I'm having some electrical issues with my 04 jetta and have no idea what is wrong. This came up recently after changing the solenoids in my 09A tranny (side note: tranny works now ).
[URL] .....
I have a 2000 Golf GLS which I tried to replace the shifter solenoids on and since I replaced them it shifts very very incorrectly it almost feels as if it starts in 4th gear and works its way to 1st.
View 2 RepliesI was out of town for about a week. I drive a 2008 Prius with about 35k miles and no previous issues. I get back tonight and go to open the door with keyless entry. Nothing, doors wont open. I hadn't replaced the batteries in the remote since I bought it, so I figured it was just that. I use the key to manually open the doors. I then go to start the car. Nothing. No lights, no noises, literally nothing happens. I figure, perhaps I left a light on while I was away and the 12V battery is drained. It is quite the rare thing, but it has happened a few times in the past. Usually I would catch it the next day and be ok, so maybe a light was on for a week and that did it.
So at this point I assume it's just a dead 12 V battery. I ask my friend to give me a jump. We open the hood, connect up the jumper cables in this order : + Prius, + and - to his battery, then - to the Prius frame. Quite a few sparks fly, which seemed like more than what I was used to seeing, but it doesn't seem too outrageous. I try to start the car and nothing happens. My friend then tells me he accidentally hooked up the jumper cables backwards. (I know now this is bad, and may be the source of the problem but hear the rest of the story to get a complete picture of what's going on).
So we swap them on his battery and try again. I put my foot on the break and push the power button. His car is still running in the background. The power button LED then turns green, and that is it. No noise or anything else. I then (while keeping my foot on the break still), push the power button again. This time the power button LED turns orange, the parking break P LED turns on green and the check engine light on the dash turns on. Also I think the car also makes the normal humming sound we are used to hearing when it turns on. No other lights are on at this point. The main display doesn't come on, nor does the interior lights work, or anything else for that matter.
The only thing functioning from inside are those 3 lights. I turn the car off and we just figure it needs more time to charge. So we give it a few more minutes of charging and still the same thing. We notice a strange thing. We hear a clicking sound coming from the fuse box area of the car. Every 5 seconds or so, it sounds like a relay clicks, and then clicks off after 2 seconds or so, and this continues on. My friends engine sounds as if during those two seconds like it is sending current to my car (lower engine rpm). So it sounds as if the relay sends current somewhere for a few seconds and then no current goes to my car, 5 seconds later it sends current to my car then 2 seconds later no current, etc. This goes on continuously and we are not sure why.
We figure maybe a fuse is blown. My friend checks the fuses we think to check but can't seems to find anything wrong there. We then think maybe the power needs to be disconnected to the electronics to allow capacitors and what not to discharge. So we disconnect the lug from the jumping terminal (the one we connected the + jumper cable under the hood) for about 10 minutes. We reconnect the lug back 10 minutes later and try again. Same things with the lights and buttons pushing as before. The only difference this time is you can get these lights to turn on without having the jumper cables connected (as if some of the battery was charged).
Next we figure, maybe we just need to hook directly to the 12V battery in the "trunk". So we connect to that. Now, instead of having the relay tripping every few seconds we don't hear the relay tripping at all. And the engine rmps are operating constantly as if it is consistently drawing current (constantly lower rmp sounds). So that is different this time than when we connected to the post under the hood. So we continue running the car at high rmps for a few minutes and try again. Still the exact same thing with the lights.
Also during these tests the break pedal seems to put pressure on itself when you hit the power button a second time and the lights turn on. (This is just a detail to include, I'm not sure if there is anything useful to gain from knowing this). Anyway, I know the problem is most likely that everything was fine until my friend accidentally hooked his end of the jumper cables to his battery. But in the event that there is something else I should check.
Both left and right tail lights don't work but brake lights and reverse work fine. Fuses look good and bulbs are fine. Could it be related to the 'circuit board' type housing that the bulbs are in? If it is, are they in series meaning if one goes bad the other side won't work either?
View 1 RepliesI was given a Taurus wagon a 2000, Taurus wagon and it has some electrical problems.
The rear hatch is a mess, the center tail light left, right hatch brake lights and backup lights, and automatic lock all seem to be out.
