Saturn - Ion :: 2002 - Won't Start - Key Stuck In Ignition
Jan 7, 2013
I have a Saturn Ion 2, 05. I will intermittently not start. I put the key in the ignition, power comes on, turn the key, it clicks a couple of times and then everything turns off. The key is then locked in the ignition. It is a new key. My old key looked chewed up. The only way to get the care to release my key is to open the hood and wait a few minutes and then shut the hood. Power will come back on and it will release my key. I used to be able to start it after that but now it seems like it is becoming more and more difficult to start it. I have read about a loose fuse box under the hood, replacing battery, replacing ignition switch and resetting passcode. Im not sure where to start first. I do not have the extended warranty and am on a tight budget.
View 7 Replies
Advertisement
The key will not turn to off, stuck in acc. I have no power to the windows, sunroof, seat and seat heaters, and no brake lights, and the mirrors have no power either. I took the car to the local GM dealer who told me the ignition was not in any recall and found that the Body Control Module was bad and needed replacement.
View 5 Replies
My Saturn 2000 LS1 has an intermittent start up problem. If the ignition doesn't complete engagement, the engine shuts down. After a 12=15 minute wait, I try to start again and it engages and starts. (I think the computer has to be re-set, thus the delay)
Nothing shows up on code except "security" but no fix.
I noticed using the remote caused this problem more often. So no longer use it. Also, got a new ignition key which worked. We think it has something to do with "security" as the light comes on....intermittently. Is there a replacement part for the "security" system? Checking your site, no one else seems to have had this problem.
View 2 Replies
I've recently purchased an 02 Envoy from an auction. There are a couple of issues. The main one started last night. While at the store I put the truck in park and turn off the ignition. The ignition will not go into the lock position. I messed with the key and go it to turn off. Then started the truck to leave and couldn't put the truck in gear. I messed with the shifter and was able to put into gear.
At that point the gear shifter would move from park to reverse without me pushing the break pedal. I drove home and could not turn the key all of the way off again. Moved gear selector from 1st to Park a few times and then was able to remove the key. I restarted the truck and could not move the gear selector again; however I was able to remove the key easily.
I am leaning towards replacing the "Neutral Safety Switch" on the tranny but with my symptoms, I've seen brake light switch, ignition, and solenoid at gear shift selection.
Back up lights do not work either. Since I purchased the truck, I've replaced,
-Battery
-Ignition Coil
View 9 Replies
I got a good deal on a 04 phaeton because of some electrical problems. I am starting the research to get it figured out, and there is a lot of info on the site which is great.
The problem is the key is stuck in the ignition (I got it out via the emergency release) and it can turn left and right and the car will not do anything
I put good batteries in the car since they were dead and there is no change.
My scanner (launch master) will not connect because I'm assuming I can't get the ignition key to switch into the "ON" position.
I love this car, but I don't love electrical problems!
View 19 Replies
My 1999 Saturn SL1 was running well. One evening, I started it up to go home, and it wasn't running well, and barely had power to make it the half mile home. It still starts up, but seems to miss in park and in gear. We tried spark plugs, wires, coils, catalytic converter, cylinder pressure, crankshaft position sensor, and fuel filter with no change in engine behavior. I think the EGR valve was looked at and passed. I hope it is not the fuel injectors as I put a cleaner in the fuel every so often. Could it be the Ignition Control Module, and is there a way to test the existing module? What else could it be, and how could I test it?
View 6 Replies
My key got stuck in the ignition and I was unable to start it. The owners' manual shows a small hole to the left of the key slot which is poked with a paper clip to release the key. At some point the ignition in my tdi was replaced and no small hole is present. A knowledgeable tow truck operator/mechanic coaxed the key from the ignition and the tdi started when the key was returned to the ignition and turned. What is the proper way to remove a stuck key from an ignition without the little hole. I was reluctant to force it out. The ignition currently in my '04 tdi has a raised bar to the left of the key slot which I was unable to depress.
View 3 Replies
I have a 97 Bravada. Recently the check engine light came on and then went off. I didn't think anything of it at the time till the other day I drove it to work and back fine without any issues, then the next morning I tried starting it and nothing happened. No cranking, no interior lights, no sounds.
I tried jumping it thinking the battery was dead but that didn't work. Now my key is stuck in the ignition in the accessory position. It will not turn all the way back to release the key.
View 11 Replies
I have a 2003 2.4L 5 speed manual Santa Fe. I was parking my vehicle and removed my key as usual and realized that the car was still running. I put it into reverse rolled back and back into 1st to roll forward just to make sure I wasn't dreaming. I ended up pulling the fuel pump fuse and disconnecting the battery to turn it off.
When I replaced the fuse and reconnected the battery I was able to bump start the vehicle without the key in the car and drive it all the way home with no problem. I took apart all the plastic pieces around the Ignition and attempted to remove the cylinder but was unable to locate any sort of small button or pin to push on to remove it. Where is the release button?
What are my options here? Do I replace the cylinder first or get a new key, or is there something else that I should check first before I take it in.
View 1 Replies
'04 RX330: Starting about a year ago, occasionally when inserting the ignition key it wouldn't turn to start. Take key out try again and it would start. Progressively, it seems to be requiring more and more in/out cycles to get the key to turn. It's like the transponder is not recognizing the key FOB. I have two keys, one is a master and other is a sub key, both have the problem. What has to be done to correct it? I'm afraid the dealer will just change some expensive ignition part when there's an easier fix.
View 14 Replies
My mom has a 2002 Saturn l300 v6. She's never had any problems with it except having to get a new computer about a year ago. About 3 weeks ago she got rear ended and ever since then it has had trouble starting. The few times it did start, it wouldn't idle and died. She replaced the fuel injector, but it kept doing it.
