Ford F-150 - 1997-2003 :: 2001 XL - Wiring Info For Remote Start
Sep 19, 2012
I added a remote start to my 2001 F150 XL. The remote starter says to use the negitive wire for the parking lights to flash, the form I got to wire it up says use the brown (positive) wire for the lights, its spliced into the brown & they don't work. Another question I had the door panel off, noticed that there is a harness going to the lock, is that for the dome light and door ajar light?
Does it have power wires in that harness for power door locks even though it has no lock switches? Last question, I have to hook up the tach wire for the remoter start. The blue and green wire at the tach is the wire they say to use for the tach signal, does it stay the same color into the pcm from under the hood than out the pcm under the dash or does it change colors under the dash at the pcm?
View 1 Replies
Advertisement
I bought truck with marksman remote starter and it worked great. until... I lost the truck keys. ford dealership reprogrammed key code and cut new keys.
Truck now thinks that it is being stolen every time i try to use remote start. nothing major, theft light on dashboard idiot-light hud flashes.
The question: How the heck to i bypass the anti-theft module? I know that there is equipment out there to do it?
View 14 Replies
I just picked up an 02 Supercrew. It came with a “Ford” remote starter. I imagine it was a dealer install for the previous owner. Anyways when I try to use the remote starter, it will crank the engine over but not fire. If I manually start the truck it fires up immediately. How come the remote start wont fire?
View 7 Replies
I am looking for a site that i can download a service manual with good wire diagrams. I want to install an alarm with remote start and need to know what wires go to what.
View 2 Replies
I have a 2001 F150 Supercrew Lariat. About a month ago I stopped to fill up with gas and afterwards it would crank but not start. After a few tries the engine would no longer turn over. My battery was 7 years old so I replaced it and the problem went away for about 5 days. Then the same thing, crank but no start. I checked all the fuses & called the local Ford dealer.
After talking with the parts dept. I tried hitting the panic button then the truck started. After talking to parts again I replaced the PATS transceiver. After 3 weeks with no issues the problem came back. This time I locked the doors with the keyless entry remote then unlocked them & the truck started. So I'm wondering what is my problem. Could it be the PATS module or something with the keyless entry module or some other issue.
View 14 Replies
F-150 Super Crew 5.4 4X4 cranks won't start. what and where do I check first?
View 8 Replies
About a month ago, my 2001 f150 supercrew (4x4 5.4L) didn't want to start one morning. This was after a very cold night (15 degree temps). It sounded like it had plenty of juice in the battery (cranked good), just wouldn't start. Later in the day, after it warmed up, still no start. I dug thru here, and someone recommended disconnecting the positive battery cable for a minute then retrying. I did it, and it worked. All was good.
About a week ago, no start in the morning again. Tried the positive cable disconnect, no luck. After several hours, it just seemed to randomly start, and all was well again.
Today, truck started right up in the morning, but later in the afternoon (warm winter day 45 degrees) no start. Tried the positive cable disconnect, no luck. After screwing with the truck for about an hour, I decided to put the fuel pressure gauge on the rail. NO fuel pressure.
Is fuel pressure associated with the PATS, or is this a straight up fuel system problem?
Additional info: My gas tank fell out this summer, (recall on those tank straps), and I had a new tank, pump, straps and lines installed. I had a no crank, no start issue this summer, but that turned out to be the transmission not registering in park. I assume the two issues are unrelated.
View 7 Replies
So I just bought a 2001 F-150. It has the 4.6 v8 it's a 4x4 automatic. Sometimes i'll go to start it in park but nothing will happen. But if I put it in neutral. It'll start right up.
View 7 Replies
I have a 2001 ford F150 with a 5.4 2WD, with a starting problem. Last Friday I went to leave work the truck cranked but did not start, turned the key off and tried again same thing, on the third try it started. Drove it home 30 miles with one stop on the way, restarted just fine. At home in the driveway I restarted it 5 times without a problem so I was thinking it was just a glitch. Did not drive the truck all weekend thinking the problem was fixed.
Monday morning leave for work and everything was fine, went to start the truck in the afternoon and the same problem as listed above (3 or 4 tries and it started). It home again in the driveway restarts every time. I do not have any check engine light on but I thought I would still plug in my code reader NO CODE. Where to start troubling shooting this problem?
View 11 Replies
We have a 1997 f150 with the 4.6 in it originally. The 4.6 was pulled and a 2001 5.4 engine was swapped. I was called to see why it could not run. I did some preliminary tests and suspected the PATS system.
I cannot get the fuel pump to run by jumping the relay and I am assuming all the wiring is proper from the swap.
The 2001 5.4 engine ecu has been transferred over. I run the obd tests and get a bunch of codes but none point to the pats system. The theft light does not prove out or does not flash. I can get it to turn on via my obd scan tool. I have an elm tool.
