Ford - Explorer :: 1998 - Right Turn Signal Recently Stopped Working / Hazard Lights Work
Oct 23, 2016
The right turn signal on my 1998 Ford Explorer recently stopped working. The flasher was making a horrible buzzing sound when I tried to signal right, but worked fine signaling left.
I just replaced the flasher, which has cleared up the buzzing noise when trying to signal right. The flasher clicks like it's supposed to, but the lights still do not flash.
Here's a summary of the current symptoms:
-Hazard lights work fineFlasher clicks; interior indicators flash; exterior lights flash
-Left right signal indicator works fineFlasher clicks; interior indicators flash; exterior lights flash
-Right turn signal does not work
-Flasher clicks
-Interior indicator stash off; exterior lights stay off
What to check next???
View 4 Replies
Advertisement
I have a 2003 V10 Excursion with an electrical problem. The right turn, right brake and right hazard light do not work but the flasher makes the clicking noise. When the right turn signal is on, the right front turn signal light works but is at double speed. The right rear light does not work. Same when brake and hazard are applied.
I checked the bulb socket with a multi meter and have no current. I also checked my trailer plug and have all functions work. Fuses were checked also for the brake circuit and were all ok.
View 4 Replies
I have a chevrolet optra 2007 and the hazard lights won't work unless the turn signal (left or right) is switched on at the same time. Turn signals work perfectly fine.
View 7 Replies
The turn signals and hazard lights on my nissan sentra are working some times and all of a sudden they stop working. The problem is occuring almost every day. What could be the problem?.
View 4 Replies
I have checked the fuses for the Hazard and the Turn Signals. Both look fine. I tried replacing the turn signal flasher (which was a task in itself). After all of this it is still not working. What else could it be? Simple short?
View 2 Replies
I've got a 2001 f150 supercrew 4x4 with the 4.6. I plugged in trailer lights and now I have no brake, turn signal, or hazard lights. I've checked fuses and none are blown.
View 8 Replies
I have a 1998 Ford F150. The turn signals do not work nor the hazard flashers. When I trun on the hazard flashers(they do not come on) the turn signals will then work. Checked all fuses both under dash and in the engine compartment. With flashers turned on and using the turn signals, the relays located in engine compartment are working. It appears that the only way for the turn signals to work is to recieve power through the hazards.
View 2 Replies
The turn signals/hazard flasher on my 99 Sebring Jxi stopped working a couple of weeks ago. When I use the signal lever or press the hazard flasher switch, you don't hear any click of the flasher relay, and the lights (front and rear, and on the dash) don't light up at all.
So far, I have:
* Checked the fuse
* Replaced the flasher
* Replaced the turn signal switch
* Replaced the flasher AGAIN (mechanic says that if there was a problem with the turn signal switch, it can burn out the flasher)
* Checked the fuse AGAIN, and even replaced it (even though it's the same fuse for the wiper/washer, and that's still working)
I asked my mechanic about it, and he said that a bad ground can also cause problems. The big question is: where do I begin to look?
View 3 Replies
I have a '97 AWD and my brake light, turn signals and emergency flasher have stopped working. I've checked all the bulbs, checked all the fuses (under the dash) replaced the flasher just in front of the fuse box...nothing. All the running lights work, and the 3rd brake light above the rear door window works.
View 3 Replies
3 weeks ago my father (who died 2 weeks ago) gave me his 1991 Infiniti G20 which he has kept in great condition over the years with the last few being the exception. He's the original owner and I have paperwork from every repair and service it's had. Unfortunately the issue it has now started happening after he passed so I'm not going to get info about how it's been running the last couple years. Now to the good stuff.
When I got the car it was outside under a carport like always (lives near Seattle). I drove the car about 200 miles and then a couple days later I noticed the turn signal stopped working, but not only that there were several things not working. The turn signals (yet hazard lights work), the seat belt motor will not let it roll back across my chest, the blower won't work but the AC and heat still works, the rear defogger stopped, the ABS stopped, and the warning lights and sounds for doors open and seat belts were undone don't work.
Then while driving everything just "clicked" back on for about 5 minutes, then "clicked back off the rest of the drive. The next day I started the car, everything was fine but after waiting a couple minutes for the windows to get defogged everything shut off again. Driving around with foggy windows, no turn signals, and no seat belt across my chest is starting to scare me. Oh, and the problem can turn on and off without the engine on. If I just put the key into the "on" position it will sometime switch between working and not working.
I have unplugged and replugged the fuses and relays on the left side under the steering wheel, I've checked the voltage of the battery (2 years old with 7 year warranty and alternator was replaced 18 months ago) and it was about 12.4. I've tried reading the wiring diagram in the service manual without any luck figuring it out. When I took it to the Nissan dealership they did their scans and couldn't recreate the issue and charged me $100 just for doing the electrical tests.
