Golf IV R32 :: Rear Sway Make Noise When Go Over Road Bumps


Jan 4, 2010

Rear sway bar make noise when you go over bumps in the road?

View 24 Replies

Advertisement

Golf V R32 :: Clunking Noise When Going Over Bumps And Humps In The Road - Sub Frame Bolts?

Do we suffer from this clunking noise as well? I know I have rattles and things that make noise over bumps and humps in the road. But is this what I hear?

[URL] .....

View 5 Replies

Golf IV R32 :: Rear Sway Bar Installed Correctly But Makes Noise

So after about 3k on my rear sway I checked everything to make sure its tight. All is tight, but i notice it moves very little but its enough to make noise and drive me nuts. hard to explain but if you see the h&r bar it has very small allen head screws inside a ring that keep the bar in place where it bolts to the frame there is only a 1/16 of an inch or so of play and its driving me nuts.

View 14 Replies

Golf V R32 :: Rear Sway Installed And Now Knocking Noise Coming From Passenger Side

I installed my sway on saturday and it went smoothly. The bushings were greased up, bolts were torqued to spec, nothing was rubbing or touching in anyway. Now I am getting a knocked noise coming from the rear passenger side. after driving it for a day or so i check under the car to make sure nothing loosened up and everything was just how it was when i installed it. What the issue could be, but the noise is really annoying.

View 4 Replies

Sonata NF (2006-10) :: Suspension Doesn't Make Any Noise Over Small Bumps

I seem to be having a front end noise that only started up a few weeks ago.. The suspension doesn't make any noise over small bumps, only for larger ones. It makes the most noise when pulling into a drive way or something with a steeper grade from a flat street.

The noise I am experiencing sounds more like a scraping. It's not the power steering pump and it's not the brakes. Also, nothing is under the car that would cause this type of noise. It doesn't click or sound like a CV joint, I know what that sounds like. It also has no affect on any other performance of the car. I have tried jumping/pushing down on the car and it cannot seemed to be re-produced. Where I can start looking?

View 6 Replies

Golf V R32 :: Loud Clunking Noise In Rear Happens Over Bumps

There is a clunking noise coming from the rear of the car. Not a metal on metal sound. Sounds like its more on the passengers side. I replaced the swaybar linkage ends since they were a little loose and thought it was that. Nope...I have H&R coilovers, they are about 5 years old. Can't imagine they be shot this soon. Had someone drive my car while i was behind the R and the rear wheels aren't dancing at all, a common sign of a blown shock. Push down on the car, shocks still respond like they did from day one. I've put the car up on a lift, both sitting and wheels dangling. With the wheels dangling, I grabbed onto the shocks to see if there was any play in the upper shock mounts, solid. Looked under the whole car for loose plastic covers. Can not see anything loose. I made sure everything inside the hatch, including the battery is sitting snug.

The clunk happens over bumps, with or without the brakes on and is loud enough that if the radio is on, it can still be heard.

View 3 Replies

Golf IV R32 :: Bad Clunking Noise When Going Over Bumps - Rear Springs Collapsed?

I am experiencing a bad clunking noise when going over bumps. Its comming from the passenger rear and I am assuming the springs collapsed. How can i tell for sure? The car is sitting a little lower on the corner. Is it bad to drive the car with the spring in this condition?

View 8 Replies

Golf IV R32 :: Creaks And Rattles While Going Over Bumps In The Road

So I finally decided to look into all the little creaks and rattles that the R makes while going over bumps in the road.

-Wrapped the latches of the rear seats in electrical tape, and put adhesive velcro (soft side) on the back of the seats where it meets plastic.

-Took apart the center console and put adhesive felt around the areas where plastic makes contact with other plastic

-Put adhesive felt inside the aluminum trim & Monsoon radio to stop shaking

So all those little fixes eliminated most of the rattling sounds in the car. All that I need to look into are the driver and passenger doors to secure whatever is rattling/shaking inside those panels. Something to do this coming week. I normally would leave these noises alone, but damn they drive me crazy like it's a form of Chinese water torture. I hope to have no more rattles in the following week.

View 10 Replies

Golf V R32 :: Knocking Noise From The Rear Over Uneven Road Surfaces

I took the R in for a passenger side seat issue (recliner not working), and while I was there I had them look into a light knocking noise I was experiencing.

The noise would happen most noticeably at low speeds, over uneven road surfaces...but not over things like speed bumps. I checked under the car, checked the hatch, made sure the spare/tools were secure, and nothing worked.

VW figured out that the noise was coming from the lower rubber rear spring plate, part (1K0-512-297-D). Not sure if it was one side or both, but they replaced both.

All better now, no more noise! Just wanted to make a thread for those of you who like to hunt down and fix noises.

View 4 Replies

Ford Super Duty (1999-2016) :: F350 - Rear Suspension Clunk Over Bumps / Heaves In The Road

I have a 2005 king ranch and have a clunk coming from the back over bumps/heaves in the road. It doesn't happen all the time but often enough. I just replaced the shocks, that worked a little but didn't solve the problem. Now thinking rear sway bar end links? Anything I can check/inspect?

View 1 Replies

Sonata NF (2006-10) :: Front Noise Over Broken Road Or Bumps

this noise start like 4 month ago. I have taken the car to two mechanics and they weren't able to find where the noise is coming from. i suppose that the problem isnt really that tricky.

is kind hard to describe the nature of the sound.

mostly happen when i go over broken road or bumps where the suspension have to move up and down a little but very quickly

Hyundai Sonata 2006 Front susp noise

View 1 Replies

Accent RB (2012+) :: Road Noise / Can Hear Bumps On The Tire

My accent 1.4L gl at noise on road condition and especially rough road.. I can hear the bumps on the tire LOUDLY.. do i have to change my tires? or spring?

