Shifter seem like it is way too loud going from gear to gear? Just holding in the clutch and rowing from gear to gear...seems way too loud, Seriously sounds like shifting gears in my old 5.0 mustang.
View 1 RepliesI know it will get a little notchy when its cold out, but shifting from 1st to 2nd is really notchy, and the shift box is pretty loud on that shift. I don't think its a trans issue, the noise seems like its only in the shift box. and goes away after 5-10 minutes or so, but it seems a bit excessive, especially for a new car. Car has 3500 miles on it, and has been doing this pretty much the whole time on cold starts.
View 14 RepliesNew truck 11000kms ago thats done medium amount of work but nothing heavy or sustained for long periods of time. I get the feeling of clutches slipping especially when truck is cold but also when normal temps. Doesnt make any weird noises or anything. I can really notice the difference in torque if in manual mode being much better, but still not perfect if i stomp on the gas pedal and go through the gears in manual mode will still slip. Also is really harsh shift if i come to a halt in 3rd manual mode with the brake pedal depressed push minus button the truck makes very loud clunk noise into gear 2 then 1. Took it to ford they couldnt find anything ? Thinking of trying another dealer.
View 2 RepliesI have a new GTI which is awesome, but second gear has a very loud whining noise. Very easy to reproduce: in second gear rev it up to 3000 rpm and let go of the gas. This happens only in second gear. Under a moderate acceleration or while engine braking. Should I be worried, should i have it checked? Is this normal? It is a 6 speed manual gear box.
View 24 RepliesHaving issues with sunroof. Purchased my 2011 gti last month 3300 miles later sunroof broke like a corrado .....making loud gear grinding noises ....whole assembly wants to bust out of the headliner !
View 5 RepliesSometimes when putting the vehicle into first it's almost impossible to get it to go into gear. Sometimes it's super smooth. Also when putting into reverse we hear a loud clunk. That one is most of the time but sometimes it goes in smooth. I was doing some looking around at the pedals because I think I am going to have to replace my master cylinder and noticed that on the inside of the vehicle where the clutch master cylinder comes into the vehicle it's leaking black fluid. Does that automatically mean my clutch master cylinder needs to be changed? Could this be the cause of it being difficult to shift because the clutch isn't fully disengaging?
View 11 RepliesMy 2006 Elantra (54,000 miles) shifts really, really hard when it's not cold and passes through the 35 mph range -- hard enough to make you glad you've got your seatbelt on. I've taken it to my regular mechanic and now it's in an automatic transmission shop.
My mechanic changed the fluid (twice), and took it through a "learning sequence". The fluid didn't look that bad and he reported that there were no codes to work with. He thinks I'm going to have to get a new transmission.
The AT shop has confirmed that there are no codes to work with and that the problem begins at 143 degrees. They tell me that the transmission is shifting into a higher gear without releasing the lower gear. They tried replacing a couple of solenoids, but that yielded no change in behavior. Now, they're telling me they "think" I need a new computer. I'm just afraid the trial & error approach is going to cost me a boat-load.
So I just got home from a road trip yesterday, no problems on the trip. This morning I drive out of my neighbourhood, turn onto the highway and I think to myself, that's strange, clutch feels a little notchy ... and then I go to shift gears and it won't go into gear. Any gear. I push down and it just won't engage, it pops right back up. Had to walk a mile home carrying my kid in his car seat and trailing my 6 year old little girl. Now I'm getting it towed home so I can check the engine bay to make sure everything is cool. If everything is connected and I can't determine the issue then I gotta flash back to stock and hit up VW and have it towed over there.
View 9 RepliesI am hearing a noise first thing in the morning when I leave my house and the car is shifting from 2nd to 3rd. The sound, I think, is coming from the front center of car, say directly below the radio area. The noise lasts only 1 to 2 seconds and sounds like when some tries to put a transmission in reverse while still rolling forward. A metal against metal sound of two pieces trying to mate up. I'm thinking transmission...I'm hoping center diff. There was mention of a scraching sound coming from front passenger side on initial startup. Idea was this could be Immobilizer or ABS.
