Golf V R32 :: Driver Side High Beam Always On
May 13, 2014
I have been trying to sort this issue for a while now to no avail. I have had my MKV .:R since February and this problem has existed since I bought it. If the headlight switch is in the "off" position, my lights are off. That is good.
So far, whenever the switch is switched to "auto," the light are ALWAYS on. That doesn't bother me at all, but it seems wrong. Obviously, when it is in the "on: position, they're also on.
Now the problem I have encountered is whenever the lights are on (ie not in the "off" position) the driver's side light is always on the "high" position, even if my brights are not flicked on. The passenger light switches from low to high according to whether I have the brights flicked on or off.
View 8 Replies
Advertisement
I have a strange problem. My driver side low beam dont work and my right side high beam dont work. Try different relay (switching), check fuse, bulb etc. Also in my dashboard the right green arrow for the flasher always still on(solid).
If I activate (with the control arm) the right turn flasher the flasher light blink in the dash board and my outside flasher bulb flash but my left high beam also blinking in the same time!
View 3 Replies
My 2006 Prius (Model NHW20) has a strange headlight problem. On the passenger side, the high beam light is out but the regular headlight works.
On the driver side, the high beam is working but the regular headlight is out.
I don't think it's the fuses but I'm not sure. No amount of interchanging the following fuses changes anything about the issue:
1. 10A H-LP HI RH
2. 10A H-LP HI LH
3. 15A H-LP LO RH
4. 15A H-LP LO LH
View 3 Replies
Just bought a 2006 with 80k miles and HID headlights on it and noticed while parking in the garage last night that only the passenger side high beams work. Upon closer inspection and having my fiance flip the beams on and off I could see that the reflector on the drivers side didn't move at all.
This is after i just had a brand new driver side lens, bulb and ballast installed as when i bought it the headlight had a lot of condensation built up inside it. So I'm not really sure if the highbeam was working before this was all replaced because the bulb went out right after i bought it.
View 5 Replies
So i just purchased a 2008 R32 "united grey" US modelit has a clean 65,000 miles.... upon driving it home i flicked on the brights after about 10 seconds they automatically dimmed and the bulb indicator light popped on i researched and was confused about so many combated responses, and gathered that the brights operated off the same bulb as the low beams which both work "HID'S OEM" and that the two inside useless lights are flash to pass and can be enabled using VAG COM.....
But back to the task at hand i lined up to a wall and put my brights on and the passenger doesn't change in intensity or even do anything but stay on low beam my drivers side works fine! i checked fuses and saw none that looked blown but also didn't know if the brights were even on a separate fuse nor what " numeric position" it would be in?
Do I just need a new OEM bulb? new fuse? I haven't tried swapping the bulbs yet from drivers to passenger vise veresa... nor do i even know for sure if high beams work off of the same light, or if there is a mysterious spot for the highbeam bulb i not see
View 6 Replies
This morning a dash light informed me a headlight bulb was out. It was my DTR light on the passenger side.
I purchased Sylvania H7 high intensity, installed it and it failed to work properly. Daytime light on only drivers side works.
High Beam on , both lights works.
I checked my manual and it said to check fuse in the 5 slot on the driver side dash/door panel and there actually is no fuse in there. I checked the driver side and there was no fuse there either.
I replaced my driver side bulb last year and it took 5 mins....i am already 4 hours into this!
View 4 Replies
When I use the high beams on my GTI with LP, the pattern goes very high with an oval/round top. The road is lit up fine, but I've never seen a pattern go up so high. Is this normal or a problem.
View 15 Replies
My right sided high beam stopped working and my dash "bulb" warning light is on. Low beams working normally and still swivel around on startup and when turning. Is there actually a separate bulb for the high beams? I ask because when you flick on the high beams I hear mechanical movement inside the headlight housing, making me think high beams may be just a redirecting of the light. Having computer issues so haven't tried VAGcom yet. Also haven't checked fuses...
View 9 Replies
Any tips for replacing the passenger side high beam? I can get my hand in there by there is no way to turn the bulb. Any easy tool to grip and turn the bulb?
View 5 Replies
My 2006 Prius' driver side (not HID) lowbeam was out, so I bought a replacement bulb. I followed usbseawolf2000's excellent directions on changing a headlamp, but after putting the new bulb in and testing, the lowbeam still does not work.
