Sonata I45 (YF - 2011+) :: One Brake Light Goes Out When Brakes Applied?
Sep 7, 2015
So I was told I had a brake light out? Went and bought new bulb and replaced. Turn on headlights and the single filament lights. so when brakes are applied the second filament should light up that give the brighter affect.
Well when brakes applied the bulb goes out completely? Take foot off brake and the single filament comes back on. The other tail light operates as it should. Even used bulb from working tail light with same results.
View 12 Replies
Advertisement
Car started fine but stalled on first brake application with the skid-control light illuminated, restarted fine but stalled again on next brake application (skid-control light stayed on). Decided to head for the dealer which was only a few blocks away, drove there knowing that it may stall when brakes were applied (engine would start, idle and operate when driving but the problem would only occur on brake application.... approx when the transmission would down shift to third or second gear). My last stop before turning into the dealer's parking lot, the engine quit and refused to restart.... finally came back to life after about 5mins and was able to complete my somewhat dangerous trip (whole journey was on very quiet back streets). At first I thought it could be related to the infamous brake switch but the service rep informed me that they couldn't communicate with any control module with the scan tool. Now I sit and wait, hopefully they will call with some good news soon.
View 9 Replies
Right this clicking noise is really annoying me now, every time AFTER i brake i hear this click, the faster i stop the louder the click is, also when I am in neutral and suddenly rev its clicks sometimes but rarely, I am thinking it could be a loose exhaust somewhere? Its definitely coming from under my foot area. When I brake cornering it clicks too. Checked my control arms and everything, that's not rattling at all? Need to get rid of this click sound!!
View 3 Replies
The driver side brake light does not come on when you apply the breaks but the light comes on when you turn them on.
View 2 Replies
I've had my 2011 Prius II for two months, and I love it. One little thing bugs me, however. I have noticed that sometimes when I apply the brakes, the car lurches forward a little bit. But I keep the brake pedal on, and the car does stop. Is there something wrong with my brakes, or is this something that has to do with the regenerative braking?
View 19 Replies
My car is a 2011 BMW 328i Coupe, currently at 24K mi. Recently i found my cars brake pedal get sticky after Ive applied the brakes from time to time. But nothing server. My routine schedule maintenance will be coming up soon, so i am just wondering what could be the probable cause. Could it be the brake fluid?
View 6 Replies
Sometimes when I stop at a light about 5 seconds after I come to a complete stop, I'll feel a bump in my transmission likes its trying to lunge forward. Today I started my car and put it in drive and when I did so with the brake applied, it was rhythmically bumping once every 2 second or so, almost like a heartbeat. It did it about 15 times and I shut my car off, started back up and it hasn't done it since. I know the first issue is somewhat common but the second one where it kept doing it was really weird. It has about 35k miles and is already on its second tranny(per car fax changed at 2k).
View 5 Replies
I have 2008 Hyundai Sonata. I hear some noise from front wheels when i turn to right or left with breaks applied. There is no any noise when turning without break. the cv joint has been replaced but no any result. Still there is noise.
View 8 Replies
A couple of months ago the front driver side of my Sonata started creaking whenever I applied the break. I took it to a local mechanic as well as Hyundai service and after a couple of thousand dollars, it still makes the noise . Both upper and bottom control arms were changed, rotors, pads, brakes, bearings, strut mount, and some other minor stuff that I can't recall...its loud and ANNOYING....
View 3 Replies
So on our trip up here I experienced a strange problem. Normally when I apply my brakes my trailer brakes kick in via the controller. This time when I apply the brakes I'm only getting my truck brakes. I can still use the brake controller manually to slow down but it's worrying. What is going on.
View 7 Replies
I bought a brand new 2010 Sonata in April 2010. So far I only have 2500 miles on it. The problems I am having are:
1. When I apply the brakes, there is some vibrating sounds coming...
2. The passenger side front tire does not hold air more than 25-26 psi.. If I raise it to 34 or even 32 psi, it drops down to 26 psi within a week and then stops leaking...
View 9 Replies
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
View 3 Replies
I recently bought a 2007 Sonata V6, and the brakes pulsate (when applied) at highway speeds, so I am looking to replace the front rotors & pads. I have been told that the OEM rotors/pads aren't great & that as a result many owners have a brake pulsating/vibration issue.
View 9 Replies
I have a 2011 Sonata and am approaching 100,000 KM. I had my car put through a general service and ended up with a new problem (my brakes with light pressure would go to the floor after the car stopped) in an attempt to fix this replaced parts which included new master cylinder, booster pump, ABS module and my BRAKES still go to the floor after my car has stopped. The car does stop when I brake so why would the pedal go to the floor after the car is stopped?
View 9 Replies
With only 1,800 miles on my 2016 Sonata Limited, the brakes make a high-pitched noise when applied and backing up. I noticed yesterday the noise has also started as I brake for red lights.
View 5 Replies
My 2008 gs 350 E-brake or parking brake isn't as tight anymore on a hill it doesn't stop my car when applied when parked how to adjust this? I rather not go to the dealer if its a simple fix?
View 5 Replies
Back in April when I was getting my car inspected the mechanic told me I needed new rear brake pads. I knew I did so I let him change them.
Now I get noisy brake pads this moaning sound out of them when I apply the brakes while I'm backing out of a parking spot or my driveway. I've only driven about 5 or 6 hundred miles since then.
View 8 Replies
My driver side brake light keeps going out. I replaced the bulb couple of months ago and had to replace it again. Switch the socket? Switch to led bulbs?
View 5 Replies
Over the past 4 months I've had the brake warning light, the one that comes on when you press the parking brake on, come on randomly. In each occasion turning the car off and then starting it back up clears it for the rest of the day. I had it happen 5 months ago, a couple months ago, two weeks ago on new years and then this Saturday and Sunday. Took it to the dealer today and it shows no codes but they managed to get it to come on once. They think its an electrical issue which makes no sense to me.
View 21 Replies
I'm driving a 2010 Hyundai Sonata and just recently one of my brake lights has been acting up. Everything works perfectly fine as long as the head lights are off; however with the head lights on, when I depress the brake pedal my driver's side tail/brake light goes out. The center brake light and passenger side brake light work just fine regardless of the head lights being on or off. With the headlights off, all the brake lights operate normally when the pedal is depressed.
View 6 Replies
I have a 2000 F250 PSD. When applying the brakes, the rear end starts jumping and bucking. The effect is exaggerated when pulling a trailer and applying the truck brakes to stop. The problem does not occur when manually applying the trailer brakes. It was suggested to me that this problem is caused by a hydro boost leak.
View 3 Replies
