't buy bushings alone. I want to get rid of the noise regardless of safety or not.
So for about two years now I have had this creaking, squeaking noise coming from the left side of the truck. It only happens when turning left(such as 90° turns). It doesn't happen over bumps or while turning right. if you turn slowly the sound is minimal or not there. When it rains and there is water on the road the noise usually stops all together. The noise is not constant. Almost sounds like a shopping cart with bad wheel.
We replaced all the ball joints, tie rod ends, shocks, sway bar links, tires, sway bar bushings, and brakes(not all because of the sound, just taking care of maintenance along the way). My mechanic did my alignment about two months ago and could not pin the noise down and didn't see anything binding. Suggested to change out the sway bar links, but that didn't stop it.
Having a problem with the steering wheel squeaking while you turn the wheel? It sounds like its rubbing against something. Any TSB on it...
View 3 RepliesThe controls on my steering wheel stopped working. Last Saturday I brought car into dealer for an oil change and they did a recall on the ECM module. I wonder if this is a coincidence or if the programming messed up the wheel.
View 2 RepliesGetting a slight clicking sound/feel when turning the steering wheel when either stopped or moving very slowly. It's most noticeable when turning in and out of a parking space. Don't think it's subframe but may the strut bearing caps.
View 16 RepliesI have a 2008 Accent with 136,000 km on it. A few days ago I parked with the wheels slightly turned and the steering wheel totally locked, the key couldn't turn and the wheel couldn't be unlocked by pushing it either way. I called CAA and the driver had no luck but he tapped the key lightly with a wrench while it was in the ignition and it started. I took it to the mechanic yesterday and they had the same problems and called a locksmith who specializes in automotive locks.
They told me to take it to the dealership because they thought it was something further inside. Something was bugging me and I realized what it was. When the car was parked and the key wasn't in the ignition, as soon as I opened the driver side door the chimes went off. I closed the door, tried to lock it from outside with the remote but it wouldn't lock and the alarm wouldn't engage. I called my mechanic to tell him this and we all agreed that it seemed the car thought the key was in the ignition even though it wasn't.
I went to the dealership and left it and they called and said it was the ignition cylinder that needed replacing. Does this sound right?
I am getting a click from the steering when rocking the wheel left or right. It is coming from the assembly the intermediate shaft is connected to. I see there is a large bearing on the end where the shaft comes out. I am not sure what this assembly is called. I have had it at the dealer and they said they re-torqued everything but they could not duplicate it.
I do not fall in the range for the recall and I have no problem with the car pulling left so I do not think it has anything to do with the intermediate shaft. It is clearly from the assembly the intermediate shaft is connected to on the steering wheel end of the intermediate shaft. 2011 limited
My Phaeton has pretty audible whine when turning the steering wheel. Closer to lock- the louder the noise. Can I check the fluid myself or is this going to become a trip to the dealer?
View 5 RepliesI bought an 09 Accent and love the car, good mileage and actually quiet. I have developed a noise when I turn my steering wheel. It is not there when the car is cold, but after a few moments, when I turn a corner, I hear sort of rubber on rubber sound as I turn the steering wheel.
View 2 RepliesWhen turning the steering wheel slowly while from a stop or slow speed there is a grinding sound coming from the front end. It isn't very loud but you can also feel it in the steering wheel.
Is there a common thing/problem with these? I know there isn't a pump. There isn't any kind of a vibration or wobble at highway speed.