I have a klunk/rattle in the drivers side front end when I go over a small bump at a slow speed. The dealer said it was the struts - they replaced them along with the upper support thing. Noise still there, next they said it was a worn motor mount - noise still there --
View 1 RepliesI have a clunk/rattle in the drivers side front end when I go over a small bump at a slow speed. The dealer said it was the struts - they replaced them along with the upper support thing. Noise still there, next they said it was a worn motor mount - noise still there --
View 3 RepliesI have a clunk/rattle in the drivers side front end when I go over a small bump at a slow speed. The dealer said it was the struts - they replaced them along with the upper support thing. Noise still there, next they said it was a worn motor mount - noise still there --
View 1 RepliesI have a klunk/rattle in the drivers side front end when I go over a small bump at a slow speed. The dealer said it was the struts - they repleced them along with the upper support thing. Noise still there, next they said it was a worn motor mount - noise still there
View 1 RepliesMy 03 Camry LE has a weird clunk/rattle in the rear driver side only. This happens when i go over bad portion of road, not like potholes just uneven bad road. When the suspension moves quickly. Car has no weight in back. It sounds like something metal is loose in that side, the other side is tight and makes no noise. The struts were replaced in january by previous owner, someone told me it was the rear links which i replaced and still same issue, checked sway bar bushings and those are good.
View 14 RepliesI was pulling out of the driveway and heard really loud snapping noise. Jumped out of the car expecting to see damage, but everything looked fine. I didn't drive over anything or hit anything.
Now, I notice that when my left front wheel goes over bumps and potholes there's this metallic rattle. Took it my mechanic right after and we both looked the front suspension over. Everything looks good. It does drive fine.
I have a 2002 Camry, and recently on the passenger side towards the front wheel there has been a fairly persistent thump or clunk when I brake at low speeds (i.e. immediately before a full stop). I took it to my local mechanic yesterday to see if he could figure it out, and unfortunately he wasn't, although he did point out that my dog bone was cracked and suggested changing that out. Afterwards, the thump/clunk did seem to be more subdued, but it's still obviously there.
View 12 RepliesThe car is a 2004 Suzuki Aerio with 68k miles on it. I've owned the car since 25k miles, and performed all maintenance on time. The car was also maintained well before we owned it (receipts). I've taken it to our garage 5 times now, for the same noise. Here is the timeline of events:
1) Two months ago started making two noises (rattle over bumps and a faint clunk on driver's side when turning). Garage replaced control arm assembly on both sides.
2) Took it back a week later because it was still making clunk (It got worse over this week, and then stayed at this level. I can feel it under the driver's side floor board. Sounds like a clunk/cracking noise) and was making a new rattle. Garage said their air wrench was messing up the first day and a heat shield came loose.
3) Another week later, still making clunk and making yet another weird rattle/grinding noise over bumps. Garage said this time that it's another loose bolt on the control arm assembly. Tightened and double checked everything. They seemed apologetic and embarrassed about the loose bolts.
4) Another two weeks later, still making the clunking noise. I take it back and take our mechanic for a ride. He hears it. I call back later that day and they say they can't find anything wrong with it (checked struts, front suspension, and cv joint). I speak with a different mechanic and he tells me "we don't do any fancy hard turning when we take the cars for test drives. We drive them like most people with old cars drive them." This seems to infer, to me, that it's only making this noise because I drive my car hard. Fyi, I drive reasonably. They say they had my mechanic, the other mechanic, the shop owner (who was on vacation that week), and ANOTHER mechanic from a different garage looking at it, and they can't find what's wrong. Bring it back next week.
5) Yesterday, they say they looked everything over and couldn't find anything wrong. Said they would have to diagnose it by feel. I have to work, but my husband picks it up and says they said it's play in the drive shaft causing this noise, and that they didn't seem worried about it. I only paid for the first visit.
Does this sound reasonable? Should I take it somewhere else for a second opinion? It does it on turns weather I'm on the gas or not. I like this car and I'm hoping to keep it for at least a few more years.
Trying to diagnose the below clunk noise as the accelerator is initially pressed?
[URL] ....
If there belt tensioner wobbles like this on a 2azfe? There is a noise as you initially press the accelerator but then disappears. You can hear it in the video. I know there is a tsb on the tensioner but the belt doesn't look like its loosening off.
It all began on my 1997 Camry when the driver's front turn signal began the rapid flashing thing, indicating to me that the bulb in the front was out. I replaced the bulb. The running light part works, but the flasher still does not. On the front passenger side of the car, the turn signal works, but the running light does not. I replaced the passenger side bulb at the same time I replaced the driver's side bulb. The flashing turn signal works as it did before, but the running light still does not go on.
The problem shouldn't be the bulbs - they are new. The flasher unit behind the fuse box should affect both lights flashing, so it probably is not that.
What thing or things can cause one light to flash for the turn signal but not be on constantly for the running light (passenger front side) and to work as a running light being constantly on, but not flashing as a turn signal (driver's front side)?
