My santa fe is throwing a vss code. I was trying to replace it but was not sure exactly where it was. Is it the one right under the air filter box or is that a crankshaft position sensor or some other one?
View 12 RepliesMy Santa Fe indicated P0715 for input speed sensor problem. I purchased both sensors and based on forum input I removed the air box and battery to access senors. Output speed sensor is easy to see and access. I am having a problem locating the input sensor. I see wires going to a sensor under both the main wiring harness and shift cable. Is that the location of the input sensor? If so how do you move the wiring harness and shift cable to allow access? If not, where is the input speed sensor located? The Santa Fe is 2001 V6 2.7L.
View 8 RepliesMy 2001 Hyundai Santa Fe V6 is giving out a P0118 code, and the "freeze-frame" data reports a -40F for the coolant temperature. That doesn't make sense so perhaps the sensor is faulty or perhaps the sensor connector is loose?
I'd like to take a look at the coolant temperature sensor but I cannot find it. I have scoured hmaservice, hyunda-forums but all the various pics are still not clear enough for me to actually find the sensor. I have seen all the online pics from Hyundai but I can't get my head around exactly where the sensor is - the pics are either too zoomed in or so many things have been disconnected for the purposes of taking the picture I can't get my bearings.
I have a 2001 Santa Fe GLS 4WD, I've had my Auto Transmission Speed Sensor replaced and will have the output speed sensor replaced to have speedometer/odometer and cruise control fixed. While having the first sensor replaced my mechanic noticed the Input Shaft Speed Sensor Connector (the plug on the wiring harness) was cracked. I've been looking everywhere for this connector. I don't want to buy the complete wiring harness because I've heard it is very expensive. I want just the connector. What is the part number of just the connector?
View 2 RepliesI need figuring out the speed sensor on my 96 ,k1500 series,5.7,4*4,automatic.. Where is it located...
View 1 Repliestrying to find the speed sensor on a 03 accent manual so I can fit cruise control
View 1 RepliesAlso posting here as my question falls in both forums.
[URL]
What is the location of the speed sensor on a 1991 automatic .. According to Haynes it is under the air filter but know matter how hard i look i cannot locate it .. Could it be that mine is an import from Japan so will have a different location ..
View 5 RepliesI am trying to replace the coolant temperature sensor for the electric fan on a 2007 Hyundai Santa Fe with a 3.3 engine but can't find it on the engine.
View 2 RepliesWhere the vehicle speed sensor is located on the 2007 es350. Reomoved battery and air filter box but just can't find it.
View 1 RepliesI've been searching and searching but I just cant find out the location of the Transmission Speed sensor, It would be the one that controls your speedo and Transmission pressure? Is it located on top of the rear differential?
View 4 RepliesI have an 08 avalon w/ 281k miles. NEED to replace the transmission speed sensor (P0500 code thrown). Where is it located on the trans and what is the part #? I'm thinking about servicing the trans while I'm there but looks like a lot of "comments" regarding this transmission and the problems with servicing it!?
View 9 RepliesWhere the Day / Night light sensor is located on the 2017 SFS? I am looking for more control regarding the brightness of the dashboard illumination.
View 5 RepliesI'm trying to locate the MAF sensor on my 2001 LC accent. I can see the air cleaner box, the tube which T's off to the surge tank, and then it goes straight into the throttle body. On the hmaservice website, it shows a MAF sensor between the air cleaner box and the surge tank (or "resonator"). I don't have that! There's concertina tube going straight from the throttle body to the air cleaner box (with T off). Am I just missing a part?? There don't *seem* to be any unused harness connectors lying idly around the place!
View 2 RepliesI have a 01 Elantra and my daughter has a 02. Both cars have the camshaft sensor at the front (timing belt) end of the engine. My daughters car is a early model with a 01 engine in it. My understanding is that later 02 engines moved the camshaft sensor to the ignition coil end of the cylinder head. My question is did the timing remain the same so that if I put a 01 engine in a late 02 body and spliced the sensor in would it work correctly?
View 8 RepliesI've got a 2001 f150 XLT and I've checked the Haynes manual and searched Google but I'm having no luck.
I'm trying to locate the sensor for the Automatic Head Lights.
I had a small "spill" on the dash at night and immediately the lights started to blink and click. It fixed itself but sometimes it will do a weird little "click, click noise" change thing. I would like to clean the sensor or ensure it's not partially blocked.
I have a 2004 Santa Fe with 2.4L 4 Cylinder engine. I have the inexpensive Duralast CV1139DL PCV valve but cannot figure out where to install it.
View 1 RepliesWhere cylinder 1 is located on my 3.5l v6 santa fe. I am replacing the heads and need to know.
View 2 RepliesMy mother in laws 2012 Santa Fe had a number of dash lights on (ABS, hill decent, stability control). I put my scanner on it and came up with fault code C1209 which showed up as a faulty right rear wheel speed sensor. I have replaced this module and then cleared the codes.
However, the dash lights still light up and the vehicle continues to throw the same code. I don't work on Hyundai's very often so I am at a bit of a loss.
So I am getting a CEL and p0501 (Vehicle Speed Sensor) code and don't quite know how to approach it.
Other forums/posts suggest that I check or replace the input and ouput sensors on the transmission, but from what I understand those are each a unique code, and the p0501 is for a sensor located on the transaxle. Is this the case?
I was under the impression that because my car did not have ABS that I did not have the latter sensor on the transaxle, only the input/output on the transmission. If that is the case, will replacing both eliminate the CEL/p0501?
I want to change the glow-plugs on my 2004 Santa Fe CRDI to see if it cures its rough/smokey start up, but I am not sure of their location. I think they might be under the intercooler, but I don't want to strip it all down to find out they are not there.
View 8 Replies