So today I went to work forgot my lights on and when i got done working my car battery was dead. I jump started the car and now the windows dont roll up with one click and when I lock car doors only driver door locks how could i fix this problem do I need to reprogram ?
View 5 Replies2000 Passat 1.8t 5Speed... Drove to school today, Parked, the windows wouldn't roll down, the locks weren't working, the trunk wouldn't open so i tried starting it. The car wouldn't start. Charged the battery. Still nothing. Tried jumping it, Nothing. So i had to push start it and it ran but nothing still worked.
Drove it home. and it wont start still. I looked it up and some one said they had the same problem, and it was the CCM (comfort control module)? Is this what it sounds like. No dash lights or lcd warning came up. fuses are fine. radio worked. headlights. dash worked. nothing else though.
I thought my t-reg had this feature. Where you put key in the drivers door and it will roll up or down the windows in the order of which they were last used.
Same thing with sunroof. I vaguely remember using this... but it's not working.
I've been searching for a couple days and haven't really found any good info on this... Is ot possible to make our rear windows roll all the way down?
View 1 RepliesI have a 2004 Hyundai Santa Fe. The driver window controls will not roll down the back windows, but it will close them. What is the issue, I am thinking a broken switch.
View 4 RepliesMy newly purchased 1999 b5 passat wont lock/unlock with the key. The key does nothing and i dont have the flip key, i want to get a new flip key from the dealer but i am unsure if they can code it to my car if the lock dosent work i took the door panel off but didnt want to take off the inner metal skin to figure it out.
View 9 RepliesI just recently replaced the driver side 4-button window switch with one from AARodriguez (FixmyVW.com) on my 2001 MKIV Golf. The new switch had been working fine, but over the last few months, the back windows intermittently wouldn't roll down. It was a gradual process that started when I realized that the windows would actually start to roll back DOWN when I was rolling them UP, or was it vice versa... regardless, it was backwards, and I would have to do it a few times to get it to work properly.
Now, the windows won't roll down at all using the driver's switch, but I do hear a click in the back doors as though some connection is being made. The windows just won't budge. The switches on the back doors work flawlessly, so I don't think it's the motors. The switches for the front windows on the new 4-button switch work fine. There's always a possibility I got a bum switch, or that this one went out, I suppose.
The driver side lock has jammed on my 2008 Mercury Milan Premier. Now I have to open my door by rolling down my window to get to the outside latch!
View 8 RepliesCan program the windows to roll down and up with the key fob?
View 9 Repliesit's been a long time since i had to do this and i forget. What's the number added to the convenience module to roll windows down or up with remote? 2000 passat wagon
View 10 RepliesPassengers windows won't roll down from driver side master controls. If I go on singulars doors all windows roll down/up perfectly. From master control drivers position I can only roll down/up my window.
I have already reset all windows... sun roof too. Tried to disconnect battery 10 minutes and then reset all windows another time.
If I use the command key for roll down/up all windows together the car roll down/up only drivers window and sun roof.
I have a 2004 lexus rx 300.
I just bought a 2008 Passat last week, and am still learning all the features in the car. I previously had an '05 Jetta, and I was able to remotely open all of the windows by holding the key in the unlock position.
My manual says that I can roll down all of the windows from the remote by holding the unlock key on the remote, but it doesn't work. I have even checked the settings to make sure that the "Convenience" option is set to "All" windows. Am I missing something? What do I have to do to get the windows opened / closed remotely?
My 99 passat has this very annoying habit of rolling down all the windows and unlocking the doors some random amount of time after I lock the car. Could it be a bad ECU under the driver's seat? I'm ready to push the car off a cliff!
View 3 RepliesI also have a 2000 boneville and over the winter i discovered that those same three windows/locks/courtesy lamps doesn't work , I have went through all the fuses which are fine , I will call the dealership and check on the BCM. I also have the wet floor problem. But no sun roof, I read that it may be the connector under the pass seat, I see a connector above the carpet, could that be it or is it located under the carpet...
View 8 RepliesI have a 2000 Taurus and recently the power windows and power locks stopped working. They won't work from any door switch but when I use the key fob to unlock or lock the car the locks will work. However, the windows won't work from any door switch. I didn't see a fuse marked for the windows or locks.
View 3 RepliesI have a 2003 jetta GLI (vr6 6 speed) that i received from a friend because of some body damage to the doors mainly. so i replaced the doors with some from a 2001 jetta glx, but the power windows don't work with the switches inside the car. However, when I put the key in the door and turn it, all of the windows will go up and down...(So the motors are good and they are getting power) the door locks, gas cap lid, trunk, sunroof all work and the interior lights work as well.
So i researched it and everyone said fuse #14 or ccm... so i replaced the fuse.... multiple times now just to make sure... After that didn't work, i bought a new ccm with the same part #. that didn't work at all... still same problems... I was wondering if maybe the new doors are or aren't CAN-BUS? if that even matters?
I've searched the inter tubes, trying to find out if there is a fuse or relay or even circuit breaker that needs replacing. From all I've checked, I can't find a fuse, relay or circuit breaker labeled to control window and door locks.all 4 windows don't work (with exception to front passenger window occasionally goes down but not up.)finally figured i should have come to this fine forum first! (especially after hearing 'car talk' today)some other pages with similar questions had answers referring to fuse #12 or relay F (mine aren't identified that way). I'm heading out to get a test light -- just so i can see if i can test anything...
View 13 Replies2003 f-150 Supercrew 4x4 ... I have no power to my windows door locks, power seat, mirrors a/c, anything is the a module that controls all of that stuff? Where is it?
View 2 RepliesI've got a 2002 jetta. new ecu, new cluster, new keys (new to me from a 2010 beetle) all installed but my windows, door illumination, locks and electric mirrors dont work. Windows will go up and down with key in door, and locks work that way as well. if i put my old cluster back, everything works fine.
View 3 RepliesWe've got a 2006 Civic EX Coupe, and the power windows and power door locks have both stopped working. If I can remember correctly, they kind of faded out over the course of a few weeks, working intermittently then not working at all.
All window and door lock fuses (interior and under the hood) are still good.
What this could be? Is it something DIY fixable? I've removed door panels for random stuff, but haven't really done much with power window electronics.
1997 Ford Expedition 4x4
When I push the switch for the drivers window I can hear the relay in the fuse block make a click but window doesn't move. If I push the switch for any other window (on the drivers door or any other door) no click at the relay and no window movement. I've swapped the relay with other relays in the fuse block but nothing changed.
I've tested the driver side window motor by running 12 volts directly and the motor works fine. When I press the PDL switch I hear a buzzing sound coming from the passenger floor area behind the glove box but the locks do not go up or down. I started the truck and when I put it in gear I can hear the PW relay in the fuse block clicking repeatedly. Put the truck in Park & the clicking stops.
I was told (on another forum) that the problem is most likely my GEM module. Bought a used 1 on eBay and installed it today but nothing changed.