Passat (B5) :: 2003 V6 Getting PO118 Code
Jun 1, 2008
My friends sisters 2003 V6 is getting a po118 code. And how do I fix it?
View 1 Replies
Jun 1, 2008
Advertisement
Passat (B6) :: Fault Code PO118 / Radiator Fan Starts Running Within A Few Seconds Of Start Up
I have an 05, 2.0 TDI which recently got a a PO118 fault. My mechanic replaced the green top sensor with one with a blue top (having been told that the green top sensors have been updated to blue). I am still getting an occasional PO118 fault but now the auxiliary (a/c) fan or the radiator starts running within a few seconds of start up, A/C on or not. SO, bad sensor, wrong sensor or something else entirely?
View 2 RepliesPassat (B5) :: 2003 - Where To Find Paint Color Code
I bought some touch up at the dealer and it is not the right shade of gray.
Where can I find the paint code on the car?
I have a gray metallic 2003 wagon.
Passat - Volkswagen :: 2003 - Fixing Code P3081 / AC Not Working
I own a 2003 Volkswagen Passat Wagon 2.8L SFI DOHC 6cyl. I have a code P3081 I have replaced the temp sensor and the reserve coolant tank I am going for the thermostat next. I cannot get rid of this code. Also since the code started when my wife drives short distances and turns off the car it won't start again for about 15 min unless it is jumped started. To top it all off she came home yesterday and said she turned on the a/c and it worked for about 10 min and then made a lot of noise and quit working.
View 2 RepliesPassat (B5) :: 2003 - Bucking And Lurching Throwing A P0301 (Cyl 1 Misfire) Code
My wife's 03 Passat w/ 1.8t is bucking and lurching throwing a P0301 (Cyl 1 misfire) code. We have about 58k on the engine and had the dealer do the 40k service 2 years ago.
So far I replaced cyl 1 spark plug, swapped and then replace coil pack with new. My choices for parts were limited on a Friday night and these are el cheapo Autozone parts. Still missing and throwing DTC, I don't really have access to Vag-Com anymore (just OBD reader at parts store) and I don't have a Bentley's either (I know there's some eye rolling going on now).
How to troubleshoot the cause so I can make a decision to take to mechanic or do a few more parts swaps between now and Monday. I've got tools and a multi-meter. I used to have Vag-Com but it isn't supported on my new laptop (Vista), I tried the USB extension cord on my desktop but it is hit and miss.
Passat - Volkswagen :: 2003 - Check Engine Light Is On / Code Is P0778
We have a 2003 VW Passat 1.8, front wheel drive. The check engine light is on. The code is p0778. When we start the car the gears light display lights up in red for all gears . We put the car in reverse, back out the garage and when we stop, we get a bump. And we shift to drive the car moves slowly with some hesitation.
Sometimes after the car runs for 10 minutes, then turned of for a few second then started up again, the problem goes away. Before this problem started, we would start the car in the mornings, and put in "R" , and only the reverse gear would light up. (which is the way it is suppose to work).
Ford F-150 - 1997-2003 :: 2003 - Got Code U1262 - Random Misfire?
I have a 03 F150 with a bi-fuel 5.4 engine an it has 195000 miles. I have had trouble for some time now with misfires. I bought the truck in october of 2011 with 125000 miles and replaced all the coils and spark plugs because it was misfiring badly will running on CNG. It was fine on gasoline and never had any codes. After I replaced the plugs and coils it ran fine on CNG and gasoline.
This summer 2013 it began missing badly at highway speeds only when running on CNG. If I accelerated the miss would go away until I was light on the throttle again.I checked the misfire count and found the bad cylinder and replaced a coil. Then a day later same thing on another cylinder. I swapped a coil from another cylinder and problem went away for a day. Eventually I chased the misfire around all the cylinders on the engine until I had ended up either replacing a spark plug or swapping a coil on all the cylinders. And I still had a misfire. It seemed to be worse on days with temperatures above 90 degrees. Eventually I got it to stop misfiring.
So now 5 months later I am back again with a misfire. This time it is misfiring on both gasoline and CNG and under any throttle conditions, except coasting. I have no codes. And the misfire monitor is sending me around the engine again. I have replaced a spark plug in two cylinders and swapped 4 coils.
I'm ready to buy all new coils, but I want to be sure that it is not a waste of money since the old ones only have 70000 miles on them.
Two days ago I had the misfire monitor saying #4 in the evening and the next day without me having done any work on it it was saying #6. Later that same day it said #7 and I still hadn't done anything other than drive the truck.
I checked the connections at the firewall on the drivers side with the three large plugs that are held in with a 10mm bolt, they looked fine, no corrosion or burnt pins. I checked the connection at the ACFM which also looks good. I will check the connection at the PCM in the next day or so.
Some other problems that may be contributing:
1. I occasionally get a U1262 code (scp fault)
2. Sometimes when I check the misfire monitor it only shows 7 cylinders, sometime 9 cylinders. I am using an Innova 3160 scanner.
3. I have either a leaking valve cover gasket or leaking head gasket, because I have oil dripping from the rear bottom corner of the passenger side cylinder head right above the exhaust pipe.
Passat (B6) :: What Does The Code P2243 Mean
Well this car is getting ridiculous. i just got it back from the dealership 3 weeks ago from having them fix the car when the check engine light came on because some pressure valve that is supposedly in each cylinder or something was bad.
Well now, its on again. I took it to autozone but when the guy put his scanner on there, nothing came up. So when I started the car as the scanner was plugged in, he said it gave him the code P2243. He did not know what the code was. The engine light is now off and the guy did not clear the code. The car still rides normal.