I want this car to keep going since it has 174,000 miles and runs great (manual trans) so need to figure out whats going on. It doesn't seem like it's a loose wire because the car doesn't have to move for it to go back and forth between working and failing. It sometimes works more often if the car is kept in a garage but even then I'm not sure. At one point in the last year a couple mice got into the trunk but they have since left and I don't see anything in the manual that says they could have effected anything all the way back there.
View 16 Replies
My Jetta has had an off-and-on clicky turn signal sound without turn signals or hazard lights actually blinking. I put up with it for a while, but recently it's been more clicky than not. I'm aware this is a common problem. I had already tried the cleaner spray "trick" which made the problem worse if anything. Today, I removed my signal stalk as described here and gave it a cleaning. After re-assembling, the clicky problem didn't go away, and now the high beams are always on (even with the key out of the ignition, and the car isn't running). I temporarily dealt with this by pulling fuses 18 and 19 for high beams. It's an ok short-term workaround. Low beams still work fine.
I'm considering replacing the hazard signal relay, but a while ago I messed up while trying to use ghetto removal keys to pull my radio.
View 4 Replies
I just bought a 98 passat sedan v6 four days ago. When I purchased it the turn signals and hazards were working. I was driving yesterday and they went out all of the sudden. Thought it was the fuse at first, changed it, still not working. I bought a turn signal flasher relay, but the repair manual doesn't tell me which one it is so I can change it.
View 2 Replies
Recently my Infiniti G20's turn signals and hazard lights stopped working. I replaced the flasher relay and turn signal switch but it did not solve the problem. Here is the kicker or clue. The lights flash when locking or unlocking the car with the remote FOB.
View 7 Replies
My wife's 2003 sportrac has developed a problem. The left rear turn signal brake light will not work. The tail light does. When you turn on the left turn signal the front bulb and the dash light flashes real fast. I have changed both, the front and rear bulbs with no luck. I've read on here about the tilt steering column deal. I have moved the steering column while operating the turn signal with no change.
View 4 Replies
My passenger side front signal light works properly, but when I turn my hazard lights on it will not blink normally (the other 3 blink). Inside my truck when looking at my dash I see the small green blinking arrow for the left signal, but not for the right when the hazards are on. When using the signal normally, I see the small blinking green arrow for the right signal though.
1997 F150 Supercab, 4.6L V8
View 3 Replies
Purchased new one from Advanced Auto parts. It worked for a few days and is back to doing what the other part was doing. When I engage the lever to turn right it works but when try to signal to the left it doesn't always work. It makes a noise that sounds like it is shorting out and doesn't turn the signal light on.
Depending on how I have the steering wheel turned, sometimes I can hold it to allow for the signal to blink. I replaced the lever, that BTW, also operates the brights and the windshield wipers, for the very same malfunction. I was not able to pass TX state inspection. Now I,m wondering if it isn't something else that may be causing the lever not to engage. can it be a loose wiring harness?
View 12 Replies
My 2007 F150's turn signals and hazard lights quit working. I checked the fuse and it was blown. Once I pulled the old fuse out the truck wouldn't start at all. What happened?
View 3 Replies
My turn signal on the driver’s side isn’t working. It clicks quickly like when the bulb is out. The rear one on that side still works, but blinks quickly…which is normal when the front one isn’t working. It didn’t just stop working all at once. Over the course of the last year or more, it has gradually gone out--it would work for a few days and not for a while. A few months ago, it worked about half the time. Now it won’t ever work and I’m due for an inspection. Here is what I’ve determined so far:
It isn’t the bulb…I’ve tried a new bulb.
It isn’t the socket. I took the socket in my hand in the picture and switched it with the passenger side and the driver side still didn’t work and the passenger still did worked.
The plug that the socket goes into on the picture…I cleaned it good and used a little lubricant on it, but that didn’t work either. If that plug is bad, the local parts stores don’t carry it and can’t get it, so I'll have to go to the Ford House.
View 9 Replies
It only does it when it is fairly cold out and when it sits overnight. I will get into my 2000 4.0 Explorer and when I put my foot on the brake my right side turn signal comes on, it doesn't flash it just comes on and stays on. When I let off the brake it goes out. It will do it maybe four or five times and then work fine all day. Its just the right side and the indicator on the dash comes on too. I haven't looked at a wiring diagram yet to see if there is a connection between the two.
View 7 Replies
I have a 98 4door 4x4 auto. Reverse stopped working a year ago. The forward speeds work perfectly. I hate to have to rebuild the entire trans. I've been driving it some, being careful where I park, but getting tired of it. My question is do you have to pull and take the trans all the way apart to fix this?
View 7 Replies
I have a '98 Jeep Wrangler with various problems, but the most recent one has to do with the turn signals. When I intentionally use them, they seem to be working, but when I haven't signaled I still hear the ticking sound, only double-time. The sound is normal when I turn the signal on, and only stops when I apply the brake. I recently took the top off and left the Jeep uncovered in a couple of storms. Could this have caused electrical damage? Also, the left turn signal has required some finesse for as long as I've had the car--I've always needed to fiddle with it to get it to turn on--so I'm wondering if it's a wire connection that has deteriorated over time.
View 3 Replies