I pulled the two panels off the pillars and the first connection inside the car look nice and connected. inside the hatch it appears as if all wires are connected.
is there a central point where all of these lights and locks meet that can be disconnected.
Everything else in the car seems to work.
oops forgot rear speakers are not working either.
I have a 2003 1.8t awp head that needs replacing but can't find one with that exact code of awp! My question is can I just buy another 1.8t head with a different code?
View 4 Replies My car is a 2.0 AEG manual for reference.
So, my alternator died last night and when I changed it this morning, I fired her up and now when I turn my light switch one click I can see my high beam light illuminated on the dash. If I have the switch on any setting, it's illuminated but no lights are on out front except the dtr lights. Turn signals work fine and so do the brake/tail lights. I checked the fuses for both low/high beams but they were fine. I saw someone mention an ignition switch while I was searching but I'd rather get other opinions whether it is that or not.
Edit: My original test drive the car ran fine minus the headlight issue. But upon driving it through the city when I was coming to a stop at a redlight the battery light came back on and it died. It fired right back up and barely made it across the street to a parking lot before it died again. It'll fire up but won't stay on. On my way to an parts store for charging system check.
So I have a 12v vr6 jetta and I really want a better exhaust with a nice clean and loud growl. My friend has a mk5 with a full Apr exhaust that sounds absolutely amazing and I want it to sound like that and I am willing to change my rear valance to the later mk4 jetta style if needed.
View 3 RepliesI own a 2000 Jetta auto with 200k on it. I have the same problem. It wouldn't change gears till 4000 rpm i scanned it. And got the cods g38 and g68. So I changed both. It was working fine then again same thing it works then stop works. So scanned it again and got same codes changed them again worked fine then stopped working so I took it to vw and they told me same thing same sensors and the wire harness so I changed them again got the parts from VW this time. It was working then stopped. And when I turn on the car and drive my gear box display goes all black for at least 10 min driving then goes back to normal. But sill doesn't change gears. Now not even after 4000 rpm. Ps. When I do it manual 1st gear 2 and changes fine once I put it on drive doesn't not change gears.
View 7 RepliesI know it's just one bulb behind the fan speed control knob. I also know (or was told, rather) that the lighting color is red because of some red plastic doo-dad. What I don't know is whether or not this plastic is red because of a film or coating applied to clear plastic or if the plastic itself is red.
I work at a graphics shop so I've got translucent vinyl film in various shades and tints of blue. If it's a film or coating applied to clear plastic that makes the lighting red, I could probably remove it from the plastic and apply a blue film. I'd really prefer not to take apart the dash to remove the HVAC controls only to find out that I'm stuck with red lighting.
Reprogramming my key for my 1999 mk4 jetta. Recently the battery died on one of my key fobs and the other fob that i have has been dead since i bought the car. i put new batteries in them both now. I have one flip key and the only other key i have is the valet key. How I could re program my fobs?
View 2 RepliesI recently changed my battery and now my auxiliary doesn't work. I have read that it's simply changing a code with program. Vagcom-(VCDS)
View 9 RepliesI recently replaced the whole head and head gasket on my 2003 jetta 1.8t and it is still overheating so I have to replace either the thermostat, cooling fans, timing chain, or water pump. I have $700 and they said they can fix it for that. So should I spend my $700 and hopefully the problems go away or should I just try to sell the car as is and try to squeeze as much money out of it as i can?
View 7 RepliesGot a 02 Jetta 1.8T 5spd auto tiptronic with 100k miles. Having issues with shifting. Trying to determine if its electronic or mechanical. Had a short in solenoid 10 N283 which melted the TCM. Put in a used N283 to see if the trans is still ok mechanically. Plan is if its ok to put new fluids and solenoid pack. What do the experts think does is need a full rebuild or will new electronics do the job?
After putting the used N283 solenoid the trans works but not correct. The problem is in the shifting only. Feels like its out of time. When you start moving from a stopped position from 1st to 2nd the car takes off good but when changing gears it reves and feels like its slipping then it hits hard into 2nd. Then 2nd-3rd is a fast shift and not hard. 3rd-4th slips and revs a little then changes gears 4th-5th is fine. all down shifts are fine. Does not mater if the car is hot or cold its the same.
