I'm trying to figure out why I am having problems with my read tires wearing fast. I knew my car was out of alignment and took it to a shop and they told me I have -1.05 negative toe and bad camber.
Can some shims fix my issue or would I be better with a whole new rear beam. As far as I know the car has never been lowered, but how would I be able to tell?
About a week ago I had my car on a hoist getting new exhaust tips installed. At that time I noticed the rear tires are wearing prematurely on the inner edges. So are the fronts but not nearly as bad as the rears. I asked around and was told that this is normal for the factory Pirellis because of the negative camber built in to our cars. This being the reason the car corners so well. I understand the physics of this and I really like the way the car corners. My question is this---Can the negative camber be taken out of the car thusly reducing wear on the inner edges of the tires?? And how much will this be noticed while driving the car normally, and during spirited driving?? I have noticed that some fellows will purposely mod their cars with increased negative camber on the rear wheels, I'm assuming this is to achieve a certain "look".
View 5 RepliesThe front and rear driver's side tires are wearing on the outside edge. Searching about, I find that camber problems are indicated with outside edge wear -- but....
View 19 RepliesMy front tires had previously been wearing out a lot faster on the inside. I was told it was due to the front lower control arms, does this sound right? Is it possible and cost effective to just have the bushings rebuilt (replaced) or will i have to buy new control arms. How can I tell what my car actually needs? I just put 4 new tires on the car and am weary of driving it until i get this fixed.
View 11 RepliesI do 98% of my driving unloaded and almost never tow. (Kinda weird for an F350 huh) I know that the truck recommends going with 65psi front and 80psi rear but the rear tires seem to not be wearing evenly across the tread pattern. The edges still have the little rubber stubs sticking out of them even after almost 3000 miles. Should I be running a lower tires pressure in the rear when empty or should I just let tire rotations take care of the uneven wear. If I should air down, what pressure would be recommended? The front tires are wearing normally at 65psi and they have more weight on them then the rear.
View 14 RepliesMy original 17" Toyo tires are noticeably wearing out after only 25k miles and it appears to need replacement soon. I can probably drive for another 5 to 8 k miles but the edges may be bald by then. I looked at the Toyo replacement tires and the exact ones are actually quite expensive which means they may be in the performance tire category. For a Prius v (lowercase v for the Prius v wagon), not sure this vehicle warrants this type of tire. I will be looking for a longer lasting tire for replacement and not necessarily performance tires.
View 5 RepliesMy budy took his touareg to the dealer today because his front tires are wearing funny (cupping). The dealer said that is normal for the touareg. I am having trouble believing that.
View 8 Replies'02 SC430 with just over 30K miles. She is wearing out the inside edges of the tires. We have had the car aligned twice in our one year ownership. Are these cars prone to this kind of wear and/or going out of alignment? Would this be a spring/shock/strut issue? I assume the original components are still on the car so maybe she just needs replacement parts due to age. She has low miles, but she is 11 years old now.
View 14 RepliesI have about 20,000 miles on my elantra gls with the stock 16" wheel.
I was measuring my tire tread and noticed that the outer groove of all 4 tires is down to 3/32 tread depth while all of the middle and inner grooves have about 5/32 to 6/32. My car was aligned about a year ago. Tires rotated every other oil change, i do oil changes at about 3,500 miles.
I drive pretty conservatively, though the street in front of my neighborhood is 50mph and has heavy traffic, so I have to take an aggressive about half the time I pull out of my neighborhood.
i have noticed that my front tires are wearing quicker on the inside. that is to say they don't seem to be wearing evenly. have almost no tread left on the insides of front tires and these tires only have about 13000 mi on them. is this and aligment problem? dealer says no.
View 4 RepliesMy 18 inch Conti Contacts have approximately 20,000 miles on them. The tires are not wearing evenly and have excessive wear on the outside portion of the tires. The dealer says that they spoke with VW and VW says that it is "normal" for the tires to wear this way because of the "turning radius" of the vehicle. I smell BS. I don't know much about this subject but it would seem to me that the tires should wear somewhat evenly if the vehicle is balanced and aligned properly.
