Passat (B6) :: Front Tires Are Making Noise - Transmission Fail To Engage Into Gear 3
Jul 4, 2007
My grandma had purchased an almost brand new B6 Passat with the 4-motion VR6 all leather interior with about 8k on the odometer. Recently she has had some problems with it and has asked me what is going on, My dad has an Audi Allroad, my mom has a 01 A4 event and I have a 04 GLI so we know some stuff about the cars but these problems are eluding me and I was going to look for some counseling. First, her front tires are making this horrible sound, she says it sounds like a Mack truck and it gets worse as you go faster. I'm thinking its the tires but why would it be like that only after 8k? The second problem is her transmission, she has had the transmission fail to engage into gear 3 times, where it takes about 2-10 seconds before it engages. Now the car has about 10k on it. [URL]....
View 11 Replies
Advertisement
I have taken my 2004 Pruis into the Toyota dealership and have been told that there is nothing wrong with my car and it is safe to drive. Here is what is happening.
Sometimes when I start my car and put the car into gear, which you are not supposed to be able to do without your foot on the brake, the car will start rolling before I take my foot off of the brake. I am on level ground when this happens, and I am positive I have my foot firmly on the brake. My first inclination is to push harder on the brake, which does nothing. If I take my foot off of the brake and then reapply it, then the brakes will work and the car will stop.
After this happened a few times, I started paying more careful attention. Whenever this happens, the ABS light is on. When I take my foot off of the brake, the ABS light goes off, and as I said, the brakes work normally.
Furthermore, this only happens if I have been sitting in my parked car for a few minutes with the engine off. It does not happen if I am getting into the car after being away for a few minutes, it only happens if I sit in the car for a few minutes and then turn the car back on to go somewhere.
This is, of course, not only irritating, but unsafe. It can be easy, if you are distracted, to have the car roll into someone or something if you are looking away, thinking that even though you put the car into gear, it will not go anywhere because it is not supposed to go anywhere, you have your foot on the brake!!!!
View 5 Replies
I have taken my 2004 Pruis into the Toyota dealership and have been told that there is nothing wrong with my car and it is safe to drive. Here is what is happening.
Sometimes when I start my car and put the car into gear, which you are not supposed to be able to do without your foot on the brake, the car will start rolling before I take my foot off of the brake. I am on level ground when this happens, and I am positive I have my foot firmly on the brake. My first inclination is to push harder on the brake, which does nothing. If I take my foot off of the brake and then reapply it, then the brakes will work and the car will stop.
After this happened a few times, I started paying more careful attention. Whenever this happens, the ABS light is on. When I take my foot off of the brake, the ABS light goes off, and as I said, the brakes work normally.
Furthermore, this only happens if I have been sitting in my parked car for a few minutes with the engine off. It does not happen if I am getting into the car after being away for a few minutes, it only happens if I sit in the car for a few minutes and then turn the car back on to go somewhere.
This is, of course, not only irritating, but unsafe. It can be easy, if you are distracted, to have the car roll into someone or something if you are looking away, thinking that even though you put the car into gear, it will not go anywhere because it is not supposed to go anywhere, you have your foot on the brake!!!!
View 12 Replies
I have a 2007 Honda CRV with about 85k miles. Always had a lot of road noise, but recently my husband and dad road with me and were very concerned about a "womp, womp" noise in the tires. It matches the revolution of the tires, so when I get going fast I don't hear it. I had new tires put on, rotated front to back, and balanced. My husband thinks it's worse. Also had new front brakes (steering wheel shook when I braked at high speeds). I'm at a loss and have spent quite a bit already. Could this be wheel bearings? Tie rod ends? It sounds like the tires but it's definitely not.
View 19 Replies
When you put trans in reverse makes whine noise no reverse. The forward gears are fine. Could this be a solenoid problem?
View 1 Replies
Just put the 6.0 back in the truck, engine working good now. Went to take it for a test drive and the transmission will not engage in any gear. I don't have any codes coming up on my scanner. Can not figure out why the transmission is not working from engine R&R.
