Accent MC (2006-11) :: Won't Start After Filling With Gas
Jan 25, 2009
I have a check engine light issue combined with another issue when I have trouble starting the car after filling with gas. I fill it from less than a quarter tank to a full tank and it takes 5 tries to start it. The code that I'm getting is P0171 which is a fuel system for bank 1 is too lean. It runs ok as far as I can tell, but I just bought it. Its a 2006 Accent with 68 k miles. Both events happened close to each other. The check engine light came on when I was driving on the expressway and quickly stopped since the exit had traffic backed up on it. It triggered the check engine light with a quarter tank of gas I filled it up and then it had trouble starting
I already took it back to the dealer and he just cleared the code. I'm really worried about the check engine light coming on for silly things. They said it just needed to be cleared. Does it always do this? What if there is a real problem? If I take it back and he doesn't fix it, when can I get into the lemon law type stuff? I bought this car since I thought it would be reliable, but it already says check engine. Its only been two weeks since I got it and already having issues.
View 37 Replies
Advertisement
My wife's 2007 Accent started having starting problems right after filling the tank. Is this an EVAP canister problem?
View 8 Replies
I have a hyundai accent, 2002, I have the typical hard to start when filling up the tank. My understanding is there are 2 Fuel Vapor Purge Valves, one in the rear next to the charcoal canister, the other is in the engine compartment attached to the intake manifold - is that correct?
Which purge valve is the culprit to the hard start after fueling the car? Why can I only find the rear purge valve when looking for parts - is the one up front a dealer only part?
View 5 Replies
I have a 2000 Hyundai Accent hatchback with 98k miles. About a month ago we were headed out of town and got gas about a mile away from the house. After filling up, the car wouldn't start. It would crank but not fire. Tried for about 15mins to no avail. Had it towed to local mechanic and it started right away. They kept it for the weekend and said they had no problems starting it, so without experiencing the problem they said they would just be throwing parts at it.
About 2 weeks after my wife drove to store and when she went to leave and same experience, but this time it started after trying for a couple of mins. Then just this Tuesday it wouldn't start in the morning. When it just cranks but not fire it shows a pending P0335 (crankshaft position sensor). So I ordered the part (won't arrive til Friday). When I got home I tried to start it as well to no avail; tried again Wednesday morning and evening, nothing. Then this morning (Thursday) it starts right up. Once its started it runs great. After recurrence of no start 2 weeks ago, I replaced spark plugs and spark plug wires.
View 6 Replies
I just bought a 2010 Accent for my daughter and this was the 2nd time I filled it up. I realize now I should not have topped it off all the way but I did. The tank was probably bone dry when I filled it up as well. Within 5 miles after I filled it up, it started running rough and the check engine light came on. I stopped it and checked around under the hood. Checked to make sure the gas cap was tight. I drove it again and it appeared to run fine. I stopped by an Autozone and had the code checked. It was a misfire code for cylinder 3.
Drove it home (10 miles) and parked it. I took the battery terminal off and cleared the CEL. When my wife drove it a few minutes later, the CEL came on again and it started running rough. Had the code checked again and the cylinder 3 code came back. The guy at Autozone said over-filling the tank when it was empty probably caused too much pressure on the fuel going into cylinder 3 and that it should correct itself in the next few days. I drove it 20 miles to work today without any problems. It seemed like it had to be related to filling up the tank since it happened a few minutes later.
View 3 Replies
Every time I fill up my gas and put the hands free nozzle switch it clicks every time.
View 5 Replies
A few weeks ago my car was running perfectly fine, i filled it up with fuel and then it started running a bit rough. Would drive ok but could feel it surging and if i backed off on the accelerator it would try stall.Also the fumes in the car were a lot stronger than usual. Got home and it stalled, started it up and was idling rough and blowing black smoke :/ no engine light has come on though. I did the typical thing and googled possibilities, the mojority said that it was the purge control valve so i replaced that with a new elantra one (part numbers were the same) and its still running rough We are now thinking it could be the oxygen sensor? Have checked vacuum lines and stuff for air leaks and cant find any. Unplugged the oxygen sensor while car was running and it made no difference at all.. If the oxygen sensor was working properly it would of affected how the car was running, right?
