My 2008 F250's passenger side mirror will not fold/unfold with the switch. Also the motor continues to run when the switch is moved to fold/unfold the mirrors.
View 4 RepliesI have a 2010 f-250 lariat with a drivers side power fold mirror that does not fold. The part number is 1448007. Do they interchange? My mirror is a Power Fold, heated, extending type.
View 1 RepliesI have the LX570 2010. the left mirror doesn't fold any more. I took it to dealership and he suggested expensive fix for such a small motor rotating the mirror? Can I order the part from somewhere else?
View 1 RepliesI just installed a set of power folding mirrors on my 2008 F350. I noticed that the driver side mirror has a longer travel time than the passenger side. How to fix, or why this is like that? Is it normal? watch the video to see what I mean.
[URL] ....
Swapping the 08 mirrors onto older trucks. Which wire I should splice into in the door sill for the right turn signals?
I have an 08, with the tow mirrors/turn signals integrated. On the passenger side, the turn signal does not work. I'm not getting power at the plug.
I traced the wire colors from the headlight and taillight turn lamps and tried splicing into the same colored wires under the passenger door sill. This didn't work (I did get it to work on park lamps though, just not the turn signal). I can't find wiring diagrams.
I noticed tonight, that my driver's side outside rear view mirror is no longer defrosting. I can't really say when it last worked, we haven't had much bad weather here, and just in the wildest case that it may be relevant, I just recently had my master cylinder replaced under the Ford Recall. Why a mirror would stop defrosting?
View 2 RepliesTwo Issues....
1.My rear dome lights work when manually turned on. They do not come on when the door is opened. However, the front dome lights do.
2.The lights on my side mirrors turn blink when using the turn signal, and when hitting the lock/unlock/remote start buttons. They do not work when driving around with my head lights on.
I'm trying to find the wiring diagram for the power windows in a 96 f150. I've got a set of these that i need to fab a harnes for to install in my 82.
View 12 RepliesI have a new to me 2008 F250 XLT. Neither side on the power mirrors is working. The manual shows fuse number twelve on the passenger side fuse block is the one that controls this circuit. The fuse is good (continuity wise). What I need to know is what color is the wire that feeds power to the switch block on the driver's side door panel. Pulled it out of the door panel and wiring was intact and corrosion free. I need to find out if there is power there or is it an issue between the fuse block and the switch.
View 2 RepliesI've got an 06 F-250 and out of nowhere the drivers side window does not operate. I don't hear the motor operating (or trying to operate.) So I opened the trim piece and removed and reinserted the plug for the two forward switches, no change.
Surprisingly we are expecting more rain in So Cal in the middle of April tonight and I'm wondering how to by pass the switch, to at least get the window in the up position to keep the weather and the natives out.
I have a 2004 f250 I just purchased a complete 2008 dash with steering column, wheel everything. I also installed the 08 door panels. I would love to keep the newer column and wheel. I'm not worried about the wiring. Just need to know the wiring colors or numbers for each truck to match?
View 2 Replies1980 F-250, 351M. Battery tests OK - 500 cold cranking amps. New starter, new starter solenoid. When I turn the key to ignition, small click under the hood on driver's side. Turn to start, the starter solenoid clicks once, but no turnover. After that, all electrical is dead - no lights, no horn, no radio, no clicks. Turn the key to accessory, gauges work, but no radio, etc. Turn the key to ignition, nothing. Tried jumping from another car, and the cables melted.
View 7 RepliesI have a 2003 f250 ext cab LB 6.0l diesel with 260,500 miles. So last week I had rolled both front windows down and hit the road to work 45min trip and so I got a call and rolled them up to talk after the call was over I rolled them down. So when I got to work I rolled them up and at night I try to roll them both down to let out the heat and only my driver side went down so I hit the pass.side switch nothing I hit the driver side for the pass. And the light in the switch for the window on the pass side door went out.and didn't go down.
So now I tried up and you can hear the motor trying to go up but only if you use the pass.side switch the driver side does nothing up..... So I replaced both switches as I though rain and snow and dirt got into them and killed them nothing changed I checked for power to the motor and it has 12.2v on the up and when it switches wires to spin the motor to go down I only get 4-6v on both wires. So I checked the door jams for broken wires nothing and I can use my power prob to roll the window up and down so I think the motor is ok on the window..
Alright so, I've done a lot of research to come across a mirror motor and I found one, problem is I don't have the slightest clue on how to take the morror apart. It attempts to fold then stops. So, I kind of jumped the gun and tried to pop off the main mirror and I cracked it. How to disassemble the mirror.
View 2 RepliesI have a 2000 V6 Passat and last week, when I tried to open the side mirrors from their fold flat position, they would not open. It was cold out (about 20 degrees) and I thought the mirrors might be frozen so I turned on the heated mirrors. They frost was removed from the mirrors, but they still would not open and I manually pushed the mirrors back into their normal location. I can adjust both the driver and passenger mirrors from the inside control knob. I have checked the mirror fuse and its ok. Is there a relay or other fuse that would control the fold flat motor?
View 1 RepliesMy 02 F250 is killing batteries. Also, when I try and lock the doors with the door lock switch, the doors lock then the driver side door almost immediately unlocks.
View 6 RepliesMy driver side does not fold in anymore. I can hear the motor but it doesn't fold.
View 2 RepliesI have a 97 F250 HD. Wiring the rear tail lights. When we bought it the had cut off the wires going to both sides of the rear lighting assemblys and I was wondering what wire went to what i have the left turn signal working just can't seem to get the brake/back up light to work on that side and i can't figure out how to get the right side going either.
View 8 RepliesI am trying to add courtesy lights to the existing reflectors in the front doors of my supercab. I can't find a wiring diagram that shows where to connect the light sockets. 1999 F250 SD...
View 2 RepliesI just bought a hard to start 1990 F250. Per the board, just replaced all 8 glow plugs with Motorcraft. Still wouldn't start (it turns over but will only start if you use either). I attempted to install a new BWD brand (Borg Warner I believe) glow plug connector relay today...I removed the old no problem, but am unsure what wires to plug where....the only connection that I'm sure about is the blue wire that works the WTS feature...it plugs in easily but I don't know if there are other connections that need to be made or not? All the wires run from the posts and into the bottom of the unit.
View 2 RepliesLet me start by saying electrical is something I really have no knowledge of....(never used any kind of an elec meter and don't have one) simple, Pos-grd and fuse, NP. I really don't want to fry something in these expensive new seats w/my normal trial and mostly ERROR!
The 08 (drivers) seat has 4 wires in the input clip.
GRN-RED (heavy gauge)
BLK-PURP (heavy gauge
BLU-RED
BLK-WHT
and my 01 whip out of the floor has a 3 wire setup.
GRN (heavy gauge)
BLK (heavy gauge)
BRN-BLU
I can wire PS side seat from fuse box and ground it NP. It only has a 2 wire set-up in the new seat.