Taurus :: 2007 Ford - Console Shifter Hard To Move From Reverse To Park
Nov 8, 2014
My cousin has a 2007 Ford Taurus with the pushrod 3.0L. It has the console shifter and it is hard to move the shift lever into Park from Reverse. The shifer moves out of park and to every other gear with normal effort. The gear indicator correctly displays the shifter position. It drives/shifts perfectly fine. The only problem is that it is hard to move the shifter from Reverse into Park. It feels like there is a rubbery, or somewhat mushy threshold/resistance that needs to be overcome with a moderate amount of effort to get the shifter into park. Once the shifter is in Park it feels normal meaning you don't have to hold or force the shifter to stay in park.
It is frustrating because it seems most other people have a problem with the shfiter being hard to move from Park to Reverse or Neutral, but she is having the opposite issue. Will it hurt the car to keep shoving the shifter into park when necessary without getting it fixed?
View 3 Replies
Advertisement
I drive a 2008 Chevrolet Impala. The car has had some electrical problems going back about a year and a few months that I have neglected to fix. The first problem was with the shifter not being able to move out of park without hitting the button inside the center console to do a shift lock override, which started last August.
The second problem was with the ignition not being able to release the key without hitting a switch inside the ignition, which started back in the Spring. I have just been rolling along promising to eventually address those, but yesterday the car radio stopped functioning. Then this morning the car would not start.
The electrical system comes on just fine (save the radio), but when I go to start it the car just clicks over. I did not leave any lights or switches on, so I am assuming it must be some sort of problem with the electrical system.
View 19 Replies
I have a 09' 4cyl automatic engine with 54k.
About 30min ago when when I parked the shifter would not move past neutral into reverse and go into park. I can go from D into neutral or the next slot over for manual shifting. Naturally this causes a problem as you can't take the key out of the ignition if its not in park.
I took a screw driver and popped open the cap for the shift release button and used that to move it into park. Turned car off, back on, etc etc seemed fine. So when I tried moving it into reverse and it wouldn't budge. It instead would make a electronic click or snap coming form the steering column but more back toward the engine. Like more into the dash area but back in it. It would make this noise every time I attempted to move it but it wasn't a continuous sound. Just once with each jerk to the side to move it out of park.
So the car works fine except for this. I used it with the screw driver/shift release to unlock it and it drives fine. Goes into reverse and back in park but if I move it into neutral or drive it will not go back into reverse or park.
View 1 Replies
This morning as I get in to drive my kid to school (2005 2.7 2 wd auto) as I go to put it in reverse I noticeably have to pull it with some force. I have never had to "force it" before, it had always switched gears with ease. This time it felt very stiff but had no issues going into gear. After I dropped my son off at school I went through the gears up and down and it felt very stiff (at this point i have no issues with starting it or P).
At lunch I go out to get something to eat and when I go to start it up it won't start. I try and try and nothing. All the lights came on, it's not a battery issue at all (brand new). But after 10 tries it starts, so I'm pretty happy. Then I go to put it in gear (reverse) I can not press in the button on the side of the gear shift. It will not go in. I press with all my might and it wont budge. But again, after about 10 good tries at it goes in and I can then select my gear but still feels very stiff.
After stopping again I didn't shut off the engine and dicked around with the shifter basically figured out that my car is not recognizing Park. On the instrument panel each gear lights up but not P. It gets very stiff when trying to put it in P but it doesn't actually go into P. If I put it in P (or really the further up it will go) and shut off the car, it won't start again. I can start it up in N and only N.
View 9 Replies
Experienced problem with the Automatic locks on the doors? The doors on my camry lock as soon as I move the shifter out of park. The owners manual indicates that I can get the doors to lock automatically at 20 km/hr. I have tried following the instructions in the manual to make this happen but without any success.
View 14 Replies
Here is what I have:
2009 Santa Fe 3.3L AWD
70k KMs / 43k Miles
Temp has been very cold, -20C / -4 F
Car starts up without any problems. Try to put car in Reverse and the shifter is very hard to move, if it moves at all. When I am able to get it into Reverse, I then try to put it in Drive and it does not "engage" the "D" and the car behaves like its in Neutral. Moving the shifter back to Park, Neutral, Drive is very difficult and sometimes it will not go into Park. The dash lights do not illuminate the selected P, R, N, D.