I do know the 1997 cluster was not changed. The ignition from the 2001 was swapped and have only 1 matching key with it.
When I jumped the fuel pump relay, I produced the code p0232 which tells me the computer saw current in the pump circuit when the PCM has it disabled. Should a swap of this kind also include the pats components ? I also cannot get the fuel pump to run by jumping the relay.
I have the codes :
P01703
P0232
P01747
P0750
P0755
p1451
P1409
P1633
View 7 Replies
01 supercrew 4.6. Have had intermittent no start. The first few times it did start with a jump. Cranks fine but I thought the battery was weak. Replaced battery, same issue. 40 psi gas pressure at the fuel rail with analog gage. Theft light blinks with battery inserted. Theft light not illuminated while cranking. Battery light flashes while cranking. Battery is brand-new and charged. Opened and closed inertia switch several times to check.
View 12 Replies
2001 f150 4x4 5.4 205k ... This truck is not my daily driver but I use it about once or twice a week. Last night I drove it to the store and it ran great. As good as ever.
This morning it won't start. It cranks and the battery is strong but no bang. It was cold. Just below freezing for the first time this year. No blown fuses where would you start?
View 13 Replies
I have a 2001 F150 Supercrew that cranks but will not start after a hard rain. The mechanic checked the gem module and the fuse box, the gem module looked good but the fuse box had some corrosion he thought from water so he replaced the fuse box and had a body shop reseal the windshield. The first time it rained it started right up but after the next rain it would not start. I went out 12 hours later and it fired right up. I wonder if I would be better off taking to a Ford dealer. What to do next.
View 2 Replies
My truck, the aforementioned 01 f150 5.4 has been running fine but has had the codes p0401 and p1740. I know what they both mean I just haven't fixed them yet. Today I went to move my truck and it wouldnt start. It turned over fine and would hit some but wouldn't start. Would the tcc solenoid be the cause of that? Also the reason my egr is throwing is because there is a line that is not connected but I have no clue where it connects to... Where is the best place to get diagrams for the egr system.
View 3 Replies
This is a truck at work, I had my student workers put in a new blinker switch, and when they were done it won't start anymore. The "theft" light is flashing on the dash, so I guess the PATS system thinks it was tampered with. How could you trigger this by changing the blinker switch? Does this have to be reset by a dealer?
View 3 Replies
I have a 2001 F150 step side 4.6L that just stopped turning over to start. The engine rocks slightly when you turn the key, then nothing but a little electrical smell. Was starting fine up to this past week. Battery is strong and good and upper battery connections clean, has original starter solenoid. I am a weekend mechanic, my son's work truck, trying to do this myself.
View 1 Replies
01 F150. Cranks but no start, will fire with starter fluid spray. Theft light fast flash, Check engine light on. Only have one key and don't know what the kid that had owned has done.
View 5 Replies
Ok so I was looking at my blend door actuator motor to see if it was working. Just took off the bottom vent cover, turned key on and moved the air mixture to see if the motor worked. (it didn't) Then I went to start the truck and all I get is the solenoid on the firewall click each time I turn the key. I put a meter on the opposite side of solenoid and I see 12v across the solenoid. I can't image i did anything while playing around by the blend door actuator motor. I guess I'm looking for confirmation that the next logical step is starter and starter solenoid. Is there anything else I could be missing? is there anything else in that circuit between the solenoid on the firewall and the starter? I also cleaned the battery terminals and the terminals down on the starter solenoid. I also tapped the starter a bunch and put a charger on battery and tried jumping the truck too. Everything else works.
View 10 Replies
My 2001 f150 is not starting up. The anti theft light flashes and then eventually slows down and flashes one time, pauses and then flashes two more times. The odometer still shows my mileage as I know some people with this issue just get dashes. I know there are passive anti theft codes that can indicate what is wrong but cant find a chart with any info for all the codes. I'm going to assume my pats transceiver module is shot. Or maybe the key simply needs to be reprogrammed? I checked fuses, relays, etc and didn't see any that were blown. What could be causing it? Or maybe there's a relay I forgot to check out.
View 6 Replies
I had the battery unhooked for an extended period of time while replacing the starter. My father owns a 1997 F250 heavy duty. Well he was parked beside me when I was putting everything back together. He goes to lock his doors and ended up locking mine and his. After that my remote won't work at all, but his does. What happened? Howdo I fix it? I tried to unhook the battery for 3 hrs and plug it back in. Still nothing.
View 2 Replies
I'm putting in a remote starter keyless entry in my 2000 f150 I have all the wires figured out except for the remote start part. Where the wires listed in the photo go? I do have the module required.....
View 3 Replies