Recently got quite a noticable clunk/knock from the front driver side of my '10 Sonata with the 2.4.
Only happens at low speeds, most notably in parking lots.
My best guess is a stabilizer link or a ball joint.
Took a video to explain the sound I am hearing.
Sonata front end clunk - YouTube ......
I have a rattle in my drivers side front hub. I primarily hear it when I hit small bumps. With the hubs locked and in 2wd, the rattle is gone. Could this be just the hubs where replacing them with warn manuals would fix it or is it likely more involved?
View 6 RepliesProud second owner of a nice passat wagon auto with 94k miles.. Slightly worsened the last 10k miles is an occasional clunk from up front, driver side..
What seems to happen is say slowing down to a red lite, when it suddenly turns green so the throttle input either causes an engine mount or something to do with second gear makes a clunk.. if I'm real smooth with the gas pedal I can avoid this noise.. and if I run the engine all out thru the gears I don't notice it.. The car is stock..
I've been having this ongoing clunk in the front of my 06 Avalon for about a month now. When I slightly hit the brake i'm getting almost a metal on metal clunk sound from right in front of the drivers side wheel area, or possibly on the other side wheel well area, and not sure if its related but a popping noise when i turn my wheel a certain way it seems.
Replaced:
Both CV axles
Both Rotors
Both transmission mount and engine mount (left and right side)
Dog Bone torque bar on top
Drivers side caliper
Control arms
Struts were replaced 6 months ago, and reused old mounts, so I took it out and replaced the strut mount with the bearing on passenger side only.
Control arms have been replaced 4 or 5 times in 6 months because they keep cracking, they are being installed correctly and still having the issue, they're slightly cracked right now (many tiny little rips in the rubber rear bushing of the front control arms) perhaps this is the problem and they're flexing too far? They're Dorman and ordered off of amazon. I have 2 replacement ones arriving tomorrow and will throw them in.
124k miles. I have had multiple shops look at it and cant figure it out, they said everything is tight. One shop said it was internal transmission.
I have a klunk/rattle in the drivers side front end when I go over a small bump at a slow speed. The dealer said it was the struts - they repleced them along with the upper support thing. Noise still there, next they said it was a worn motor mount - noise still there -
View 8 RepliesMy c4 when new made a rattle noise only in the front drivers side tire . Can be heard while the window is down and while hitting bumps on the road or the lane dividers reflectors. botts dots i believe.
View 19 RepliesI have a rattle coming from the drivers front area. I'm not 100% sure but I think it might go away in warm weather. I had a tech drive along with me once a few weeks ago, but we couldn't hear it that afternoon. Yesterday afternoon it warmed up to around 65ish and I couldn't hear it. I only hear it at slow speeds (5-10mph) and only when rolling over light bumps, anything moderate to heavy and it's not discernible.
This is my first try at recording it and I think it sounds a bit less squeaky more rattley in person. Maybe more like a lost screwdriver in the a body panel or engine bay or something Or a loose strut? Or a loose rotor? (doesn't seem possible) Or the short shifter bouncing? (I have a forge SS, and once I was poking around looking for something loose in the engine bay and I jiggled that and the sound seemed close, but I don't see how that would be it.
Some good examples in the clip are at 15s, 28s, 52s, and 1:02s
[URL] ....
My 2014 Camry XLE has the drivers side door rattle. What is it inside the door that rattles?
In comparison, my 2012 Corolla LE was built in Japan and was just as quiet as a mouse inside.
This is the only rattle. So small and so persistent. It comes and goes, sometimes lasting an hour, but when it is gone it is definitely gone.
I can tap on the panels, open and shut the door, run the window up and down and yet it continues to rattle. Then, all on its own, it disappears. Sometimes for days without making a peep or a squeak.
It is not the Seat belt, nor is it anything attached to the seat belt. (If anything should be rattling it should be at the seat belt pillar adjustment).
My 1998 V6 Camry has rattle on right front and now starting on left too. Bad shocks were replaced and still rattles going over bumps at speeds 20-35. Don't notice on freeway. Car drives fine, no pulling or other problems just irritating noise at slower speeds. Two different mechanics say the Strut mount plate is loose. Could not find any other problems? Is it okay to leave the mount plates in place? Mechanics say other than annoying there isn't a problem.
View 5 RepliesI have 2002 sc430 that i purchase new. I now have a rattle from roof on driver side back behind my head above the little window....
View 10 RepliesMy LS460 recently developed a rattle from the front drivers side. It's triggered more by rumbles/vibrations from an uneven surface rather than speed bumps or large pot holes.
It sounds a bit like a washer vibrating on a metal tray (for what that's worth)!
Interestingly though it gets a LOT worse when the car is in 'Comfort' suspension mode, and is nowhere near as bad in 'Sports' mode. So it seems that having the suspension higher gives this thing more room to rattle.
I noticed in the service history that the front passenger air strut was replaced 30k ago, so I'm worrying that there is a large bill on the horizon.