View 9 Replies
My driver side low beam is out. I replaced the bulb and it is still out. I got a second new bulb, replaced it, and low beam still does not work. The high beam works, the turn signal, and fog lamps work, just not the low beam. the passenger side is fine. I checked the fuses and they are not burned out.
View 1 Replies
Drivers side low beam not working. The bulb is fine saying something was tapped in, therefore, can't warranty headlight. Guy said the light gets power just light won't work. Can Vagcom fix this? Dealer wants $125 for inspection plus another $676 for parts and labor.
View 19 Replies
We just bought our first Prius about six weeks ago. We purchased a used 2008 model with 83,000 miles. So far we have loved the vehicle. Tonight as we were driving home we noticed that the left headlight was out. I ran some quick tests and determined that the left high beam, low beam, and side marker light were all unresponsive. The left blinker is working fine. I checked the fuses for the left lamp (separate fuses for low and high beam) and all seem to be in good working order. Everything on the right side of the car is working fine.
View 9 Replies
I have a 2005 Yukon Denali XL. The low beam headlight on the driver's side will not work. I replaced the bulb. Still won't come on. We had just driven the truck up the Dalton highway (The rough road seen on Ice Road Truckers).The passenger side low beam works fine, and all the other lights work fine.
View 1 Replies
My driver side lower beam (projector) will go out after a couple minutes when its turned on. If I flip the switch to off and then on, it turns back on again. Is this a sign of it going out? I am assuming i have the HID version.
View 9 Replies
I currently have a 2011 Sonata. The drivers side low beam head light does not work. I thought it was the bulb, so I went and purchased a H7 bulb. When I replaced it with a new bulb it still did not work. The high beam works fine. So I thought I bought a bad bulb. I then tried the bulb i bought on the passenger side and low and behold the low beam worked. I then put my old bulb that I thought was bad on the passenger side and it worked.
I swapped every light bulb on the drivers side (the new one and my old ones I already had), and none of the low beams would work. I course I did move the switch to the correct position inside the card and no go. The DayTime running lights work fine, I just cant get the low beam to work on the drivers side.
I tried checking the fuses to see if i had a blown fuse and no luck. I could not find a blown fuse. Is there a fuse somewhere for the low beam light, if so I cannot find it anywhere in any manual that I have searched. I have also heard that it may be the Body Control Module.
View 6 Replies
I had a low beam bulb go out a month ago on the driver side. I bought some silvania silverstars to install on both sides. The drivers side went fine but as I installed the passenger side the inside reflector housing came loose, apparently popping off some spring clips inside the headlight housing. The passenger side headlight assembly now pointed towards the ground 10 feet in front of the car... I tried to adjust the screws to bring the light pattern back up. No joy.
Anyway I messed and messed trying to get the reflector housing to fit back on the spring clips. I ended up having to pull the bumper apart and the whole front side of the car to totally remove the headlight assembly. Once I got it out I found these little ball/socket spring clips and was able to put the assembly back together.
Now my issue is I have lost track of the adjustment screws and where the headlights should point. Any formula such as, "park your car 10ft from the garage door on the flat level. The low beam should be 30 inches off the ground on the bottom and the 40 inches at the top. The beam should be 50 inches from the center line of the car" Something like that so that I can get my headlights back to factory settings.
View 4 Replies
I need to replace the low beam headlight on the drivers side. Any quick way to do this, and how much and what type is the bulb?
View 3 Replies
My driver side low beam headlight keeps blowing out. I have changed bulb 4 times so far. Why this is happening?
View 13 Replies
I have a 2012 gti with oem bi-xenon head lights. What code or setting do you use on vagcom to bring on the fog lights when I turn on highbeam?
View 3 Replies
My car is fully stock, with all options available to me (cold weather package not available here). The low-beam triple-LED headlights are aimed way too low compared to all my previous cars, and where they should be. BUT high-beam is aimed properly. So if I adjust the low-beams up, my high-beams might end up lighting up the trees, not the road.
If adjust the headlights up on a fully stock car (not lowered at the front)? Are the high beams still lighting up the road fine? And if you can be specific as the number of turns on the screwdriver, it'd be good too to have an initial adjustment reference.
View 3 Replies
