Also looked through our manuals and saw jack. Looked at the inside of the rear hatch and saw no easy way of replacing the rear tail light bulbs. I'm guessing that i would have to take out the plastic and/or carpet to get to it?
View 6 RepliesWas looking to change them out. But can't find anything on how hard/easy this is to do.
View 4 RepliesWhat are the steps involved in replacing my fog light bulbs? One burned out. And what's the correct bulb replacement number?
View 5 RepliesHow to replace the fog light bulbs on a 2015 IS250? Or is it even possible? I called the dealership, and they didn't know the bulb size. In fact, he said they were LED bulbs. Is there a DIY for replacing the fog lights?
View 7 RepliesHeadlight bulbs. So I am looking to replace my bulbs because mine don't seem to have that great of light output. I am not sure if it is the actual headlight or if it is just the bulbs? Is it possible to just replace the bulbs and get better light output? I am not sure of the brand of headlights I have but I am pretty sure they are some cheap aftermarket ebay headlights. I want to replace the headlights in the future but for now I was wondering if I can get away with just replacing the bulbs. When selecting the bulbs, are they all pretty much universal or do I have to buy specifically for the type of headlights I have?
View 10 Replies2005 Escalade-rear tail lights-water in tail assembly. Bulbs blew. Replaced bulbs. Will not come on when I turn on headlights. They do come on when you depress the brakes and when you use the hazards or signals.
View 2 RepliesI need detailed instructions for how to replace the right (passenger's side) rear turn signal bulb socket and the subassembly that holds the remaining bulbs and inserts into the tail light assembly. I've done this once before successfully but now can't seem to make it work now.
Without the subassembly inserted and locked into place with its locking tabs, the turn signal bulb locks into place in its socket, and that socket in turn easily inserts and locks into place in the hole in the outboard corner of the lens through the rear of the lens assembly. However, I can't seem to install both the turn signal bulb in its socket and the subassembly that holds the rest of the bulbs. The two contacts on the underside of the rim of the turn signal bulb socket would indicate that that the socket installs after the subassembly, but then it has nothing to plug into. When it's installed first, I don't see how the bulb would be energized.
The owner's manual of course says to have the dealer handle maintenance in this area.
I need to replace one of the tailights on my wife's '06 RX330. It's one of the inboard tailights that, along with a backup light, is contained in a module in the rear liftgate.
How to remove the module for access to the lights? I see a screw/nut that apparently must be removed first, but after removing it, I couldn't tell whether module pulled straight out (or forward when the liftgate is closed), if it pulled to the side of the car, or if there's another fastener I missed. I don't want to pull the wrong way and break something......
How to replace one of the xenon bulbs.
I know the type of lamp to be used: D1S 12V35W.
I looking for a exploded view/instructions how to extract the front lamp units in order to replace the bulbs.
How do you remove the Touareg Headlights to replace the light bulbs. I have fount the open close turn, but that doesn't release them all the way.
View 3 RepliesI'm trying to change my license plate bulbs to LED but cant figure out how get to the bulb. I've already removed the carpeted cover but cant seem to figure out how to get the bulb out..... 2007 ES350....
View 3 RepliesI have read several threads about replacing them with LED's (which is what I am doing), but I cannot figure out how to get that plastic cover out!
I don't want to just start jamming the screwdriver in randomly, as I will probably crack something.
how to replace the bulbs in a 2010-2013 Toyota Corolla I am finding older Corollas but not 2013. I did tear apart the dash but it look like they are now a self contained unit.
View 3 RepliesHow to change the HID light bulbs? Looking for links with photos.
View 5 RepliesWant to replace my park light bulbs (the wedge bulbs housed in the high beam lens) with leds but unsure how to get these things out? They have a black plastic tab on the back of the bulb fitting which I assume is to aid removal but do you need to twist then pull or just pull straight out? They look rather flimsy so don't want risk breakage ...
View 8 RepliesLast night I broke the tail light at the grocery store... I came out and there was a line of carts behind my car that a parking lot attendant was collecting. I added my cart to the end and went to shove them all out of the way, and he yells to me, "I got it! I got it!" so I leave them, get into my car, see him go past with a bunch of carts & back up. What this will run? Can I just replace the lens or do I have to replace the whole assembly? And is this something I can easily enough swap out myself?
View 2 RepliesI took my car into the dealer and got the mech unit replaced. I drove it home in the rain and when I parked it I noticed bad condensation in the driver side tail light.I have never noticed this before and do not no if it was there when I bought it. Anyways, I did some research about the issue and I found that it is a common problem. I have read that it is normal because it is vented and others say take it to the dealer and get it fixed?
View 23 RepliesI installed LED R tail lights from ECS and now when I put the car in reverse with the lights on the right inner tail light goes out. It's not the light because I already swapped it for another one and it did the same thing. I do have a RVC and the trigger wire is hooked up to this light but the stock lights work fine and I still have the issue when I unhook the RVC.
View 12 RepliesPicked up the r32 last July and the car has been running great. No problems and still a blast to drive. My right tail light, however, will not work when I put my lights on. The signal works, brakes work, the flashing lights when I lock the car are fine, but my right signal tail light stays out. Thought it just might be the bulb at first, switched it but it didn't make a difference.
Went to the dealer for an oil change and mentioned the problem saying maybe I shorted a fuse or something and I can just replace it. He told me it was a little deeper than than that and need to check it out first.
I just notice some condensation in one of my tailights.
There's been some snow and ice lately and I'm wondering if that's what caused it.
Is there anyway I can get rid of it? Is it from the water getting through the gaskets/seals?
Any link to a non-led tail light removal diy? I tried searching, didn't get any results. Any write up or diy on it?
[URL].....