GTI 337/20th Anniversary :: In First Gear Car Pulls Incredibly Hard But Sluggish In Second
Apr 13, 2015
I just recently bought a 337 edition gti and I absolutely love it. But the guy I bought it from says that it was chipped but he doesn't know what brand tune it is. But the problem, like the title suggests, is that in first gear the car pulls incredibly hard but as soon as I shift into second I lose all my momentum and it just feels sluggish.everyone that I've seen on these threads have said that I should be getting the most power I'm second and third gear. Is this tune just not a good one? Could there be something more?
View 7 Replies
Advertisement
What could be the issue at hand here. I just recently bought a 337 edition gti and I absolutely love it. But the guy I bought it from says that it was chipped but he doesn't know what brand tune it is. But the problem, like the title suggests, is that in first gear the car pulls incredibly hard but as soon as I shift into second I lose all my momentum and it just feels sluggish.everyone that I've seen on these threads have said that I should be getting the most power I'm second and third gear. Is this tune just not a good one? Could there be something more?
View 4 Replies
So I've been noticing that my GLi is tough to put into first gear sometimes. I feel almost like I have to jam it in place and hold it there, it doesn't just click in. Could this be the shifter cable ends or the cables themselves? Its weird... its only ever been a problem for 1st gear though.
View 15 Replies
Sometimes (most of the time), when I shift from first to second, its either hard to do or it "pops" into gear. There's not like a grinding gear but it sounds like it is hitting something as it goes into gear. If I go 1st to 2nd while stopped, it goes in nice and smooth. It sort of feels like how you can't shift into 1st while you are moving slowly, you have to push on it a bit and then it finally pops in.
View 8 Replies
It all started after it being cold outside it's hard to shift into second gear when i first start up the car, and then after a couple shifts like that i get a notchy shift. after a while of driving it all disappears.
View 3 Replies
So whenever I try to test my alignment ( which i just had done) by taking my hands off the wheel and applying the brakes the car always pulls to the right,
now I've heard that the GLI's brakes can sometimes ware uneven, could this be the cause of that? Will I need new rotors and pads?
2004 GLI 1.8t w/ 47,000 Miles
View 3 Replies
so i got a set of saw blades of my buddy for nothing. before installing the car drove true and after lowering and putting adopters and saw blades on the passenger side wheel wobbles and pulls to the right its pretty much all over the road and cant for the life of me figure it out. only thing i can think of is axle or wheel bearing but there's no movement in the wheel when i move it side to side. only the right side seems to have this issue.
View 2 Replies
My 20th just hit 107k and in the past couple days I have noticed that my car is somewhat sluggish compared to normal and there is also a VERY audible whine when I take off from a stop.
The same thing happened to my friend's Turbo 300zx when his turbo went out and I think that may be whats happening to mine.
This is the perfect excuse for me to replace my K03 with a more respectable turbo like a K04 hybrid or possibly a BT setup. What I'm wondering is how expensive these options are and how worth it are they. I know you can get away with not upgrading certain things when going BT, but I want to do things right to avoid problems down the road
SO....
I currently have Stage 1 APR software, DG Short shifter, and and itg SRI.
I'm not trying to build a 500hp fwd beast, but what all is considered necessary to run a BT without issues and what would the price be? Again, estimates are totally fine, I can locate parts if i know what to look for
And lastly: What is the general opinion of the ATP Eliminator? I haven't heard much about it and all of my research is fairly inconclusive. I'm just trying to weigh my options.
View 9 Replies
I just installed a neuspeed ram air intake on my gli. I noticed that top end seems a little more sluggish. Is there anything i need to do? I have heard you should disconnect your battery for a few to reset your computer.
View 5 Replies
Driving into work this morning I noticed that my car was a bit sluggish. So in the name of science (mainly curiousity) I decided, that I would try to punch it. Came to find out that my girl is runnin a little sluggish. Turbo was pulling as hard as it normally does, and my gauge was saying that im only hitting 9lbs when usually its around 11lbs. Could this be a sign of my turbo going out and now is time for a k04-22 or is it time to change the springs in my 007?
by the way I just rolled over 113k. had all the services done at 104k
View 5 Replies
My truck decided to have some issues last weekend coming home from a friends house. After being on the road for about an hour the truck shuddered, lost speed and was incredibly sluggish trying to get up the hill. It flashed the CEL and then went out. I was doing about 75 with the cruise on.
After slowing down to about 60 it stopped the shuddering and resumed operations as normal. Until about 20 minutes later when it repeated the above.
