Ford Super Duty (1999-2016) :: Battery Light Came On - Truck Died On Highway
Oct 4, 2016
Driving down the highway, battery gauge read fine power, but battery light came on. In a remote Alaska situation so I couldn't diagnose, plus truck is new to me. Kept driving towards civilization. All gauge dropped. Then lights dimmed, then truck died. This was over about 15 miles. At night with lights on. Truck has a plow with plow lights, aftermarket cranking stereo which I was using, heater on (Alaska). It sits 70 miles up the highway from where I'm at getting ready to go back and work on it. So...
Of course first thought it is the alternator, not providing enough power for all this. Looked inside, it is a newer looking reman. Belt is fine. My question is, if not this, what else could it be? I'm hoping to haul the alternator and whatever else out there and get it going without having to drive back and forth for more stuff I need. I can always return stuff I don't use. Probably I'll throw a new battery in it as well. But after that, anything else I should be thinking/ready for?
View 4 Replies
Advertisement
for some reason my battery light flickers when im driving regular and on the highway. I have had both batteries checked and they were at 50 percent charge and both were good so therefore I assumed it was my alternator. I removed alternator had it check and it passed all test. Everything was checked at o'reilly and autozone
View 8 Replies
2005 F-350 6L diesel .... Put new batteries in it a week ago.
Been running good then the radio quit a couple of times. It came back on after truck was restarted. This morning I go to town and the battery light comes on. I stopped and started about 5 times and on the 6th it wouldn't start.
I got a boost and started home it , started to try and quit when I was almost home. Was so dead the power windows wouldn't even work. Have it on the battery charger now and it starts right up but the battery light is still on and the ABS light is on.
View 6 Replies
I would like to know what's happening, it seems as if idling for a minute to let my transmission temperature dial raise past the lowest line on the dial fixes or at least drastically reduces a couple issues.
The truck will deliver power much smoother off the line. I've been concerned about this for a while. The degree to which it happened wasn't constant but it seems like the truck is having trouble grabbing on (so to say) to the power coming off the line. I sort of liken it to a rope. When I give it the beans the rope goes forward but it takes a half a second or so for the truck to "grab" on to the rope. Never hard shifts, it's just delivering the power off the line or from a near stop.
Idling for a minute seems to fix this, power delivery is smooth off the line. Transmission dipstick was nice and pink but smelled slightly burnt. This is with the engine cold overnight. Didn't have time to do multiple wipes or check in the handbook for the proper methods of checking fluid, I just pulled it out quickly to take a look before heading out. Fluid covered the whole tip.
Second issue that seems to be fixed is that the battery light doesn't come on nearly as much and not for nearly as long. Typically the battery light will come on and off seemingly on its own whim during the drive. However, it seems to stay more consistently off if I idle right after startup.
Now bear in mind I baby my truck, I don't rev it high right after startup. Just low enough to cruise around the parking lot until I hit the road then I accelerate up to 40 - 60 depending on my route. I'd gladly give it the minute to warm up in the future but if I could get down to the bottom of this that'd be preferred, I doubt this is required behavior.
I do realize that these issues are not tied to startup behavior but I find it interesting that idling for a minute at startup to let the transmission gauge rise seems to mitigate these symptoms.
View 1 Replies
TBC fault has been showing on my 2006 Ford F-250 for a couple of years dealer said it wasn't an issue--- check engine light has been on for months, then lost speedometer back in November. Intermittently radio and fuel gauge shut off while driving--- stared needing a boost in really cold weather for the last month.
Driving today my battery just died while driving and I had the truck towed to mechanic--- they put new battery in and ran electrical diagnostics. Saying that it might be timing chain/cam shaft OR electrical components for computer system... I'm lost and so are they and don't want to spend thousands while they diagnose the source.....
View 6 Replies
My truck ran and drove then I changed my Steering Gearbox. After all that, I went to go start it, the trucked cranked and the batteries died. Hooked up the charger then and nothing, No start no crank. F250 2006 diesel 6.0 ...
View 14 Replies
I have an 03 with a 6.0 diesel, going down the road and started losing power and then died. Won't start, and I don't have a scan gauge. Several sources said ipr valve, and from videos on youtube I thought may be a good place to start. I bought a socket and pulled the valve, to check the screen. There is no screen whatsoever on the ipr. The oils clean, as I had changed it about 200 miles ago, and I ran a magnet in the hole looking for a screen, couldn't find anything so I used my fluid pump in the hole. No trash, screen or anything. Do some ipr valves not have screens? What would be my next step??
View 2 Replies
2002 F-250 SD V10 Auto Trans 140K miles.....
Engine ran fine until battery died. Vehicle then sat from Nov to May with no battery in it. On start up now after install of new battery, engine initially surged at idle and seemed to miss (run rough) in gear/under load. No CEL or codes. After a single short drive idle and running under load seemed to have improved a bit, but not yet back to what I would call normal.
QUESTIONS:
Is this simply a matter of the computer having to relearn after battery disconnect?
Will driving restore things back to where they were/should be?
How much driving/How far?
View 7 Replies
2003 E-550 7.3L with IDM codes clear all code, do in injector buzz test P1276 and P1275. Start truck and SES light comes on. shut off truck code IDM code go to KOEF and have P1272, P1273, P1275, P1276. just replaced valve cover harness ohm wires to IDM put new IDM in. Truck shuts off while going down highway, turn key off then back on an usually starts on it own ....
