Passat (B7) :: 2016 - Fog Light Bulb Replacement?
Sep 14, 2016
How to replace the fog light bulbs? I have a 2016 and would like to install LED bulbs.
View 3 Replies
Sep 14, 2016
Advertisement
Ford Super Duty (1999-2016) :: 2010 F250 - Map Light Bulb Replacement
How to change my map light bulbs over the front seat of my new (to me) 2010 F250 King Ranch with a sunroof. I have tried to remove the whole assembly with a plastic trim tool with no success. I have pulled as hard as I dare and figure there must be a procedure I am missing. It appears to me that the whole assembly has to be pulled down.
View 6 RepliesFord Super Duty (1999-2016) :: F250 - Bulb Replacement On Driver Side Mirror Light
How to remove the orange cover to replace the bulb in the driver side mirror - tried but worried I'm going to break it...
View 2 RepliesPassat (B5) :: Daytime Running Lights Bulb Replacement
Replacing the daytime running lights on 2005 passat. Can I purchase the bulb from an Autozone or the like.
View 3 RepliesPassat (B5) :: 2002 - Right Low Beam Xenon Bulb Replacement
2002 Passat W8. I need to replace the Right low beam xenon bulb. Looking for some pics on how to replace this! Or write a detailed description step by step on how to get this sucker changed out.
View 6 RepliesLexus RX 2010-15 :: Fog Light Bulb Replacement?
I can't seem to find a DIY on our generation RX to replace the fog light bulbs.
How did you do it? Under the front bumper, or pulling back the wheel well covers?
Prius (Gen 3) :: VSC Light Came On While Courtesy Light Bulb Replacement
While I was replacing courtesy light bulb, i got VSC light in my 2010 Prius. It doesn't go off. What can be the reason?
View 6 RepliesFord Super Duty (1999-2016) :: 2008 - LED Replacement Bulb?
Using LED replacement bulbs? I have a 2008 super duty. Want to upgrade lighting.
View 14 RepliesLexus IS 2014+ :: Backup Light With LED Bulb Replacement?
How to easily remove the old one to install new bulb?
View 11 RepliesLexus RX 2004-09 :: 330 / Tail Light Bulb Replacement?
Lexus IS: How to Replace Your Tail Light Assembly
Step by step instructions for do-it-yourself repairs
Browse all: Lexus IS Lighting Guides
Avalon 2005-12 :: Tail Light Bulb Replacement
My wife has a 2012 Avalon Limited. I also see that it comes with a side marker light as well. What is the bulb for the side marker light and how to replace it as well.
View 3 RepliesLexus IS 2014+ :: Replacement Bulb For Reverse Light?
I was wondering, what the replacement bulb for the reverse light on the 2014 is250 f sport was..
View 1 RepliesPrius (2004-09) :: Map / Dome Light Bulb Replacement?
I wanted to replace the bulbs in my map light but ran into some problems. I was able to remove the first see-through plastic cover on the light. Also I was able to twist one of the bulbs out of the socket so it was loose but there didn't seem to be a way to pull the bulbs out of their metal holders. I tried with medium to light pressure on the right side bulb and it slipped from my fingers and jumped back into the area on the other side of the metal holders. Now I can't see it or reach it. What do I need to remove to retrieve the bulb and how do I remove it?
View 6 RepliesPassat (B5) :: Driver Side Low Beam Doesn't Work After Replacement Of Both Low Beams Bulb
I had the heater core flushed, inspection done, a tie rod end replaced, and both low beams replaced to pass inspection in January. The driver's side low beam stopped working after a week.
When I would hit a bump in the road, it would start working for a while till I hit another bump and then it would go off. Now the driver's side low beam never works.
I could have gone back to the mechanic, but it's an 80 mile round trip(they used to be a lot cheaper than the dealership). Now that the weather is starting to get better, do you think it's a simple problem that I can fix myself? I don't want to waste 80 miles worth of gas just to have them charge me for something that they already charged me to fix. The next time I'm due an oil change I may go there and demand that they fix the light too, but I'm not going to waste 80 miles of gas just for the light.