View 1 Replies
It seems like my passenger door is filling with water, whenever I open it, it comes pouring out through the drain in the bottom. It also seems the water ingress has killed my central locking on that side. It's getting in through the gap between the door and the window. How to keep it out?
View 5 Replies
Immediately after I fill my 2006 Hyundai Accent with gas, the engine shudders, then dies. The only way to keep it running is to press down the accelerator and rev the engine up for a few minutes, then slowly back off. My mechanic said I need an new fuel pump, so he replaced it, but it didn't solve anything. I still have the same problem every time I fill up. What's causing this and did I just pay for an unnecessary fuel pump?
View 6 Replies
I have a 2000 hyundai accent and when i fill with fuel it surges like its running out of fuel and stalls when fuel is gets low it runs fine.
View 2 Replies
2014 Accent 14,000 miles
Filled the tank and shortly thereafter there CEL started flashing and the car sounded like it was missing. It was towed to the dealer, and they said they cleared the light and could not get it to happen again.
When I next drove the car it ran fine for 20 minutes, then it started misfiring and the CEL started to flash. Had it towed to a different dealer, and they said the same thing. Cleared the light, but couldn't get it to happen again.
On the way home form the dealer, after about 20 minutes of driving - the same thing. Today, I started the car in the AM no light and running fine, drove around and town and in exactly 20 minutes it was misfiring again.
First dealer said it was a P0302 code.
View 4 Replies
Recently, my Accent has been acting up (twice) while filling the tank. I haven't done any work on it that would cause this recently, but while fueling, the pump will click and stop repeatedly, as if the tank was full. It takes sometimes 20 minutes just to put 8 gallons in it. I've tried two separate pumps. Next fill-up, I'll try a different gas station because I've heard that can sometimes be a problem. They said their pumps weren't empty so that's not the case.
View 5 Replies
Having an issue with my 03' Accent. I'm having an issue of my coolant tank filling up but it is not being drawn back into the radiator when the engine cools down. I have replaced the radiator with a new unit because the filler neck of the original radiator was damaged sometime in the past and the cap would not seal good enough to hold pressure . Looks like heat damage to me but I don't know for sure. The system now holds pressure but now I'm having the current issue. My first thought was a head gasket issue creating pressure in the system and forcing coolant into the tank.
The car has 155k miles and runs good overall and is not overheating. I performed a "block check" test using the chemical method that detects combustion gasses in the cooling system and that test was negative. I also pressure tested the system by pressurizing to 16 psi and was unable to detect any leaks anywhere on the engine / radiator and the pressure did not drop until I released it. I guess the next thing to try will be a compression test to see if I have any low cylinders. So, for whatever reason my cooling system is not creating enough of a vacuum to draw the coolant back into the radiator when it cools down. Does this sound like a head gasket issue? The pic is of the original radiator filler neck damage.
View 8 Replies
I have a 2000 Hyundai Accent that just started not filling up. The pump kicks off every couple seconds. From reading other posts it sounds like its the evap canister (wife would often top off the tank). The question is, does the evap canister need replaced or do the hoses need cleaned? Is there an easy way to get the hoses off?
View 4 Replies
I have a 2003 hyundai accent gt 1.6v runs great other than when I get gas. As soon as I fill my tank the car doesn't want to start. It cranks turns over idles very low and then dies. I have to try to start it about 3 times before it will stay running. Starts perfectly fine in hot or cold weather only has problems right after filling gas tank. Started about a week ago. What could be the problem?
View 2 Replies
It was the worst tonight that it has been in a while; I needed to crank the car 3 times to get it to start; mind you when it runs, it runs great.
With a bit of research, this is looking like a fuel pump/check valve problem. I have a 2010 Hyundai Accent GS, would this mean I need to replace the fuel pump assembly?