The next day I grabbed my reader and found the P0302 and P0306 codes. I cleared the codes and took it for a "test" drive up and down the mountain to see if it would trip the codes again. It didn't flip the codes. I thought I might have been dealing with a "one off" issue and left it alone for a few days.
Two days ago the CEL light came on and stayed on this time. Sure enough P0306. Cylinder 2 did not throw a code this time. After doing some research on here I ordered two new COPs and bought a mechanics stethoscope and some new spark plugs just in case.
The stethoscope confirms that cylinder 6 is having some issues. The COPs came in today so I'll take it apart tomorrow and see what I see. I'll be looking at both the COPs and the plugs to see what may be causing the problem. The "nice" thing about this is that at least it's one of the easier COPs to get to.
Should be a nice day for working on the truck.
View 7 Replies
My subaru pulls very hard to the right, so hard that I can not go any faster than second gear (It feels to un-safe) I hear a like metal on metal kind of noise, almost like a ding or a bell sound. It wobbles very bad also. It feels like my tire is about to fall off! I tried to wiggle or move the tires to see if they would move and they did not (Advise from a mechanically inclined friend) I was driving on a muddy road when it happened, and I bottomed out at least once. When you look under the car you can see exposed metal, it is dirty under their obviously and the metal that we saw was not dirty so maybe something slipped out of place or fell off? The bar that connects to the wheel has a rubber protectant thing against it or covering it and that is where the exposed metal was.
View 2 Replies
I got the car like that. When I take off hard there is a crack somewhere in the front. Then when I stop hard it cracks too. What could it be??? Sometype of bushing??
View 1 Replies
So I did a couple searches and found a couple MK3's with this issue however I did not find anything for the MK4.
The last couple days, we have been over 90 degrees in the afternoon. My black 03 20th 1.8t sits on the side of the road at work in the direct sun from 12:30 (lunch) until 5pm when I get off.
The last 2 days, when I have gone to start it, it cranks and cranks for 5-8 seconds before it starts to catch and finally stumbles to life. Once its running, everything feels fine. If I turn the car off and restart it, it starts fine.
In the mornings in the garage, evenings when its cooler or leaving for lunch before the day has gotten really hot, it starts fine. It only seems to be affected after sitting in the direct afternoon heat for a few hours.
I have read vapor lock, dying crank position sensor, ignition issues, starter etc. I am going to rule out the starter as the car cranks like normal. It simply does not fire.
View 1 Replies
So tonight at 8:30 I started up my car to get ready to leave work. I turned my light switch to activate the headlights and I only saw the amber light on the wall in front of me. I was worried because I need headlights in order to get home. I tried activating the fogs and turning the switch on and off but only my parking lights were working. I turned the car on and off a few times and all of a sudden the headlights finally turned on. I drove around town afterwards to run errands and the headlights were turning on just fine. What would cause this issue and I really don't want it to get to the point where I can't drive my car at night.
View 8 Replies
Driving home from work, I was about 5 minutes from home, got to a light only to not be able to go into 1st. I popped it into 2nd and drove home like that pretty much. Car will let me get into reverse and all other gears.
I can put the shifter towards first but it doesn't fully go in and when I gave it gas it would let me start to creep and then grind a little and pop out.
Heres a pic for your click .....
View 24 Replies
My 20th Ann. Is jerking under acceleration. When I hit the gas pedal slightly hard it starts jerking. Every once in a while the CEL will flash on and off. I changed the spark plugs and coil packs, cleaned the MAF, and now I have no real direction where to go. Maybe it could be a vaccum problem...
View 4 Replies
I just rolled 100k in the 337. Time to do some refreshing. 2 noticeable issues (non-motor related anyway )
1 - sometimes when turning hard left to right, or vice versa, I hear and feel a "cluck", almost like the something is shifting.
2 - I've got a creak from the front (and I think maybe the back too) when I get out of the car. Sometimes I hear it when I slowly go over a bump as well.
3- I think my rear shocks are on the way out.
In the last 15k I replaced both the inner and outer tie rods. That's all I've done to the suspension.
View 7 Replies
My gli has some trouble sometimes starting when parked upwards on a hill, I am thinking its the fuel pump..?
View 6 Replies
I have a problem with my 20th anniversary gti. My 1st and 2nd gear won't work. Every other gear works fine, the gears never grind before or any unusually noise. I was pulling off my driveway and they just stop working. Even when the car it's on I can move my shifter to 1st and 2nd without the clutch and nothing happens.
View 3 Replies
So I get in the car to move my car this morning and I can't get the car into 1st gear. It turns out I can't get the car into reverse, 1st gear, or even 3rd gear. It feels like something is blocking me from even approaching those gears, however the others (2,4,5,&6) seem to be fine.
View 14 Replies
