Golf IV / Jetta IV :: 1998 - Grinding Noise While Driving
Jun 19, 2014
Car Spec : VW Golf IV 1.6 SR 1998
Problem : I have a strange grinding noise coming from the front of the car. I can only hear it if all the windows are shut. The noise starts when the car starts moving, Doesn't matter if its in neutral or not, clutch pressed or depressed. The noise is there even if I switch off the engine whilst the car is still moving. It goes away when the car stops.
Yesterday I noticed that if I move the gear stick from left to right OR right to left in the neutral position (while the car is still moving), the noise increases!! What could be the potential problem? is it related to transmission? brakes? or wheel bearings?
View 1 Replies
Advertisement
OK so my 02m goes into to all gears but when I try to take off it makes a grinding noise and kinda feels like it wants to start hoping. The car set for about 2 weeks and didn't have a problem with this at all. I can also shift the car into gear when started and not push the clutch in.
Car has a fx400 clutch with billet flywheelsl
View 24 Replies
So I have the well known starter grinding noise since I bought the car six months ago. Is there really any danger to the flywheel or the starter itself not fixing this? I don't mean from a purist point of view, of course it's not good. I don't really care about the noise. Does it maybe 1 out of 3 starts in the cold. Are things really getting chewed up, or it's really no big deal.
View 13 Replies
I've noticed recently that on startup I'll hear a minor grinding noise after the engine has kicked over. Seems to happen more when the car is really cold.
View 24 Replies
2000 GTI MK4 200,000 miles
I have had a grinding noise during engine start up for a few month but had no problem is engine starting up so left the grinding noise problem untouched.
About two days ago both lowbeam headlights blew up and left signal blinker on headlight lamp cluster didn't turn on while rear left blinker blinked at twice faster speed. At the same time I began to have starter motor stall while starting up the engine!
Wonder if this is a problem involving solenoid as well.
View 10 Replies
Have had this grinding noise going on with my 2001 gti GLS 1.8t, the cam chain tensioner has been replaced recently. Would really like to get this solved and fixed, car has 81k miles.
Found this video on youtube, same model and exact same noise as mine : [URL] ,,,,
View 3 Replies
My car will start the first time just fine but if I turn it off it won't start anymore it won't even attempt to crank ...
It does have a nasty grind noise before it starts tho idk if that could be related to it or not ...
View 3 Replies
Just started the other day. Ecuador codes at p030p035p0411. The noise only happens while accelerating past 10% throttle in any gear.
[URL] ....
View 1 Replies
This just started on me not even an hour ago. I hit my switch and the window will go down all the way and the motor will continue running making a grinding noise until I hit the switch again. Same as when it goes up all the way. It stops at halfway and makes the grinding noise until I release and press the switch up again. Is this just the motor teeth going bad or are the cables getting frayed out possibly? Haven't had time to tear down and inspect yet.
View 4 Replies
I have an issue with the 02 1.8t (wife has an issue). We recently took our car in to get some service work done and the mechanic informed me that he thinks the tranny is starting to go and just baby it....Fast forward a month the wife is driving the car, she said at around 40mph 2k RPM and the RPMs just drop after hearing a screeching/grinding noise....
Then she tried to apply throttle and it redlined...She said it would shoot up in RPM and not go over 30mph, she used the triptonic to get home and was able to get up to 45..Sat for a bit and I drove it, everything seemed ok..Shifts good, stops fine, no weird noises, etc....
Car is a 2002 Jetta 1.8t w/ 148k miles, regularly maintained, never had tranny oil flushed..
View 2 Replies
A grinding/crunching noise recently started happening to my 2001 vw vr6 12v.seems to be coming from the front of the car but only when i accelerate. I hear it through all the gears and am a little concerned as winter is approaching.
View 1 Replies
2000 GTI
260,000 miles (60% highway)
2.0L 4cylinder AEG
All stock.
I have a new issue developing on the clutch of my car. When I fully press the clutch pedal to change gear, I hear cacophony of grinding, hissing and whirring noise, probably coming from gearbox. When I take my foot off of the clutch pedal completely, the noise is gone. half clutch has reduced amount of these noises. I had this symptom briefly one night two weeks ago and when I topped up oil, this was gone. Tonight, it is back.