View 2 RepliesI have a 2003 jetta 1.8t. Just recently it hasn't been shifting from 3rd to 4th gear. It will when the transmission is cold but once warmed up it will no longer shift into fourth gear. Just looking for some possible solutions. Going to check the fluid this weekend.
View 1 RepliesLast couple morning here in Michigan we've seen temps in the low to mid 30's. The last two mornings when I shift between 1, 2 & 3 I'm hearing a clicking noise coming from the clutch when engaging the gear. After a few minutes, once it warms up, the clicking goes away.
I am @ stage 1+ W/VWR intake, but I'm not expecting clutch troubles from that.
The DSG in my MY08 R32 is a lemon. It thumps/clunks quite loudly when shifting into 6th gear at low speed (50-60km). It seems to make the noise a lot when it's in D mode.
View 7 RepliesWhen I was driving on Friday I noticed that moving into 2nd, 4th, and 6th were "soft." I could hardly feel it engage into those gears at all so I thought maybe I would adjust my linkages. So I adjusted my linkages and while sitting in my drive way everything felt solid. When I took my car for a ride down the street I could feel it engage 1st, 2nd, 3rd no problem but after driving around for a few minutes my 2nd, 4th, and 6th gears felt soft again and then it got worse where I couldn't even shift into those gears anymore.
So my R, 1, 3, 5 all worked fine but didn't have 2, 4, 6. After taking a look at my linkages and I pulled off the selector cable and and shifter cable end. I noticed that on the shifter cable end that it felt wobbly and on the selector cable end it was rock solid. I am just wondering if the shifter cable end being worn out could be my issue? Is the shifter cable end supposed to have a little play in it and be wobbly? Or is there another issue I should be looking for? Here is a video of just how wobbly it is. [URL].....
So I have a 2.0L jetta with 160,000ish (daily driven) miles. And I'm starting to see a bit of a shifting issue mostly into third. Seems like I get locked out of the gear while shifting from second to third. I have to push it in(catches the "lock out") then I pull back and push forward again and it pops in. I rarely miss gears or grind. And I've noticed only a few times it does it in fourth as well. No grinding (unless I try to force it super hard) just won't let me go into gear.
Also while on subject of gear issues...
When I go into reverse, after the car has been sitting over night or for a longer period ( I would say between 8-14 hours) it will act up, almost like I am trying to drive with the parking brake fully engaged. In order to make it stop such bad behavior I have to rev it higher and it makes a *pop* or *crack* noise. Then it reverses just fine.
I've done a little bit of searching, "Look for a binding in the engine bay" and I have looked and haven't found much.
It seems like my 11 GTI doesn't exhibt anything impressive in 1st and 2nd gear and I fall behind other non-sporty cars when lifting off from a traffic light. But upon shifting to 3rd gear I'm zooming incredibly.
View 2 RepliesJust recently, my car 6 speed has started acting up and it's got me worried. First, and most notably, when I go to shift into 4th gear, there is a slight grinding noise and its a little tough to shift into 4th. Once it is in 4th gear, though, it shifts and drives fine with no other grinding noise. A buddy of mine says it might be the synchros, but what that means or how I can fix it.
Also, it has been having a rough idle on startup for a while now. It will idle at around 1,200 RPMs for a bit when I start it up, and it will kind of backfire out the exhaust a bit, kind of like it's a misfiring coilpack or something, but will usually go away after I drive for a bit.
Driving my car right now isn't very fun when I am only worrying about what's wrong with it, so I really want to get it fixed sooner rather than later, before these develop into larger problems.