Passat (B6) :: 2.0T - MIL With Code P0441
My 2.0t threw a MIL with code P0441 about 24 hours after having the timing and all replaced. I replaced the N80 valve last week, but this did not make the light turn off.
I also have a hard time starting after filling up. What this might be?
Passat (B5) :: CEL On / Gas Cap Code Keeps Coming Up
Dealer says the "gas cap" code keeps coming up. Won't share the number with me.... I've tried two new OEM gas caps, fuel & air filter replacement. I keep paying to get it reset. It keeps coming back on. Clueless VW mechanics... What else it might be?
View 3 RepliesPassat (B6) :: HID Pointing Too Low - Getting Code For ABS
I have finally installed HID, but I tend to think they pointed too low, or it is just my imagination. Need to change the level after installing HID? Second and most important Question, the thing is that after removing the + from Battery, I have reset the settings now car shows trouble codes for g85 I guess the steering column. That it is not calibrated right, the code applies for ABS and 44-Steering Assist, I might have messed up the options, but I strongly believe it might be fixed without dealership. When the car starts it shows, ESP off and steering column yellow all the time.
View 6 RepliesPassat (B6) :: 2006 - Got 7e8 And 7e9 Code - CEL Came On?
What is a 7e8 and 7e9 code on a 06 passat 2.0t?? Check engine just came on..scanned it and got those.. I am lost.. What it means?
View 12 RepliesPassat (B5) :: CEL Is On - Code P0299
The 1.8 passat turbo has 60k miles on it.
CEL is on, shop says it is code P0299 (I have read this code being called the "underboost" code). Local shop also wanted $1500++ to put on a new turbo. Car is driving and responding just fine.
I have searched high and low and can't find definitive answers to these questions.
I have read some posts indicating that replacing the Waste Gate Valve has improved performance and turned off the CEL. Can you replace this valve on the 1.8 without replacing the whole turbo?
Where is this valve in the engine compartment? Can I just clean it? CEL code 0299, car behaving normally, shop telling you that your need to replace the turbo?
Passat (B5) :: Car Has Misfire And Code On The Cylinder
I am having a misfire code on the #1 cylinder. Its not bad but I really want to nip it in the butt before it goes out completely. I was told to try and get some of the older style coilpacks that bolt on and go with them. Can I put them on my 03 passat 1.8t.
View 2 RepliesPassat (B5) :: P0420 Malfunction Code
While on business travel, my wife's 2003 1.8T Passat wagon had the MIL illuminate. I had her pull the OBD2 code while I was away, and it came up with P0420. I have been reading up on it, but I have found much in the way of troubleshooting this code. I don't want to just start randomly replacing parts until the light goes away. When I get back I am going to look for exhaust leaks, but barring those what else can be looked for.
View 5 RepliesPassat (B6) :: 2008 2.0T CEL With Code P0171
Car was purchased new and has been great (O2 sensor was replaced a few years ago and something to do with breather valves due to it making a high pitched scream when the turbo wasn't trying to kick in) for the past 80K miles. Got a Check Engine Light yesterday and took it to Autozone to have them pull the codes (I was really hoping it was the "Hey idiot, time for your 80k maintenance") and they found a P0170 Bank 1 Cylinder 1 Too Lean (by their version of reading it at least). Probable causes: MAF, Vacuum or O2 Sensor.
Nothing that seems immediately life threatening so off to work in the morning. I noticed that it was running a little rough at idle and at speed when coming off the gas. Plus it did the old 2 or 3 extra turns after shutting it off.
The Probable causes line up with what I'm reading so I'm planning to pull and clean the MAF sensor when I get home tonight. Next up is probably replacing O2 sensors from what I gather. Although If i have time tonight I may pull the airbox(?)/Engine cover off and eyeball every hose I can lay eyes on as well as the Air Filter, etc.
What am I missing? Does the rough running and running a second or 2 after shutting it off add anything to the potential diagnosis?
Passat (B5) :: What Code P0492 Means
My friend has a b5.5 passat and he's getting this code; p0492... what that means? or what might be causing that code to come up?
View 13 RepliesPassat (B5) :: CEL And Error Code P1476
I have this error code on my VW 1999 passat 1.8T automatic car. How to resolve it. My friend reset it and CEL went off for few days and now it came back again. How to resolve it??
View 2 RepliesPassat (B6) :: Will A Bad DV Valve Always Throw A Code?
Just wondering if I will know via a check engine light if when my Diverter valve may act up. I don't really want to add a boost gauge if I can let the onboard diagnostics do the work for me. So if I loose boost will I know?
View 8 RepliesPassat (B5) :: V6 CEL Steady On / Code P0118
2001 Passat 4motion V6. Engine check light on steady, OBDII says P0118, which should be Engine Coolant Temperature Circuit High Input . What does that mean? Everything else seems normal on the car. Coolant temperature seems to warm up and stays normal. If someone says coolant temperature sensor, can I get a diagram showing where it is in the engine compartment?
View 1 RepliesPassat (B5) :: Getting Error Code 0012?
It happened to passat. Once I hit about 75mph on highway I get a stop engine (oil presser low light). It flashes than goes off once I lower my speed. I checked all fluids are normal. It throws a 12 code an says oil passage blocked, cam positioning sensor, skipped timing chain. These are what the code says could be wrong with it. The car runs fine with no hesitation at idle or normal city driving. I have already flushed the oil with cleaner, and still getting the light.
View 5 Replies