However, once the car is warmed up (no longer on C on the temperature gauge) I can with a little effort move the shifter freely (but more effort than it should take) and the car behaves normally. Gear shifts are smooth and in general it is operating normally.
The dash lights do illuminate the selected P, R, N, D. I've checked the Trans fluid level and it appears to be normal and was planning to change it this w-e but I'm no longer sure it will work. Even if it has never been changed.
Also note that I have recently changed a wheel/hub bearing due to a noise that sounds a lot like loud tires on a highway. The bearing change did not eliminate the noise and I assumed that I've changed the wrong one. The noise does not appear to be coming from the Trans, but I cant be 100% sure. The noise is speed related and occurs only after about 20KM/h 16MPH. Unsure if they are related..
View 3 Replies
Got in to go to work this am, and the gear shifter was difficult to move. What to check?
I drove 70 miles to work and didn't seem like any issues with the transmission shifting.
Got in to go to lunch and it seems even more difficult to move...
Shifting back and forth in the selector seems to loosen things up a little.
A friend move the selector while I looked at the linkage and the bracket that support the cable is flexing while shifting between gears....More likely a transmission issue or something with the linkage?
View 24 Replies
So lately this has been getting worst. You have to step on the brake before you can shift out of park. Well lately I have to step on the brake a few times before the safety will let you get into gear.
View 7 Replies
While traveling I made a fuel stop. Restarted engine fine, stepped on brake, but could not move the shifter out of Park. Towed to Ford dealer, after extensive trouble shooting replaced shifter cable and transmission position sensor. A week later same problem but glad I learned about the interlock override lever on the steering column so can continue to drive. It locks up several time a day. Here's what I know and observe.
. brake light switch appears to be normal
. engine starts normally
. brake lights operate normally
. fuse on interlock function is ok
. when the lockup happens the shift indicator is missing the box over the P
. this may not relate but backup/reverse lights operate very weird - in reverse they only light when the engine in rev'd and go out when the gas pedal is released
There appears to be a gremlin in this Escape that eludes Ford and me. I read some reference to a computer control involved in the interlock function. I'm at a loss.
View 14 Replies
2000 VR6 automatic. Yesterday my car was stuck in park couldn't move the shifter . Figured it was the brake sensor switch when the brake is engaged food pedal lights do not go out, I replaced it this morning but still won't work I've been driving it around in limp mode?
View 4 Replies
I have a 2006 Hyundai Sonata, 2.4, 4-cyl automatic. While pulling into a parking space, the driver in the vehicle next to me threw her door open. I braked quickly (but did not slam on the brakes) to avoid hitting the door then continued into the space after she closed her door. I then tried to put my car in reverse to re-position it in the parking slot. The shifter on the console would not go into REVERSE and obviously not into PARK since PARK on the shifter is above REVERSE. The shifter will go into both DRIVE and NEUTRAL. I now have a car that will go only forward. Also, I cannot remove the key from the ignition switch since the shifter will not go into PARK. I've not had a problem like this with this or any car before.
I also noticed that my ABS/ESC has been coming on more frequently and staying on and I attributed that to a bad sensor since my brakes are in good shape and I have not had to rely on the ABS system. I don't believe that the ABS/ESC warning light and the shifter problem are connected but I'm not totally sure. Why my shifter won't go into REVERSE or PARK????
View 2 Replies
So my friends 2002 camry has a problem where she shifts the shifter into drive, but the gear position indicator in the cluster still shows her in park, and the car will still be in park with parking pawl engaged. is this a sensor that went out, or a deeper transmission problem to be dealt with?
View 1 Replies
So after owning my R for just over a week I've noticed that when I accelerate hard or let off the throttle the shifter seems to move quite a bit. Is this normal with the stock mounts or is it something I should have looked at? I know the stock mounts are rubber to aid in isolating the vibration of the engine but it seems like the shifter moves a little more than I would expect.
View 1 Replies
Corolla '04: I have to press the brake pedal extremely hard to get the shifter to move out of the Park position.