If this is the case, I want to do a beta swap over the summer. If this works out, should I upgrade the fuel pump/does the fuel pump need to be upgraded? and if so, would the upgraded pump cause other issues?
View 3 Replies
My car has a bit of trouble starting every now and again. I have noticed it is when I have low fuel. When I try to start it it will just keep winding over. I'll switch my car off completely and try again. It usually starts the second or third time. What could be the problem? Its a 05/06 Hyundai Accent
View 4 Replies
Probably 20k ago the check engine light came on and was related to the "purge" valve as best I can recall, every mechanic I took it to kind of blew it off as just an emissions thing and not really necessary to fix. so whatever just let the light stay on as the car ran identical to before the light came on.
Fast forward to a few weeks ago and my wife was filling up between classes and after she was done and went to start it, it would turn over but wouldn't start completely, luckily a guy there pump the gas and revving it out as he turned it over. then it ran perfectly fine afterwards, started up perfectly after every time....until we got gas again.
Took it to a local guy a few people I know used, told him about the check engine light and maybe the purge valve thing had finally gotten bad enough to need replacing (this was my guess after some internet digging for the same issue), he troubleshooted and came to the decision to replace the front o2 sensor. Ok I said, your the mechanic not me, do it. did it and next time got gas....same thing.
he had it for another 2 days and "couldn't figure it out", refunded me completely for the o2 sensor & labor, while throwing in the towel today. Next up , Hyundai dealership I suppose. Car is throwing NO CODES whatsoever now, have put several hundred miles on since new o2 sensor.
While he had it he had to replace the master brake cylinder. So that's new as well. I've had to replace all the coils already between 75-85k they started acting up one by one so I said screw it and did them all.
OH and another problem is the airbag light has been on the dash for about the last 6-9 months as well.
The car has just over 111k on it and I've about had it, bullshit problem after another and another. What's next??! I've owned probably 7-9 cars in my life and nothing has given me the aggravation of this car.
Cliffs:
1) car won't start when putting in gas
2) starts if you rev it up for a short while, then will start every time afterwards til next fuel up.
3) o2 sensor is new
4) no more check engine light, no codes, yet still have issue
5) car is starting to wear down my patience with repairs
6) if not a cheap fix, bye bye Hyundai
View 16 Replies
The car doesn't struggle to start at any other time just when fueling. I have a 2011 Accent and I am looking for the locations of the various components involved so I can test them to see where the problem is.
I know the purge valve is mounted on the rear of the intake manifold below the air hose. Now is the solenoid and the valve the same part? I see various diagrams pointing to the valve and labeling it solenoid. The other part is the EVAP canister. I know it's some place near the gas tank but not sure where and I can't find any diagrams online.
I am comfortable with minor repairs. I've replaced spark plugs and ignition coils and a purge valve before so would this repair be something I could do myself or would I be better off taking it to the dealership?
View 7 Replies
My 2008 Accent has a manual trans and 4-Cyl, 1.6L. It had some bad fuel 4 weeks ago, and filled the tank with 97 to clean it back up.
I was driving and came to a stop sign - the server stopped and wouldn't start up again. I was worried about the fuel pump, and ended up replacing the whole thing (under the passenger seat).
I have tested the following:
- When cranked, the bottom of the spark plugs are wet (so gas is getting to the plugs)
- When plugs are pulled out, they spark against the block (so spark should be getting to the cylinder).
The car still doesn't start, and the cranking sounds 'off'. I can't exactly describe what's wrong, but I've had it for six years and it doesn't sound right.
View 17 Replies
I was driving my Accent yesterday when suddenly it shuttered and stopped accelerating, it was still on because my RPM gauge would move when I hit the gas, when I went to pull over it was very difficult almost as if my power steering was not working. Now that it is off it will not start, it cranks but will not turn over. We tried a new battery, but that did not work. What it most likely is, I have 109k miles on it.
View 16 Replies