- Fluid level is good
- Swapped wiring harness from my other truck and still nothing
View 3 Replies
Need new tires for my R32. I am not satisfied with the OEM Dunlop tires, will not buy them again. They make too much noise!
View 24 Replies
My clutch peddle made a slight "snap" sound last night and now it is very difficult to get the car to engage in a gear while sitting still, while moving it does ok, but not nearly as smooth as it should be. The other odd occurrence is that while the motor is running and the car is not moving, you can't shift any gears at all, but as soon as you cut the motor, all 5 gears and reverse are easily accessible. Why the sound at the peddle and the trouble in the gear shift mechanism? I am only an advanced beginner with car repair, but I think think this is really bad... 2007 Honda Accord Manual Transmission
View 8 Replies
I'm in a bit of a bind. I was very low on gas drove my car on fumes (mistake, yes) back to my place. Today, it will not start. I dumped 3/4 of a gallon into the tank, and still no start.
The ignition will try, fail to engage the engine, and then emit rapid clicks as the interior light flashes. The battery works, as all the cabin lights turn on.
I really don't want to the fuel pump to be broken, so I'm trying to eliminate possibilities before that. Is there something wrong with the ignition, perhaps? What is the clicking after the attempted "heaves" of the ignition switch?
View 3 Replies
I'll start this off with a few months ago, I went on a trip and along the way noticed that the car wouldn't get into gear. This happened for a few moments, and solved itself.
Fast forward to a few days ago:
So, my Golf MK4 AUTO 1.6L transmission doesn't want to shift into 4th, sometimes.
One and two are good, but sometimes I get quite a lag in between disengaging 2nd and getting 3rd also.
Furthermore, sometimes I get 4th 'semi' engaging, where the engine is revving too much to be fully in gear, but I get power to the wheels and accelerate (slowly).
I did a VAGCOM scan and got the old:
00652 - Gear Monitoring
27-10 - Implausible Signal - Intermittent
I also had a CEL on my dash, which I cleared with the VAGCOM. This removed the light, but of course the error still persists.
I've been reading around, and some people have said the issue is the TCM, but some people have had similar problems and a TCM replacement has not fixed this.
(Just btw, my TCM model is 01M927733LK).
And some people have had good results with solenoid replacements. So, I was thinking of doing a ATF flush, just because it was recommend on some posts, but won't necessarily fix the problem.
Contacted a garage to do this for me (never flushed automatic tranny before) and mentioned the VAGCOM codes, and he said this is a slip code.
So, now I'm not really sure what to do to fix it. Are the solenoids interchangeable? Am I able to switch two gears' solenoids to see if it moves the issue to another gear, proving its the solenoid?
View 1 Replies
This is the first car I've ever owned with an automatic transmission. When the car is stopped and in gear, I can feel a slight vibration and hear some accompanying noise. Shifting to neutral gets rid of the noise and vibration. Is this normal? Car has 9500 miles.
View 2 Replies
The A/C in my truck stopped working last year, and this year I intend to fix it. I believe the problem is with the compressor clutch because it was making noise as it would engage or disengage. It was making this noise for a good year or so, and then one day the noise stopped and I have no A/C. So I am only assuming its the clutch.
View 4 Replies
My car has 130k miles and has recently developed a worrying noise. It makes an extra whirring sound, like another set of gears spinning, but I don't think I would describe it as a grinding noise. I live in VT and I thought maybe it was my (studless) snow tires making more noise in the warm weather because I noticed it about a month and a half ago when it warmed up. Now that I have my all season tires on, it's still making the noise. The tire guys didn't notice anything wrong when the swap happened (but they only do tires there and I didn't ask them to look for anything).