View 5 Replies
About three weeks ago I noticed a slight shudder in my 2008 Ford Taurus with app. 75,000 miles (automatic). It did not come from the steering wheel, but the car itself seemed to be shaking, but only slightly. Like someone who's had too much caffeine holding out an unsteady hand kind of shudder. It was going in for an oil change anyway, so I had my mechanic check it out, even thought the shudder was gone the next day. It came back, for a few moments while the mechanic was driving. He couldn't tell what was causing it, but said not to worry.
Two days later when I was in the car for the first time that day the car jerked when I put it in reverse out of park. I checked the transmission fluid, and, sure enough, it was about a quart low. All symptoms went away. I took it back in to double check that there was no leak and that everything seemed in good working order. The car was given the all-clear.
Then this week the shudder returned, again, only sometimes. It doesn't seem related to temperature, distance driven, or weather. And the maddening thing is that it only does it sometimes. I checked the transmission fluid again and it is still in the safe zone.
Two days ago, after being parked overnight, the car shook very noticeably for about ten seconds the first time I switched it out of park, first into reverse, then into drive. This was different to the other shudder (I know, seriously). This was a shake, like the bass in a super strong stereo was cranked. Then it stopped and the car drove just fine. I parked it for twelve hours then switched the gears again. Nothing out of the ordinary happened.
Today it had no issue when I first switched gears, but while I drove (for about a half an hour) that original slight shudder was there. This time at all speeds, not just low ones. I went where I needed to go, drove it again about four hours later and it was fine. No shudder, nothing and this drive went through road work with stop and go traffic as well as some time on a highway at speeds up to 55mph. I drove it another time after that, and again, no symptoms. Finally, I drove to the store. The shudder had returned. I parked, shopped for about 15-20 minutes, returned to the car, and it hesitated to accelerate as I pulled out of the spot. It did not jerk or seem to try to catch up. It simply delayed, but accelerated smoothly.
I parked again and let it rest for about 10 minutes, started it up, and no trouble at all. Even that weird shudder was gone. I think this car is toying with me. I'm taking it back to the mechanic, but the trouble is that it doesn't always have these symptoms. I drove it Thursday on a two hour trip and back again with no issues at all. This might make it difficult for the mechanic to diagnose, but at least it's a guy I trust. There are no warning lights on, no smells (unless they are faint as I don't smell things well), and no strange sounds.
View 2 Replies
My 1996 Buick Park Avenue had problems finding reverse. You would have to move the shifter in and out of reverse and get it in just the right spot to go into reverse. once it is going in reverse you can hear a slight ticking sound like the park gear isn't totally disengaged. now it is nearly impossible to find reverse and when you put it in neutral its like it is in park.
View 2 Replies
I am having this on and off problem of getting the shifter out of PARK sometimes its easy sometimes its frozen. I am going to take the plastic off to investigate the linkage more and I know there is a brake shift to unlock the transmission out of park. 2002 ford escape 3.0 ....
View 5 Replies
Well just as stated above...basically when I put my brakes on, my shifter will refuse to go from Park to Reverse. I have to open the little "Shift lock" cap and manually press that button to be able to go to reverse...or sometimes back from D to P. It just started doing this a week ago.
2006 Sonata
View 14 Replies
I've got a 1.8T 2004 automatic and the problem I'm having is the shifter is harder to move since the weather's been colder. It shifts very well and is responsive, it's just that I have to pull it harder to select P, R, N and D. D is especially hard (no pun intended you sick minds! ) to select, the shifter kind of stays in neutral but shifts after a bit. Is there anything I can do to fix this?
Side question: is the rear defrost supposed to turn off after a certain period of time? My 2002 golf does it but the jetta doesn't.
View 5 Replies
Installed some shifter cable bushings. But now reverse is harder to get to. Instead of just pushing it down and left for reverse.. Now I have to tilt the shift know slightly towards 4th gear then push down and go left and the gate seems so much smaller now. Overall it doesn't feel that much better than stock. what could i have done wrong?
View 6 Replies
2011, 69,000 miles. My truck is experiencing very hard shifts from park to drive or park to reverse after a cold soak. It goes away once warmed up. I can't find any excessive driveline play and my transmission fluid level appears fine and in good condition.
The last repair done on my truck was around 7,000 miles ago and it was for a transmission fluid leak around the bell housing. They just replaced the seal between the torque converter and transmission.
View 13 Replies