View 16 Replies

Ford 6.7L Power Stroke Diesel :: Door Panel Vibration When Go Over Some Bumps In The Road Or Even Down A Gravel Road

I've got a 2012 F250 SD and when i go over some bumps in the road or even down a gravel road, the door panel on the driver side vibrates and it's noisy. Is there any way to pull the panel and add some foam padding or something to stop this? I can see the panel vibrate or heck, maybe it the whole door.

View 10 Replies

Prius (2010-12) :: Brake Calipers Noise When Hitting Road Bumps

So my several month old Prius II has developed a metal on metal sound when I'm hitting various road bumps.. it's a "clack" sound emanating from my wheel well area that is heard when the windows are down.. I've taken it in twice and the first time they couldn't figure it out... second time they said they drove mine and a brand new Prius which also has the same sound and said it was the brake calipers. Funny thing is, I never heard this noise until after about 2k miles on my car.. They also would NOT disable my reverse beep sound or seat belt beep saying it was a safety feature and shouldn't be disabled.

View 19 Replies

Golf V R32 :: Installing H&R Rear Sway?

So tonight I got the chance to install my H&R Rear sway bar on my car...let me start off by saying I was lucky enough to have a lift, air tools, all the correct tools, etc...now the frustrating part...i opened the box saw the bar and new bushings, figured this should be 100% straight forward 10 min job... the old bar came out in about 3 minutes...then I got the new bushings on the H&R Bar and went to put the factory brackets on...they wouldn't fit even close. Luckily I had a press so I pressed them on. Once I got the bar in the car I got the two top bolts started and could not for the life of me get the bottom two...its like they were 1/4in to low... Was I missing parts from H&R? also the factory caps/brackets seemed to sit off to the side of the new H&R bushings and there was no way to line them up straight, but I finally got everything on there..

View 18 Replies

Passat (B7) :: Driver Door Making Rattling Noise When Going Over Bumps / Rough Road

Whenever I go over bumps or a rough piece of road there is a faint rattle coming from the drivers door. It just started doing it about a week ago and its driving me crazy . I am thinking door seal? I've called the dealer and they told me to come in to check it out.

View 7 Replies

Golf IV R32 :: Rear Sway Bar Bushings Squeak?

I'm pretty certain that my 22mm neuspeed sway bar bushings are shot. they squeak like crazy and when I looked at them to grease them up it looked like they had space, oh and they knock like crazy. Any better source or place to check locally? Would Napa carry something like this? and is Poly my only option? would a rubber bushing wear quicker?

View 3 Replies

Ford - Focus :: 2003 - Rattle Noise From Front End When Going Over Very Small Bumps / Cracks In The Road

The roads here in Maine this winter were especially awful with potholes and bumps. My '03 Ford Focus Wagon has recently developed a noise that I can't diagnose. The noise can be best described as a "rattle" from the front end when going over very small bumps/cracks in the road. It almost sounds like loose shocks. They are the original shocks and have 130k miles on them.

Big bumps are not a problem. Car does not bottom out, sway upon braking, or bounce when I put my weight on it and release. Several years ago I had a "creaking" from the front end and my mechanic replaced some bushings which fixed the problem. I originally thought this was the same, but it doesn't sound like that - worried it could be the struts but I want to diagnose it a little better before I bring it to a mechanic and just say that I have a front end noise...

View 1 Replies

Ford Super Duty (1999-2016) :: Noise And Rattling When Going Over Bumps Or Rough Road

All the body bushings have dry rotted away on my 08 Superduty. Are these hard to replace?

I am starting to hear and feel more road noise and rattling when going over bumps or a rough road. U think they would have used polyurethane bushings instead of rubber.

View 14 Replies

Lexus RX 2010-15 :: Squeaking Noise From Dashboard When Driving Over Rough Road Surfaces And Speed Bumps

I have an RX 450H and noticed that there is a squeaking sound coming from the dashboard. I looked at other posts where people were experiencing similar issues and noticed one post where someone had a GS 450H and fixed this issue by adding felt between the dashboard and the windscreen.

I would like to know whether this method works 100% and whether I can apply this method to the RX 450H. The noise becomes worse when it is cold and especially when the car is being driven over rough road surfaces and speed bumps.

View 5 Replies

Golf VI R :: After Installation Of Rear Sway AFS Stuck / Lights Pointing Down

So as the title states, rear sway install, no issues (so I thought ) go to test drive the car afterward, and the headlights go through the normal sweep, but, they don't come up and level out, instead, they are pointing 10ft in front of the car.

The test drive was otherwise flawless, the R responds well to swaybars, my Mk6 TDi did as well, I just have the rear H&R bar on the softer/street setting for now, but it makes a notable difference just on its own in the soft setting, I'm pleased.

Back to the issue now at hand, I researched and so far came up with there is a sensor on the drivers side LCA on the rear of the arm, and one on the rear subframe that has a push rod type arm (looks like a servo) attached to it and a bracket on the subframe, Is this correct? The sensor in the rear is intact, plugged in, and I traced the wire back to the wheel well and there is no evidence of a ground, pulled or severed wire. I have no scanning equipment and am leery of going to the dealer and letting them plug into the ECM for anything now that I am tuned, not really for warranty, more for I don't want to risk anything being corrupted or altered.

View 3 Replies





Copyrights 2005-15 www.bigresource.org, All rights reserved