1999 Toyota Camry. Suddenly gears failed to engage. When sfitinthe gear shaft does not go in to any gear- shifter moves easily but does not engage at any gear. Is it due to lack of transmission fluid?
View 3 RepliesI have a '99 Toyota Camry automatic transmission with about 184k on it. I bought it used last summer.I noticed that when I speed up, it is sometimes slow to switch gears. I have to ease off the gas before it changes gears. This also happens when I go from reverse to drive. I experience it more noticeably when I haven't been driving the car for long or on a cold morning. I haven't brought it in yet...
View 6 RepliesMy 2003 Toyota Camry has over 100k miles. I believe the previous owner never changed the transmission fluid because it look black and smell burnt. I took it to an auto shop for them to drop the pan, change the transmission fluid and filter. How do I know if changing my transmission fluid and filter resurrected or killing my transmission?
View 19 RepliesBought a 2011 Toyota Camry about 2 weeks ago. Noticed a few days ago a severe whine I think is coming from the transmission, when it is started. The noise goes away after about 2 miles of driving and the car seems to shift OK. The dealership says this is "normal", but I've not heard other Camrys doing this.
View 2 RepliesCar has been working fine but yesterday the transmission just wouldn't engage. The engine was running fine. I've just been using it as my around town car so probably put about 5K miles on it a year at this point. It has small dent in the bumper and the interior is fine but old.
I'm tempted to replace the transmission because it is an easy (albeit expensive) solution, and less work (and money) than looking for another used car with an unknown history. But does it make any sense? I've replaced the exhaust, tires and battery recently. When might the engine start giving me trouble?
1994 Camry Wagon, 215k miles,
I have a 2011 Ford Fiesta and yesterday morning I went to start it and the check engine light came on. When I tried to shift into reverse, the gear lever moved but the gear wouldn't engage. None of the other gears worked either. I turned the car off and back on again, and it was fine (the check engine stayed on, though). I have to repeat this process every time I start the car, and this afternoon it took three tries. This a low-mileage car: I bought it brand new a little over 4 years ago, and it's barely over 20,000 miles. I have an appointment scheduled with the dealership, but is this something that's going to cost me a lot of money or is it just a computer issue? One other detail: it was very very cold the night before the issue started (about -10 degrees).
View 19 RepliesI have a 2004 Explorer 4.0 4x4 with 130,00 miles that started with the transmission periodically going into neutral while driving and sometimes while stopped at an intersection. Engine running, but no reverse or drive gear. After shutting down engine and restarting, I can drive again only to have it happen soon again. I have changed rear speed sensor, throttle position sensor, dropped the tranny pan and changed the ATF as well as tranny filter.
I also attempted to replace the transmission range sensor but was unable to remove the nut that holds the shift level onto the sensor. Sent 5 hours one day.... nut will not budge. Now the shifter inside the truck does not feel the same when shifting through the gears. Now the transmission will only engage in reverse but the truck will not move. If I wait 30 sec or so the truck will move in reverse. No engagement in drive, 3rd, 2nd, or 1st.
I have a 2009 Santa Fe (Automatic 3.3 v6 AWD). I have found the last few days (-20 C) where my gear shift will move into all gears (R, P, N and D) but the car wont move in Drive. R, N and P all work fine. It does seem as the car warms up everything's fine.
The light in the dash for D does not light up either when not working. What this might be?
Its a automatic transmission with a v6 4.3 vortec. The front axle will not engage, it is not the acuator (I replaced it and the cable) you can pull the cable and the axle will engage. There is a low buzzing noise(coming from the drivers side) until you give it gas. This noise stops when the front axle is engaged. The transfer case will go from hi to low without any problems.
View 1 RepliesI have a problem with automatic tiptronic transmission my golf MK4 TDI 1.9 2001, it dosent engage on 4th gear when i am driving, the codes that I received for this foults:
01316 - ABS CONTROL MODULE
49-10 No communication- Intermittent
00652 - Gear monitoring
27-10 - Implausible Signal - Intermittent
This transmission shifted smooth and strong through all gears until today when it stopped all of a sudden to engage either Drive or Reverse. No previous signs of slippage, hesitation, stalling or lack of power whatsoever.
We checked the linkage to the transmission and it works as intended, nothing loose or broken, everything is in place. If there was something slightly different with it from other similar vans we have then it had a slightly delayed engagement in Drive (it took a second to engage it after you moved the lever) - on all other vans we have the transmission go into Drive almost instantly.