View 5 Replies
Had an issue with the negative cable n had to replace the bolt n nut. Since then its been making weird noises under the dash n under the hood even when the key is off. Sounds like something moving around under there almost but i know there is nothing. Also making buzzing noise every 30 minutes or so for a few then stops. Separate noises n 2 separate issues tho
View 4 Replies
The truck I'm working on is a 2003 f550 with a 6.0, and 382000 kilometers. My service truck died on me couple days ago, while running. As I rolled to a stop, I noticed that my temp gauge on the dash dropped to cold. (Truck was hot). Tried starting, and I have a crank, no start situation.
After towing it to my shop at work, I hooked it up to my scanner, and found that the pcm will not communicate with the scanner (otc genisis). I have no injector buzz with key on, wait to start light comes on for an abnormally long time. I have 48.3 volts on the ficm,(4 screw), and haven't been able to find any chafed wires as of yet.
View 1 Replies
In my 2014 F250/6.2, if the truck sits unstarted for 10 - 14 days it will usually kill the battery. I mean dead enough to not even power the dome lights. Do the various modules in these trucks draw that much that it would cause this? I'm getting ready to install a couple of 5 Star tunes in the truck. But if I need to take it to a dealer for some warranty coverage for this problem I'll hold off. There's never been a tune in it to this point and I don't want a warranty claim denied for that reason.
View 14 Replies
When I hook my battery cable up to my battery when negative cable my truck automatically starts turning over without the key in it what could be the problem
View 1 Replies
I bought a 2005 F350 in January of 2012. At the time of purchase, I noticed that the truck seemed slow to turn over. I talked the dealer into installing 2 new 750 CCA Ford batteries at the time of sale.
I have put less than 7,000 miles on the truck since the day I bought it. In August of 2012, I went to start the truck and the batteries were completely dead. I charged them, started the truck, and the next day the truck was dead again.
I took the batteries out, and took them to the dealer. They replaced both of them under warranty. They said that after they charged them, each tested at less than 85 CCA.
In July of 2013, the same thing happened. I used the truck one day, and then the next day the batteries were completely dead. I had them tested at the dealer, and the passenger side battery failed the test. The driver's side passed. They replaced the passenger side under warranty, again. This time, they also cleaned all battery / ground connections and tested the charging system. Everything passed.
Last week, I went to start the truck. Same thing again. Took the truck to the dealer, and both batteries, after charging, failed the test. They replaced both batteries under warranty.This time, on each battery, the dealer had written with yellow paint pen on the batteries AND on the radiator shroud "BATTERY NOT UNDER WARRANTY."
I asked the dealer about this, and they said that since they have replaced 5 batteries in the truck, and since it has 152,000 miles on it, the warranty is no longer valid. I argued that since they have checked the truck thoroughly, and found no issues with the charging system, they can't void the warranty like that.
So, what is the reason why the batteries would fail like that, and that frequently?
View 7 Replies
I've got a '03 F250 7.3L 4x4 (not sure how much info you need) with many many miles. My battery light came on a couple of months ago. Replaced a battery. Light went out for a day. Checked and replaced the alternator. Light went out for a couple days. Cleaned the battery terminals for better connection. The battery light is off when I first start the truck, but depending on what I've got turned on, lights, radio, AC, the battery light comes on with in 15 to 30 miles down the road. I had the batteries and the alternator rechecked yesterday and everything seems to be charged and charging.
- Should I replace the wiring to the alternator?
- Are there any fuses I should be looking at or for?
- The alternator is a rebuilt one from Autozone, should I get a new one?
View 1 Replies
Battery light came on today, I figured were in need of replacement so I got new ones. Light is still on, until I reach about 1800 rpm. It goes out until truck idles down. Can an alternator do this? I always thought when they went, they went.
View 14 Replies
The battery light is on when running. The light is dim at idle. Light is bright when driving with rpm's. The battery voltage is 12.8 per my older volt gauge. Alternator out put is 14 volts at idle and with rpm (2,000) +. I had the Alternator checked at AutoZone in there parking lot. Meter hooked up. The alternator passed all test.
View 4 Replies
The manual just says it's a charging system problem.
View 8 Replies
I have a 2001 250 Super Duty. I am having an intermittent issue with the electrical system and transmission. I don't drive this vehicle very much so it sits for 7-14 days at a time.
Previously I had the od light flashing and had the transmission solenoid replaced. A few weeks ago I decided to drive it to the corner store. As I arrive home the od light starts flashing and the transmission starts shifting funny. I pull into my parking spot and turn the truck off. I sensed the shut off was weird so I tried to start the truck. NO POWER! None! I go back to the truck a few days later and it starts up without an issue.
Approx. 20 miles later it starts again. This time I have to jump the battery. I ran the truck and it drove without issue. Again a couple weeks later it starts in again with the light flashing and electrical dying. What it may be? I'm probably going to get rid of the truck as I can;t justify to myself to keep dumping money into it.
View 5 Replies
I was sitting at a red light and accidentally let out on clutch and stalled truck. The clutch petal hit the floor and I had to pull out of gear. Petal will come back up if you get it started up with foot but cannot change gears when running. Changes thru gears easy when not running.
View 4 Replies
I have a 99 f450 and the od light flashes when the truck is in low range. I have to shut the truck off when I put it back in high range to get it to stop. It won't flash again till I use low range again. whats going on?
View 1 Replies