If I disconnect the MAF 1st to 2nd shifts fine with no problems. 2nd-3rd little rough but not bad. Problem with disconnected MAF when going in Drive at 30-40mph all of a sudden it jumped into 1st gear and felt like I was slamming on the brakes.
With the MAF connected and I shift manually in tiptronic mode each gear runs real good with no slipping at all. But same problem happens when switching gears. I can drive it smooth if i accelerate to 3000 rpm and then left off the gas a little and it shifts fine.. Same with the other gears.
I got a used TCM to rule that out and the problem is close to the same. It tries to shift at lower rpm but still does about the same problem. I did recently had a MAF go out. Put in a new bosch and no change. Did my VCDS scan and only codes I get is "17840 secondary air". I can get operational data on some solenoids but not sure what parameters to look for.
I hear this most days I get home after my drive home from work. What this might be? (Video included)....
View 2 RepliesI have a 2002 Jetta TDI Manuel. New to me from brother. While there are some issues I can deal with ....soft touch turned to goo, etc there is one thing I am worried about.
He said the lights(all electrics) will go out intermittently. Head lights, turn signals, radio, interior lights. He says the car runs fine while the electronics are out (except no headlights). Usually only happens for a few seconds but occasionally will last minutes. Longest it has happened is 10 minutes and the lights all come back on by themselves.
What could cause this and what needs to be done for fixing? He is a outboard mechanic and has kept the car up great, but he doesn't like to mess with wiring/electrics. I'm sure he has checked the basics.
So I changed transmission fluid on my 1.8t GLS because I was having difficulty shifting out of gears on cold starts. It seemed to work fine for a few days and now I'm back to square one, it still doesn't want to shift correctly!
View 14 RepliesI am having problems with ALL my driver door electronics, except the fuel door. my passenger side works fine, sunroof works fine. Ive removed the door panel to look for obvious problems, like broken wires.. Fuses are good, looking for a good place to start. Power winder/locks.
Little update, i reset my battery and they worked, waited like twenty minutes, nothing works again.. why would i have to reset the battery every time for the windows to work?
My car shudders (headlights flicker, dash lights flicker, and car feels like it's choking/almost stalling) when I sit at an idle. Today it got super bad and the abs light flickered on and off when ever it would "shudder".
Live in so-cal where we just had heavy rain the last 2 days so I'm thinking it may be a wet ground somewhere but I'm not an electrician so I wouldn't know for sure.
Car info: 2.0 golf
Nothing done to it except straight pipe and intake...
2003 Jetta GLI 2.8L 24v VR6 .... Last night I went to a friends house, everything was normal on the way there, probably 35-40 degrees out. When I got to his house and shut off the car and pulled the key out the power died (clock/trip meter reset) and the alarm started going off. It has done this before once or twice but I could never figure out what it was and it was never really an issue except for the clock resetting.
Jets won, went to leave and the car wouldn't start. It was raining gently at the time but the car has weathered worse. I replaced the battery ~2-4 months ago so it should definitely still be good. Jumped with my friend's car, started on the first try. I let it sit for a bit then we were on our way.
1/4 mile away in the middle of an intersection the car died, power steering, everything, and I had to drift to the other side of the road. The person across the street from me was a cop and it was 12:30 in the morning but he was gone before my car died. I have been driving 5/6 speeds all my life and I know I didn't cause the stall out. The dash lights flickered and dimmed. I shut everything off and then gave it a try and the car started right up. Revved the engine a few times, reverse and drove away. It was fine the rest of the way home.
The battery connections are tight. The car has started every single time up until now with the new battery. My old battery did leak some acid on the copper connectors and into the main positive power cable but I neutralized all of it and cleaned it off and it looked fine except for some pitting on the outside of the terminal clamp. The car is mostly stock except for the exhaust but that was years ago.
Current Battery Voltage: 12.37 ... I just started the car for the first time this morning and it started perfectly. started @ ~1200 and then settled down to ~800rpm after a bit, it usually does this when its cold out. No codes have been thrown.
This is for a 2003 GTI, 89,00 miles. Every time I try to use the windshield cleaner the fuse blows for the windshield wipers. I have tried to put in a 25 amp fuse and it worked for a while but still blew. The windshield wiper motor has been replaced.
View 2 Replies