Ford Super Duty (1999-2016) :: 2007 - Speedometer Bulb Replacement?
I have searched everywhere, but I can't find the information I need for anything newer than 2007. I have the instrument cluster removed, and I can't figure out how to get to the bulb. In previous years, it just twisted out, but this one is different.
View 7 RepliesSonata NF (2006-10) :: High Brake Light Bulb Replacement
After losing 4 bulbs trying to put the new light in from the bottom on my 07 Sonata's high brake light, I finally figured out, that if you take a dremel or other small cutting tool and cut of the tab on the bulb socket, the whole assembly will slide back into place from the top. Cut the tab even with the holes where the two wires go into the socket, and you should have no problems.
View 23 RepliesFord F-150 (2004-2008) :: Puddle Light Bulb Replacement
So I finally figured out how to get the puddle lights out of my factory tow mirrors. I want to replace the bulbs with LEDs.
But how do I take this apart? Looks like the clear plastic lens is superglued.
Santa Fe (CM - 2007-12) :: High Mounted Stop Light Bulb Replacement
I need locating the locking clips that hold the high mounted stop light assembly in place. Are there any diagrams?
View 6 RepliesFord F-150 (2004-2008) :: Overhead Console Map Light Bulb Replacement
How to change out the bulb(s) for the overhead console map lights. The lights that you push on / off. Since the owners manual doesn't cover bulb replacemnet for that.
View 14 RepliesLexus RX 2004-09 :: 2005 RX330 Head Light Bulb Low Beam Replacement?
The passenger side HID bulb of my 2005 RX330 need to be replaced, how to? Also there is condensed water in the assembly. I am going to replace it later. Where are other screws beside two on the top?
View 14 RepliesFord Ranger / B-Series :: 1997 - Instrument Panel Light Bulb Replacement
I just finished replacing the instrument panel light bulbs on my 1997 Ranger XL, 2.3L, 2WD pickup. I wanted to share how I did this. First of all, if you never have done this before, go slow and take your time removing the dash panels as they are plastic molding and break easily. Allow yourself about an hour to complete the task. You will need smaller sized hand sockets to remove the screws. The very first thing you should do is remove the negative battery cable from the battery. This way you will not risk shorting out anything electrical as well as possibly triggering the airbag in the steering wheel column.
The key piece in starting the process is to remove the radio first and then central console panel that houses the radio. It pops out very easily by gently prying it out in the four corners. Once you get that piece out remove the screws the support the lower knee panel. In order to get that piece off you will have to remove the two screws the hold the hood release lever in place. Get under the dashboard and look up as you lay looking upward near the brake pedal. Pull the hood release lever and you will see the two gold screws. Remove them. This will free up the panel on the under side. The top side of the panel will pop out if you pry it gently on the top two corners.
Next, you will see a metal panel underneath the knee panel. Remove this metal panel as well. Now you will be able to remove the instrument cluster panel piece. There are some visible screws holding this in place, remove them and gently pry the cluster panel out. Once the cluster panel cover is out you will have to actually remove the gauge cluster itself by removing the the four screw bolts that secure it in place. After the screws are out, gently work it out of the dash slowly as you will need to disconnect three electric plug harnesses in the back.
After it is unplugged and out, on the backside of the instrument cluster you will see some round, black colored thumb screw bulb housings that house the light bulb. Just twist them and turn making sure to go in the right direction. Feel it out for the direction, I cannot remember which way it turns. The bulb housings are labeled "ILL" on the circuit overlay. I recommend you replace all the bulbs as you might not want to have to do this again in the near future. Once all the bulbs are tightly seated and installed just reverse the above process for installation. This is a fairly easy job and like I said it takes about an hour. Make sure you test the lights after finishing.