View 10 Replies
noticing a few issues with my 2003 jetta 2.0 when driving/shifting....so first main thing I noticed is when shifting from 1st to 2nd gear often times it will make a grinding sound and not shift smoothly from 1st to 2nd....you have to do it real slow/gingerly ...if I short shift from neutral to 2nd its fine or if down shifting to 2nd its fine...I have changed the gear oil...other sounds idk if its my tranny or engine but if going up hill and you throw into 3rd and not going fast enough its makes a rattling sound and is sluggish I know its a old car 177,000 miles so idk just curious if this is a sign of problems?....Last thing after driving and getting home and putting into reverse gear to park it makes a noise like a chugging sound when reversing and can be finicky going into reverse.
View 1 Replies
I have a problem with my golf 4 window. RR after washing it the window wouldn't go up again it just made a grinding noise inside but no movement when you press the switch, I watched a few videos on how to open the panel and I did and found this wire lying around like this I don't know what to do from here as the car must go for a test for registration and they check the windows. do i need to buy the entire back panel?
View 2 Replies
My 98 s-10 2WD 4 cyl with 135K miles has been making this grinding noise in the rear. Sounds exactly like grinding from really worn out brakes.
video 1 with wheels on [URL] ....
video 2 with drums off [URL] ....
I can't tell where it's coming from. Both sides equal so I'm suspecting differential. Shop looked at it and came up with bad U-joint and recommended differential service. I fixed the u-joint. Fluid level ok in differential.
View 14 Replies
So I drove my car (2000 vw golf tdi auto) to work fine. When I started it to drive home, it squealed and then all of a sudden stopped squealing so I popped my hood and looked and the belt can fit 2 fingers under it. Is there anything I can check diagnose this? I hear it could b a tensioner pulley.
View 2 Replies
I have an issue that I have yet to figure out. While the car is in motion there is a rumble from what sounds like the front driver side. I've replaced the wheel bearing and CV axle already. The noise seems to have gotten better but its still there. The noise will worsen when turning left and pretty much disappear when turning right.
View 2 Replies
I own 2001 2.0 Golf (first car) and lately as I drive I constantly hear this noise, it's very obnoxious, sounds like a washing machine going with a hard object in it. It's not continuous, but it doesn't happen rarely. Whenever I go over any bump, the slightest crack etc. I'm guessing it has something to do with the suspension? I'm not really sure since I'm still learning about cars...
View 1 Replies
I have a '98 5-Speed Corolla. If I rev the engine when the car is in neutral and warming up I hear an odd grinding noise when I let off the gas and the engine goes down to idle. The noise does not occur if I put my clutch in. Is this something to worry about?
Also, I'm wondering what CV joints sound like when they're failing.
View 1 Replies
I recently sold me 91 F-250 and got into a 98 F-150. It's a SuperCab 6.5' bed, 4x4 off-road, 3.55 gears, 5.4 v8 auto. I love the truck, but I am having an issue with a noise at startup.
Every time I start the truck it fires right up but it makes a grinding noise AFTER it starts for about 3-5 seconds. I thought the starter wasn't disengaging in time so I replaced it. The starter I took off was fairly new. It's teeth had just a little wear and the flywheel had no visible wear. I put in the new starter and there was no change at all.
I also changed the oil and filter using Motorcraft 5w-30 oil and a Motorcraft filter. I also started it without the serpentine belt to rule out a pulley bearing. What the noise could be? The truck runs absolutely excellent, by the way.
View 5 Replies
I have a '98 Accord. It's got some issues and I am in the process of buying a new vehicle. But need to have a driveable car for work in the meantime. I have a torn boot on the front passenger side. Front brakes are also pretty worn down, not mention the Cat converter is shot and rusted. I'm getting a very loud, grinding noise when I turn to the left. Very loud noise. Some noise when turning to the right but not nearly as loud. My mechanic looked at the car a week ago and told me too many problems to fix the car, get a new one. which I am but it's taking some time. I'm just wondering if you think the car is likely safe enough to continue to drive until I get the new car. It's the loud grinding noise that freaks me out.
View 2 Replies