View 6 RepliesI have a 2010 fx 4 cew cab that has a 2" lift on it. I am new to the truck scene, but my wife has always wanted a big truck. I have pro comp tires that are 35 X 12.50X20 LT. They are the Pro Comp Xtreme A/T. The truck is driven evry once in a while and it is never off road. The issue I am having is that the tire wear is really bad and uneven in the front. It has been aligned 3 times in one year and the balance has been checked. I had the lift kit done at the dealership and they are saying this is normal and that the wear is due to not rotating the tires every 3000 miles. If the truck was driven every day I would understand but it only has 10,000 miles on it. Is this normal? The wear looks like a shock could be bad but they have already replaced the shocks about 3 moths after i purchased the truck.
View 14 RepliesI have an 04 ranger with 31x10.5x15 mud tires on it and the front tires are wearing on the inside real bad if you look at it the tire look tilted in on the tops...
View 1 RepliesI have an 04 ranger with 31x10.5x15 mud tires on and the front tires are wearing excessively on the inside edges any
View 2 RepliesI have a 02 Prius and the driver's side brakes are wearing twice as fast as the passengers side. Some times if I have to stop quickly the brakes pads continue to apply pressure on the rotor when the brakes are released. After a little drive they seem to go back to normal. Is this a sign of a bad caliper or master cyl.? I know before I purchased the car the front brakes and rotors were done, but they used after market parts
View 5 RepliesI been at this for weeks and just cant figure this one out. My daughter came home from college and her 1999 MK4 Jetta with 2.0 died in the driveway. It would start then stop just as fast. I scanned it and got a list of ground faults and a fuel pump relay fault. I took the next step and jumped the relay out. The car started right up and drove with out any problems. So I ordered a new relay and awaited to finish this easy repair. Since then I have tried the following.
- A dozen relays from various sources.
- New relay panel.
- New ignition switch.
- New Fuel pump.
Having a problem with stock tailights always burning out? Recently I've noticed that I've had to replace my passenger side one twice in the last 3 months and my driver side one twice in two months. It doesn't seem to matter if I use GE or Sylvania bulbs so I'm guessing it's the cars fault.
View 24 RepliesI just changed all my flex lines to stainless steel and my pads and rotors were replaced. I had some issues with calipers dragging. I used a power bleeder to bleed the brakes all the way around. Now my pedal feels really weird. If I push the pedal fast it brakes hard then it goes to the floor. If i just push it soft, it will just slowly go to the floor without braking at all.
View 3 RepliesHave a question when I shift slow from 2nd to 3rd my o2j tranny doesn't grind but when I shift fast from 2nd to 3rd it grinds it happens starting at 3000 Rpms thru 6000 Rpms. It also doesn't happen when I shift from 4th to 3rd. Have performed a tranny fluid change. Along with replacing the clutch at 1500 miles ago. The engine is AWP.
View 4 RepliesI have a 2001 VW Jetta 1.8T manual transmission... I just purchased it...upon starting it up, it runs fine... After I have run it for a while, it gets a distinctive, constant, pretty fast ticking sound near the engine...
It's hard to pinpoint where it is coming from, but it seems to be coming from the right side of the engine or from an EGR valve?
It only makes the ticking sound AFTER it has fully warmed up and i have driven it awhile...and only at idle...if i rev up the engine, it goes away instantly...but starts again when it idles...
Driving a 2003 GTI
My girlfriends dad and I just recently replaced my pads,rotors, and bled the brakes. He is a journeyman mechanic however he does not see a lot of cars, he mostly works on trains.
Short version is after this replacement I am able to press the peddle to the floor and not lockup or engage the ABS. Before with the old worn brakes this would be no problem to do. We tried bleeding a little more off the brakes to see if there was some air. no bubbles came out. he insists there's lots of brake power. I just find it odd that i can press the pedal to the floor board and not lock up the tires, or feel like i have any real emergency stopping power.