As far as I can tell it is dependent on wheel speed, not engine speed. It starts at about 20-25mph and gets louder the faster I go. At about 65 the normal road noise is louder than the new noise. If I turn the wheel to the right to any degree the noise goes away. I can't tell if it is completely gone, but it seems like it is. There is no real change if I turn the wheel to the left, though it might get slightly worse. When the noise is going I can feel a vibration in the floorboard that matches the sound. The sound seems like it is coming from in front of me, but I can't really tell if it is left, right, or center. As far as I can tell that is the only new noise, no clicking/griding when I turn the wheel etc.
I'm taking it in for normal 130k maintenance in a week....
View 3 Replies
I have a 2001 m5r2 ford f-150 standard transmission. i have replaced the slave cyl., the entire clutch assy., the master cyl. pilot bearing. the trans. will engage all five gears plus reverse while truck is off but will not engage a gear while running. i have bled and bled and bled and still will not engage.
View 1 Replies
Just curious about the tires that came from the factory to be noisy and loud when at highway speeds? I only have 1500 miles on the tires, will getting more miles on the tires say after a few 1000 miles or so? Also what is quieter option without sacrificing mpg?
View 19 Replies
The other day my transmission was driving fine, until I stopped to let someone out. When I tried to throw it back into gear, it wouldn't engage at all, just had a slight grind almost like the sound of a chain coming off a bike (so I pushed back in the clutch and parked it). I haven't been having any issues with it nor have I been driving it hard.
View 2 Replies
Our 2002 Elantra (automatic, 57000k) seems to have a blown transmission. A few days ago, it sounded like the car was "whining" and then it was having difficult time engaging next gear and eventually check engine came on and the car stalled. Firestone said it's a transmission problem.
We've had the car for less than 10 years so technically this should be covered under their powertrain warranty but I have a strong suspicion that the dealership will find a reason to not honor the warranty. It's still below 60k miles so we really didn't have to replace transmission oil.
View 5 Replies
I have a problem with automatic tiptronic transmission my golf MK4 TDI 1.9 2001, it dosent engage on 4th gear when i am driving, the codes that I received for this foults:
01316 - ABS CONTROL MODULE
49-10 No communication- Intermittent
00652 - Gear monitoring
27-10 - Implausible Signal - Intermittent
View 3 Replies
The problem started with a front seal leak a few months ago which I had no choice but to continue driving with because of low funds. I don't drive much so a couple of quarts of ATF was usually enough to get me out and about for what little driving I had to do. I know.. a front seal is cheap, but I'm partially disabled and unable to work on anything that is not under the hood.
I finally scraped up enough money to hire a friend to replace the seal, but he had a life crisis before completing the work, so I had to get another friend to reinstall the trany... still had the leak, but I could get around by adding ATF as before.
So we tried again... dropped everything and put another new seal on. This stopped the leak, but we got some grinding/squealing noises and could not get the trany to engage any gear.
From reading forum posts and other sources, we decided to replace the TC which we just completed this evening. We got some more of the grinding / squealing noise like before, except that it only occurred the first time we tried cranking the engine, the 2nd time we got no noises, but again no gears engaging.
What to check/replace next assuming there is something we can look at other than a total trany rebuild or replacement. I personally find it hard to believe we could have gone from a tolerably functional trany to scrap metal just replacing a seal and the TC. Its gotta be something simple we overlooked !!
View 9 Replies
Tomorrow I'm taking my car in to have them look at my transmission. I started noticing that whenever I put the car in first, it almost feels like the front tires are skipping off the ground. It does the same thing when I put it in second. At first, I thought it might have been caused by my 18" rims, so I switched over to the stock wheels. Same crap.
View 12 Replies
I have an 05 F 250 super duty with the Triton in it. When I shift either into overdrive or reverse the transmission hesitates (does not go into either gear for about 5 to 10 seconds). After that it engages and it's fine. It does not appear to be slipping or acting up regardless of temperature or speed. Sometimes it will sort of engage and than bang into gear solid. I do not have any check engine lights. Not sure if the PCM has any codes. So I'm trying to figure out if I need to have a complete rebuild or if I have a valve / solenoid body problem Where do I start?
View 4 Replies