Van is a '92 Pontiac Trans Sport/Chevrolet Lumina APV with the 3.1L V6 Chevy TBI engine with the 3T40 automatic transaxle. Where we should start tackling this issue?
I drive a 2007 camry hybrid. i live where there is a lot of snow and unfortunately my only place to park is in the street. last winter, a couple of times i had an incredibly difficult time getting my car to move because the 'automatic traction control' would engage as i tried to pull out of the parking spot. there was a decent amount of snow, but if this automatic feature hadn't engaged, i would have been fine.
I know in the newer models, there is a button to push near the steering wheel that turns off this function. this is not the case with my car. is there any other way i can disengage this function?
In my haste last year i quickly read a couple of other messages suggesting i go through a series of depressing/releasing the brakes, followed by turning on/off the car etc etc (like a video-game cheat code!), however i had no luck.
I have a 1993 corolla auto trans and when I first try to take it out of park it will not shift. I noticed that when I push the brake pedal to the floor it finally shifts. I recently replaced the brake switch, could the adjustment be a problem?
View 1 RepliesI have a 2010 Matrix with automatic transmission. 5.5 year old with only 44,000 KM ... The transmission jerks annoyingly when up-shifting from gear one to two. I replaced the transmission oil and had Toyota service confirm there is a problem.
I read that the accumulator should be checked and adjusted as well as the throttle which can be done without removing the transmission, but Toyota tells met hat everything is now electronic and there is nothing to adjust. How to proceed?
83' Toyota Celica GT with an automatic transmission. The problem that we are having is that we can't get it to turn over. All it wants to do is click at us. As far as we both can tell all cables and wiring harnesses are plugged in and there aren't any loose wires. We've had the alternator and starter checked and they both passed. Also there is a new battery with new terminals installed so that's not going to be the problem. In all of the reading that I've done I keep hearing about a neutral start switch. What is it? And where is it located? I believe I've found a spot where it should be but there isn't anything there. And we've put all of the parts in the car back where they go.
View 4 RepliesI have a 06 toyota tacoma 4x4 automatic that thumps like it goes into gear after i come to a stop. it also vibrates at speeds from 0-35 and 35-0. what could be wrong?
View 3 RepliesI've recently bought a 2002 toyota corolla wagon. I noticed the transmission fluid of the automatic gearbox has been overfilled. This measurement was with a cold and switched off engine and on a level ground. Is this something I should be concerned about and can it cause damage? Should I have it drained to the normal level or is it ok to keep it this way? I didn't come with a manual so I'm not sure if i measured correctly.
View 1 RepliesI have Toyota Camry 2009 . My automatic lock doors stopped working at all. But it was long process, first all passengers doors sometimes opened, sometimes closed(I mean button on the doors didn’t open or close doors, remote control also didn’t open or close doors). Then they stopped function. 1 month later drivers door stopped working too. Now I can use only old fashion way. I made my research and I think I have to replace body ECU because it response for automatic door locks(but it cost a lot). What it could be?
View 7 RepliesMy 2007 V6 failed me several times on very cold mornings. I start the car, wait about 1 minute and then drove it to a stop sign or red light (still cold). When the light turned green, I tried to proceed, but it was as if the car was in neutral. The car would not move. It was only after about 2-3 minutes, when the car started to warm up that I was able to get a gear. After 5-7 minutes, it was as if nothing happened. I have 97K on the car.
View 6 RepliesMy wife drives an 07 camry; 4 cyl/auto. the transmission has a dipstick so I can check it, and I can see it is discolored. the car has 76kmi on it. she just drives it back and forth to work; no abuse, no start/stop, just highway and 45mph roads.
I am going to change the trans oil. I see on the dipstick it take Toyota WS fluid. I'll buy it at the dealer to be safe.
do I *really* need to drop the pan and change the filter? I have a fluid evacuater, and could suck it right out the dipstick, or I can pull the pan plug.
Is the dealer going to sell me a filter and pan gasket? I have read that many dealers wont even sell me the parts.
I have a 2009 camry. My overdrive shift does not engage. Sometime when I push, the display shows and sometimes does not. I feel its a contact problem but if its the solenoids or some relays somewhere.the car is consuming excessively on gas.
View 7 Replies