Went to leave for work this morning and released the parking brake and she wouldn't budge. Had to give it quite a bit of gas to finally move, along with a big popping sound. It was cold out, and haven't been using the PB in cold weather lately but did yesterday and this happened. Is there something that needs to be done with the brake? Thought I might have to get towed.
View 1 RepliesDoing a rear brake job on my 2008 elantra. Left went fine. However, the right rotor is stuck on the parking brake. It is loose, but held on to the springs of the parking brake.
How do you back off the parking brake? Also, how do you remove the parking brake cable?
I was driving my 98 Tahoe yesterday making a visit to my sister. pulled the truck into the drive-way, put the gear selector in park, stepped on the parking brake (a habit I've had for years) and YIKES! the peddle moved down with no resistance!
my parking brake light stayed on even after I released the parking brake peddle, which didn't spring back, but I pulled it back. light stayed on when I started the truck although I think the brake never engaged in the first place.
I drove the truck and didn't notice any drag at all. after driving a few miles I stopped the truck and felt the wheels for excessive heat but didn't experience that. my guess is the cable broke or came off and didn't engage the parking brake in the first place. sound correct?
The closest car wash is less than two miles from our home and we often bring the GX home directly from the car wash and park it in the garage. We've noticed that the parking brake remains applied when we start the GX the next morning, even though the foot pedal releases. Presumably, the parking brake components were wet from the car wash and enough rust/corrosion forms overnight so that the springs to release the brake can't overcome the 'stiction'.
The GX "squats and grunts" when we put it in gear, but doesn't move. Shifting into reverse solves the problem ... there's a loud 'pop' from the rear of the vehicle as the brake releases, the GX starts to move, but in reverse, which we quickly stop with the service brake, then we shift into forward and drive off ... did I mention that we back into our garage?
I may already have confessed that we are heavy parking brake users ... every time we park the vehicle, even if just temporarily while we step out of the vehicle to get the mail, etc. We use the parking brake so much that the cable stretches and every year our dealership has to re-tension.
Suddenly all these lights came on in a 2012 Elantra . Had at the dealer and they checked wheel speed sensors, wiring to sensors and said all those are ok and the abs module is bad. I replaced the module, bled the brakes and the exact same lights are still on with the same codes coming up. Tech is confused as I am.
View 5 RepliesPast a month, I am having a constant *ssssss* sound from under the vehicle when the Car is IDLE with engine ON. It is very obvious when I am standing outside next to the vehicle, I don't know if it's normal or not.
View 6 RepliesI have a new 2015 Elantra GL Manual that seems to have an E-brake that does not feel like it holds the vehicle solidly. I know that the E-brake is probably a small drum brake setup in the rears only but feel like an adjustment can be made to really ratchet that lever up better?
The other issue is a humming, buzzing, vibrating sound in the front passenger side area at hwy speeds. Maybe a vibrating splash shield or rock stuck under the shield?
I was also able to get some new alloy rims for a good price (FAST brand) from the dealer (believe it or not). They aren't the sexiest things to look at but I needed another set of rims anyway to winters and the price was better than plain steelies. I'll probably use the OEM steels for winter now and alloys for summer. The alloys are a little wider at 7 inches than the OEM 6.5 inches and much lighter. I plan on getting Michelin X-Ice soon.
Just got my hair cut and go to start my car and the damn thing is stuck!! The check engine light is on and there is a P with a circle and a line through is like a no smoking sign. IT says parking brake fault see owners manual. Well I can't find anything in the manual as to how to get this thing to release. The car is on a slight hill, nothing steep. I know for a fact I did not put it on. Manul says it will test itself if not used for a long time. How to get this car moving? Its sitting there about 2 miles down the road.
View 24 RepliesI have a 2004 Elantra GLS. My left rear brake was hanging (wheel was very hot to the touch after driving, while other wheels were not), so I had a friend check the brake pads. We decided to replace the pads and rotors. While doing so, the parking brake seemed stuck in the on position, so I opted to have him disconnect it completely until I could afford to replace it. I had used it for the first time about 2 weeks before I noticed the hot brake problem, so we figured that must have been why the brake was hanging.
My friend replaced the rotors and pads, put some penetrant/lubricant on the piston of the caliper and reassembled the brakes. He did use the special tool to spin the caliper in when putting the pads on, however he didn't know that was necessary and tried to force them in with a C-clamp first.
Now, I seem to have two problems:
1. The left rear brake still hangs sometimes. I will drive the car and when I park it I can feel the heat coming off of the left rear wheel. It is extremely hot, so I know the brake is hanging (even with the parking brake disconnected). What is the problem here? Is the caliper bad? Would replacing the caliper solve the problem? Does the parking brake have to be connected to stop the caliper from hanging up?
2. My second problem is the pulsating of the brakes. I am afraid the rotor is warped because of the heat, or maybe he didn't clean everything well enough before he put the new rotor on. How can I figure out what the problem is? Is there a way to check a rotor to see if it is warped? Could there be another reason I feel the pulsating brakes? By the way, the brake fluid is full.
