I have an 06 crew short bed 4x4 238k miles ... It just started out of nowhere pulling from side to side. I got home and as i made the turn onto my street I felt the whole front end shift as I was turning almost like a knot in the steering i popped my head under and saw a greasy gear box everything else looks ok.
View 14 RepliesGot stuck, noticed when in four wheel drive only the front passenger side and rear passenger side was pulling. Is that normal? Or should both fronts be pulling?
2011 f350 dually 4x4 6.7.....
Well about 4 days after my HPOP replacement, the ol Ford is at it again. Apparently, one of my power steering lines has been rubbing on the top of my driver side front shock mount. It let loose in a giant black plume of black smoke and grinding gears as I was pulling into the corner store. Limped her home and inspected it. From what I see, its not a terribly expensive hose and shouldn't be too terrible to replace. One thing after the other [URL] .....
View 3 RepliesI purchased a 2011 350 crew cab lariat 6.7 diesel last week. That night i noticed that the passenger side map light was considerably dimmer than the drive side. Had to go back to the dealership 2 days later anyways to get a second key made. Showed the tech the light and he gave me 2 new bulbs to replace both lights with. Both were great for about a week but i noticed the passenger side has once again become dim....
View 1 RepliesSo after getting home last night and having a lot of trouble backing into the driveway, having a serious loss of power, I take it out today and find that the truck is rocking from side to side as I drive, a bit like a boat in rough water. Further, I wasn't able to get much power out of it, capping about 20mph/30kph. Reversing produced some ugly grinding or scraping noises. The steering wheel swung very quickly back to its neutral position after turning, and I've noticed a strip on the road near the driveway where I apparently spun one of the tires trying to back in. Some quick searching says it could be a wheel bearing, an axle problem or suspension-related.
View 1 RepliesInitially had indications of a leak under the wheel arch on the drivers side.
About 3-4 months back replaced both PS lines and the leak stopped - briefly (maybe a couple a weeks).
Now the leak is back, but what's interesting is I lose more ATF fluid on a single long haul run than I do running round town for 3 weeks. I can't work out where the leak is coming from to identify what else to replace - short of just buying a pump and reservoir and replacing them as I've already done the hoses.
My turbo cooler pipe was hard up against the old PS pipe where it entered the side of the reservoir until I did the replacement hoses. Now I have it out the way but I'm wondering if it's caused some unseen wear or damage.
If I just do the pump to see if that works are the reman units any good out of Autozone or O'reilly's?
I own a 2015 LX570 with just 8000 miles on it. Been having an issue with my steering position. Every time im on a straight road the car seems to be pulling to the left side if my steering wheel is placed exactly to the center. At first i thought it was an alignment issue as i took it several times to the dealer and they just tell me that there is nothing wrong with it and it drives accurately straight until one time a guy from the dealer came and checked it himself with me and realized the issue and told me that its not an alignment issue its something related to the the electrical steering position not being accurate (( that's what he said)). They took it in and made it accurate as they say, to be honest its not really accurate but much better than before until last week when it became worse and like how it was before, pulling hard to the left, its like if i want to drive straight i need to pull the steering wheel slightly to the right.
View 1 RepliesI have a 2000 Corolla CE with 48k miles that I bought 2 months ago. I took it in for an alignment and balance because it was pulling to one side and the steering shakes slightly at 70mph.
The before measurements was this:Left Front:Camber: 0.0Caster: 1.2Toe: 0.17
Right Front:Camber: -0.7Caster: 1.6Toe: 0.28
Front Total Toe: 0.45Steer Ahead: -0.06
Rear Left:Camber: -1.0Toe: 0.50
Rear Right:Camber -0.7Toe:-0.04
Rear Tota
I am having problems with my steering being all over the place. I noticed it at first when braking. It would pull to both sides. At a stop light holding the brakes my steering would randomly pull. I replaced the power steering pump. It didn't fix it. Now just driving it pulls all over. I was thinking steering box?
View 14 RepliesWhat does that mean when there is a little oil in my cold side CAC tube?? It's just a little but it's even found it's way up into the intake elbow. Hopefully nothing too bad.
View 14 RepliesI just had my 14 350 dually in for its 10k mile service. They told me I had a oil leak somewhere on right side of my engine. They cleaned it and put some die in it, told me drive and bring back so they can put uv light on it to see where it's coming from. I haven't had time to take back yet as I just started a new job, but I've put about 900 miles on it and it's definitely got a leak! I crawled underneath today and the oil pan right beside the oil filter is wet with oil. Trying to figure out what I might be looking at.
View 14 RepliesI use motor craft filters on all my fords but I'm considering jumping ship on my 6.7l... Here's why:
Even with a small punch that is just shy of the total length of the filter, I still get a boat load of oil leaking out the side of the filter when I unscrew it. I'm pretty sure the anti drain back valve is still holding oil in the filter mount...which is what it is supposed to do.
2012 King Ranch, Side marker lights on the side view mirrors. How do we remove it or gain access to bulbs!
View 7 RepliesI have a family member that has a stock 2016 6.7 Auto F350 XL DRW that is less than a year old, has 85k on it and is developing an oil leak on the drivers side of the engine. What are the possible culprits and any pictures that I can forward to him of those places.
View 10 RepliesIs there a way to program all four doors to unlock when the truck stops? The driver's side unlocks but the other doors do not. This is annoying, but I can't seem to find anything about how to accomplish the auto unlock...
View 6 Repliesso i cant quite tell where its coming from, but here is a picture. it seems to be coming from just even with the drivers side exhaust manifold towards the back. from what i can see the top valley looks clean. it seems to only leak while its running. and it leaks quite a lot. its close to the bell housing so im guessing a rear main but i don't know. i hope its not!
View 14 RepliesI would like to replace my drivers side window. It has some deep scratches and with the windows tinted it really shows. Been looking for place to buy from but can't seem to find one.
The only one I found was on Amazon but was trying to find one cheaper or with no shipping charge.
Drivers side headlight is very dim or not even working with new bulbs. Occasionally it will come on. High beam light is always very dim until you click high beams then its bright blue
Short?
Bad switch??
Can you replace the passenger side up pipe without pulling the turbo, etc? My bellows blew out. Y-pipe is still ok. I've already deleted the EGR, so what's the best to put back? Go back to the original style or just put in a straight pipe? Where to get one?
View 2 RepliesA couple months back I blew an EGR cooler. My mechanic replaced it and oil cooler, when I got the truck back it was using coolant and on cold days below 35 degrees it wont start without a little shot of ether. I took it back and mechanic found a pinched o ring.T he coolant problem is ok but cold starts not. Now today truck was running fine then as I was pulling out of a stop sign I couldnt get over 40 mph, I pulled over and then tried to go but no throttle response,then died and wouldn't restart .I have no way of scanning, no dash lights came on. I am wondering if this is related another o ring or gasket,hpop ,fuel problem??? just replaced all the injectors and ficm a little over a year ago.where should I start?
View 14 RepliesAfter replacing both heads with remanufactured heads from ford along with new egr and oil cooler a month ago, she still overheats when pulling a load. While normal driving and not towing, no problems. In the last 5,000 miles since work was done and while towing approx. 15,000 lbs (load and trailer weight) she got hot once, slowed down, temp retreated got home - she has not overheated since then pulling 4-5 loads over the next 2,500 miles. Today at about 75 degrees only 4 blocks after picking up a load at about 12,000 lbs she started getting hot again. After I let her cool down and got on the Freeway the temp went down, appears she's not staying cool in the city with a load on. With all the work and new parts I had installed, what the problem might be?
View 12 Replies