Just bought a used 2005 F250 with a 6.0 PSD.
It has electric door locks but I was only given a standard key.
Q1. Are there trucks without Remote Keyless Entry?
Q2. How do I tell if the keyless receiver is installed in the truck?
Q3. Is there a way to unlock all the locks with the key in the door?
I recently purchased a 1999 F250 S/D v10 5 speed ext. cab and only received one ignition key (no keyless entry fobs).
The truck does not have a keypad on the doors, but if this truck has the remote keyless entry option, how can I tell?
My remote start/entry on my 2013 F250 won't work outside of 25 or 30 ft from the vehicle. On my 2011 it would work close to 100 yds away. My dealer has no idea why. And yes, I changed the batteries
View 12 RepliesI can't remember my door code and don't want to take it to the ford dealership and pay. I know there is a code up under somewhere but I can't find it? 2005 f-250 lariat.
View 10 RepliesI have got a new 4 button key fob for my 05 F350. How to program this unit for the keyless entry and the remote starter.
View 9 RepliesThe key ring part of the fob for the keyless entry on the truck (2006 F250 V10) broke a while back. Finally got around to buyin a replacement only to realize that the keyless entry that came with the truck is not OEM. It's an Omega L2M 4410.
In trying to cycle locks to replace the fobs, the locks will not cycle. Tried everything that can be found on forums, youtube, etc. all to no avail. This leads me to believe that the aftermarket keyless was put on because there wasn't keyless from the factory.
I have experience with installing aftermarket systems, but this one stumps me - can't find where the system was installed in the first place. To me, this sounds like it should go to a shop for further investigation.
I am trying to put in after market keyless entry on my 03 sd wired up my relays according to the 5 wire alternating door locks found on this page
[URL]....
but it keeps popping my fuse when I try to put it in, if this is even the correct set up I found another guy on here that used the same set up but never said if it worked or not
Do the wiring for keypad keyless entry is in the harness and the programing in gem module on a 2003 F350 crew cab?? It would seems that is the same harness/parts as the excursion. I have not removed door panel yet, just trying to save some time.
This truck is one of my finest 4x4 rides yet, this would make much better!!! when i picked up my truck, included in the owners info was a factory keypad keyless entry code card, dealer told me that all trucks with keyless have that card regardless if it has keypad or keyless remote entry???
I have the factory keyless entry on my '03 F-250 SuperCab. I have always had to be within about 5'-8' of my cab to get the doors to lock/unlock. I thought it was normal for the longest time, but recently learned it's not. I am out of warranty now so I need to try and fix this myself. What is the location of the receiver module, and what it looks like? Also, is there an external antenna w/ the factory keyless entry, and where is it at? Transmitters are fine, as is battery power. Only think it could be is receiver/antenna.
View 14 RepliesMy 'new' 2004 F250 ExtCab SB w/5.4L sometimes 'drops' my keyless entry (key fob) for no apparent reason. Also, when I attempt to do the 'eight turns' of the ignition to get into program mode, it doesn't always work the first time (or second, or third, etc). Is this a common problem?
View 5 RepliesI have looked at many of the other treads and I can not find the answer. How do I locate the keyless entry code sticker in my 2008 F350? I just bought the truck used, I do not have the card that is delivered with the truck and I don't want to pay the Stealership to hook it up to there computer. I am looking for the RAP or the computer module as it is called in the owner's guide.
It is not behind the glove box, there is no longer a fuse access panel under the dash like the earlier SD's, the drink holder under the upfitter switches does not "pop out." Before I start with any tools, I am looking for input.
Is it possible to add the factory keyless entry without replacing the complete dash harness? I have an aftermarket unit I can add but I'd rather have oe if possible. Truck is an 2003 f250 v10.
View 1 RepliesI just bought a 2008 F-450 Crew Cab 4x4 .
Whats the correct way to use the remote start?
The lights flash and that's about it.
Where and how can I get the code for the door pad?
I bought a 2016 F-250 Lariat, Crew Cab, Short Bed, 4X4, 6.2 a couple weeks ago. One thing I had to have was remote start. My truck was not manufactured with remote start so the dealer installed the Ford 1 way remote start system. The system works fine however the air conditioning fan runs on the lowest speed when remote starting until I put my key in the ignition at which time it reverts back to wherever it was set when I shut the truck down. The whole point of the remote start for me is to get a head start on the truck cooling off but with the fan on low when remote starting it defeats the purpose. How I can change the setting so that when I remote start the fan runs on high? Dealer is clueless and the settings in the truck only allow to turn the system on and off and run time duration.
View 7 RepliesI recently purchased this remote starter and I installed it and had a local dealer program/cut the key.
I have an XLT without the message center. Do I have the manual temperature setting for when the remote starter is used? It has not worked either way as far as i can tell but it has also been very mild temps in illinois at 55-65 in the morning.
If I do have it, is it a setting i must engage somehow? I looked in the manual but could not seem to find anything.
I just bought me a 2006 Ford F350 Lariat. A sticker in front of the radiator says says that my truck is equipped with remote start. How would I go about using it? I only have one fob. If it is in fact something that I can utilize I have seen guys on youtube program their fob to do it by clicking three times.
View 2 RepliesHave an 08 F350 with V10 automatic. Keyless entry with factory alarm. I want remote start. What is the best route to go? Read somewhere on this forum that the truck has remote start and just needs to be enabled. Is this true? I have installed remote start a couple times on older vehicles and it was a major pain. I can't believe it is already on my truck, what do I need?
View 7 Repliesthe stealer says that since I already bought the truck that it would cost a lot for them to put one on for me. i figured it would be a cheap mod for a stealership to do on a new truck. i guess it shouldn't be too surprised. thoughts?
View 14 RepliesJust got a new 15' 350 XL and going thru the 'setup' button on steering wheel, there is a toggle option for power windows. got out the old owners manual and heres what it does. when toggled to 'on position' and you unlock doors with the ignition key, you can immediately press and hold the unlock button again and both front windows go down automatically. this of course is for models equipped with power windows and door locks. dont know why we need this option but it'll roll your windows down for you from afar.
View 14 RepliesI've got a 2012 XLT that I would like to add remote start to because I'm tired of getting into a truck that feels like a freaking oven.
From what I see on Ford's site, looks like this should work:
[URL]
Are there any aftermarket systems I should be considering?
It is starting to get cold where I live in Idaho, 22 this morning, and when I use the factory remote start on my 2011 the heater is not coming on as the owners manual says it should.
View 6 Replies