If the caliper needs to be replaced and I can leave the parking brake disconnected, are there any special instructions my friend should know about before working on this? He does work on a lot of cars and rebuilds cars to sell, so he is pretty knowledgeable. I think the only thing he didn't know about was rotating the piston. I would like to provide him with detailed instructions if necessary.
I have a 2012 Elantra limited. About 2 weeks ago I've started to hear a clicking noise coming from the gearbox when brake pedal is pressed and let go. This only happens when the car is at standstill. I took it in for service today and sales rep said its a normal clicking noise and his sisters car makes same sound. He said its an actuator motor engaging to allow the car to shift when brake is pressed. The thing is, the clicking was never there before or maybe not so loud. So what should I do? Car is still under warranty, should I demand for them to replace the actuating motor? Maybe call Hyundai and complain that they said the noise is normal ?
View 4 Repliesok, just started to use my vag and now im stuck on trying to change my blinkers from 3 to 4 clicks and releasing to parking brake
View 1 RepliesThis morning I drove my car to see my dentist. When I parked I engaged the parking brake as I always do out of habit. However this time when I was done at the dentist and got in my car I tried to disengage the parking brake pedal and it wouldn't release. It kept going lower. Now I think its pretty much floored. I had to leave the car in the parking lot as it started to rain heavily. How to release the brake pedal. ? I think it must just be a stuck lever or gear thats preventing the release mechanism from working. Any pics or have dis-assembled a parking brake pedal on the phaeton before.
View 4 RepliesI am trying to remove the rear rotor of a 2007 Camry, but it appears to be stuck on the parking brake. The parking brake is not engaged, but the pads are firmly pressed against the rotor (rotor was loosen from hub assembly using bolts through the two threaded holes).
I have removed the rubber plug and attempted to turn the star adjuster, but it doesn't seem to move in either direction. Also, the adjuster should rotate away from you to tighten the brake and toward you to loosen, correct?
My buddy has 2005 Ford Ranger, 4.0L V6, manual with 4WD. It cranks fine, shifts through gears, but it will not move. We're thinking something to do with the parking brake, but I don't have much knowledge about brake systems. A cursory inspection showed a cable without much rust, some rust on the rear drum brakes, and around the mounting where the brake cable runs into the brake drum. I can pull downward on the cable about three inches, so it doesn't seem like the cable is pulled too taut. The pressure on the brake pedal feels about normal.
(edit: something sort of important I forgot to mention, which is why I don't think it's the transmission. In neutral, we cannot push the truck. When pushing from the rear, it will rock back and forth a few inches. When pushing from the front, the truck will not budge at all with two guys pushing on it.)
What sorts of tests can we do to pin down where the problem lies? If it is the parking brake, how can we loosen it up enough to get the truck moving to a shop (or at least to the garage where we can get to the brake shoes)?
Ok so this is the problem now, i went to check my fuses and pulled a #20 out to see if the cigarette lighter fuse was blown. Guess what? i start the car and all of a sudden the Electronic Parking brake failure kicked on. I tried to get the car out and now it won't get out of park! FML i heard that you can just unplug the battery for 15 min and that should reset the car but who knows... I got vw roadside coming to see what they can do it might need to get towed though
View 7 RepliesMy brother-in-law has an '04 with ~160K miles that we're potentially interested in picking up from him. It's been sitting for awhile with the parking brake on. When going to try it out today I released the parking brake (it seemed to release okay) but both rear wheels were stuck. I drove it a few feet and the left rear freed up but the right rear would not budge (multiple attempts.) It was dragging on their driveway and I could barely get the car back out of the way.
Looking for (videos, manual, etc.) how the parking brake works? Is there an external adjustment I can reach or some place to try to release the cable? We had an '06 that our daughter now drives but I've never had any issues with rear brakes in 200+K miles on that car.
Hit a puddle-now car is stuck in 3rd gear... with parking brake fault light lit up. How to fix it? it happened on the highway on the way to work at 70mph . so now i either have to drive home with it the rpms at 4k or get it towed. Car is a 2006 passat with 35000 miles.
View 5 RepliesSo I washed my car today.. was wiping it a little and noticed that the right side of front bumper was loose.. then a closer inspection showed that I can lift it! I didn't collide into anything whatsoever, maybe from speed bumps or potholes?
Image Uploaded .....
I noticed the rear parking cable's one end hanging. Not sure how to connect it. Appears a part is missing.
View 7 RepliesI just painted my caliper and now I hear some popping sound when I brake or when I completely stopped. if I bring it to the dealer will they denied the warranty because I painted the caliper?
View 2 RepliesOkay so with my old Accent I had the same Magnaflow exhaust I have now on the Elantra. Sounds identical with one exception; When I'd down shift with my Accent I'd get some popping coming from the exhaust. I get no such sound with my current set-up. Now I know some people don't like it but I do.
So my question is simple... Would removing the resonator (assuming the Elantra's have one) or doing something else to the exhaust give me back my wonderful popping sound?