It's been at the mechanics ever since then, and everything I've looked up says it might be the fuel pump itself, but that raises the question of wouldn't our mechanic have found it by now? I've been told that it's either wiring or the pump, but when I bring it up I'm shouted down because nobody thinks that it could be those things.
View 2 Replies
Recently replaced spark plugs and wires on 02 SL1 with 209K miles. Was running rough, rough and high idle, almost died on me driving home one night. After replacing everything, car still wouldn't start. Spent some time on the forums and some suggested a leaking intake manifold gasket, so I changed that out as well as the coolant temperature sensor. Still it won't start. I am getting good spark at the plugs (coil arcs across the posts when plugs wires are off).
Really not sure where to go next with this. I can hear the fuel pump hum when I turn on the ignition, and I get a good spray at the fuel rail. Basically I turn the key and it cranks, sputters, and will almost catch, but then not. What next??
View 2 Replies
2002 vw Passat GLX 4motion... Car has been driving fine with no issues. Then out of the blue it just won't start back up. Battery is 6 months old. And wouldn't start with a jump. I think it is a completely different issue. The power windows stopped working but other features do work like stereo power seats interior lights...Main problem is no lights on dash whatsoever. But when key turns from accessories position to starting position nothing happens. No clicking, no resistance between positions it is as if the ignition is just missing..?
View 2 Replies
I have a 2002 Chevy Impalah 100k miles that frequently won't start. When I put the key in the ignition, I get lights, radio, and all electrical signs. But no sound from the engine. No matter how many times I try to turn the ignition, I get nothing.
But then when I stop trying and then come back to the car 5 to 10 minutes later, the car will start with no problem. This seems to happen randomly--sometimes first thing in the morning, sometimes after being parked for an hour. I can go for days with no problems and then it will start happening (randomly) again.
I just brought the car back from a dealership--they couldn't reproduce the problem and can't find anything wrong with the car. What systems or parts might be malfunctioning?
View 6 Replies
One night i get into my car its a 2002 mk4 golf 2.0 engine and i turn my key to start it and i turn the key all the way and i am getting no sound at all no clicking or even the engine trying to start. the key just turns all the way and thats it my stereo turns on and my interior lights turn on but my headlights dont turn on and my cluster gauges needles dont move at all . its like my ignition is not sending any signal to the engine or my cluster gauges. the cluster lights work but that it. when i turn the key to start i am getting nothing . What this could be?
View 8 Replies
My son has a 2002 Explorer 4WD EB that needed new valve and intake manifold gaskets. I pulled it apart this weekend (battery disconnected) and replaced (don't get me started on the passenger valve cover with that *@&$^ EGR valve in the way). He's also had issues with the key being removable from the ignition when the vehicle is still running (worn key and/or cylinder most likely). So when I put his key in to test my gasket job, it won't go in all the way. After much trial and effort, I call a mobile locksmith who has to drill out the old cylinder and rekey/replace it (keyed to use the same, single old key we have).
Now, the cylinder turns happily with the old key. In the "Run" position, all the dash lights come on as they should, but turning then to "Start", caused a loud single click, then the dash goes out, and the engine never even tries to start. Then, nothing electrical in the car works unless I disconnect the battery for about 10 mins, then reconnect. Upon trying to start, the same thing happens (good dash lights at "Run", then single loud click from the engine compartment, then nothing. It seems maybe the PAT has lost its memory of the old key?
I watched and assisted the locksmith put the cylinder and PATS antenna back together, so I know connections/placement of that is good. At this point, I'm about to lose all the money I saved on the gasket job to the freakin' ignition issue.
View 9 Replies
I have a 2002 Passat GLS and when I tried to start my car this morning, it would not start. When I turn on the ignition, the car gives off a loud clicking sound. The interior and exterior light works, the panel light works, and the radio works as well. What might be the problem?
View 4 Replies
I have a 2000 Staturn LW2 auto, 6cyl. When I try to turn on the car, sometimes the engine does not turn, doesn't make a sound, nothing. When I move the steering wheel, it turns on fine, it has to be in a certain position. Does that mean, the ignition switch is faulty or is it the pin? Is there a test I can do?
View 7 Replies
Do I need to do anything other than disconnect the battery to disable the airbags on this car so I can replace the ignition lock?
View 30 Replies
Have a passenger front window stuck in the down position. Managed to get the door panel off and trying to just push/pull the window up manually is not working. It seems to be really stuck. The window hadn't really been working very well for a while now, but I couldn't resist trying to open it since it was hot. So it came down with no problem, but now I can't get it to close again. When i push the button, we can hear a little click somewhere near the motor of the window -- but nothing's moving. The gear that feeds into the window motor will not budge when we trying to manually rotate it. And there are 2 crossed bars running in horizontal tracks that appear to be what pushes the window up and down. Pushing up on those doesn't do anything. The thing is I don't necessarily care if the window works again, I just want to close it. 1996 Saturn SL2
View 2 Replies
My Saturn 2000 LS1 has an intermittent start up problem. If the ignition doesn't complete engagement, the engine shuts down. After a 12-15 minute wait, I try to start again, it engages and starts. (I think it has a computer and the computer has to be re-set, thus the delay and re-start)
Nothing shows up on code except "security" but no fix.
I noticed using the remote caused this problem more often. So no longer use it. Also, got a new ignition key which worked. We think it has something to do with "security" as the light comes on....intermittently. Is there a replacement part for the "security" system? A fix.? Checking your site, no one else seems to have had this problem.
View 5 Replies