So yesterday my car was running as fine as it always has. Then today came around...Car started fine, shifted into first and second fine, but when I hit 3rd it started to sputter in the low rpm's. Around 3000 it picks up a bit. This then continued happening through all of the gears. I noticed that the engine light was flashing for a few seconds and then went away completely. It still putters, struggles, and shakes when accelerating in the low rpms but its not throwing any codes. I know there are a few things it could be i.e. vacuum pump, bad coils or plugs, are maybe something more serious (fuel pump maybe?). I'm at a loss, especially since the car is throwing no codes (so there is nothing to scan for). I was hoping vortex could give me somewhere to start on this, I don't have a VAGcom so getting it scanned means $$$ and I want to get a start on the problem before I go that route. Here's some basic info:
Its at 182,XXX miles. Its never thrown any engine light or cel code in the 2 years 40,000+ miles i've owned it. I run 0w 40 eurpean car formula oil through it every 3-5k. I run seafoam through it every 6 months. I'm NOT sure when the last time the coils have been replaced.
Whenever I completely engage the clutch after shifting into 5th, there car bogs for a second if I give immediate throttle after shifting. It doesn't happen if I wait a second or when driving in fifth gear.
View 12 RepliesI have been reluctant to post another clunking thread because it's nearly impossible to accurately describe what is happening. But I have reached by breaking point and I wanted a few opinions before I take it into the dealer. I am still under powertrain warranty, but I want to be confident I am not wasting mine and the dealers time if I am just missing something easy. I also know dealers don't always take clunks seriously so I want to pinpoint it first.
Symptoms : Car has 50k miles. I am the original owner.
From a stop, when getting the car rolling moderately aggressively there is a clunk/pop noise from the car. I can slightly feel it in the pedals and it is fairly loud. Almost like a distant hammer and nail pounding. It's a single clunk, with sometimes a double "pop pop". It's noticeable even with the radio turned up a little. If you are smooth on the throttle it doesn't make the noise. It seems random, like something is hitting something which only happens under certain weight shifts.
It sounds like it's from the rear and the front. It seems to switch. But honestly I am not confident either way. Where it is. It is silent on turns, bumps, speed bumps, driveway, etc. I don't think it's the suspension. It is not a clicking/tapping, only a single clunk or knock.
It also happens in 1st/2nd in stop and go traffic. If you leave it in 1st and the traffic is moving from say 8-15mph where you don't need to use the clutch it will clunk during on/off throttle. Anything above ~30mph I haven't been able to replicate the noise with on/off throttle.
It also does it if I downshift when coming to a stop and don't rev match. Say you are slowing down and you go from 4th, 3rd, then 2nd, let the clutch out and it rev matches up to ~3,000rpm which causes the weight to shift forward....clunk! It is not easy to replicate which is another reason I am slow to bring it to the dealer until I pinpoint it.
Things I have tried:
- Subframe bolt torque check. Installed ECS spacer/bolt kit anyway.
- Sway bar links are tight, or at least they didn't budge at all.
- Adjusted the rear hatch a million different ways as it was making a similar noise earlier.
- Spare tire tightened, tools removed
- Rear seats up/down/mix/seat belts fastened, etc.
I was only able to locate one motor mount? Where they are. Seems fine. Dogbone seems fine, again hard to tell.
Suspect:
I have VWR springs, but I am 90% sure this started happening right before I had them installed. I did the rears myself, a well known shop did the front. I noticed the noise maybe 2k before the springs were installed.
Clutch linkage somewhere - I had issues with my transmission (early build). The clutch was replaced at 7k. I've always had a very loud flywheel and a grinding feeling in the pedal. Maybe the shifter linkage is hitting something? I have little experience with VW's so I am still learning and don't know what to check.
My rear harmonic balancer is cracking like everyone else. I have no vibrations yet and I don't see how it could be causing a clunk in the current state. Maybe a motor mount is bad that I cant see? It feels like something is loose in the drivetrain.
I come today for a apparently transmission problem. I have an automatic VW Jetta 2000 2.0 that i bought a few months ago, the car is great, has 250K miles.
The problem is in the morning when car is still cold, the transmission isn't shifting gear until 3K RPM (For 1-2 is about 2.5K RPM, and 2-3 is about 3K RPM). After 5 minutes of driving all back to normality and transmission shift gear about 2.2K to 2.3K RPM.
The question is: this is normal?, what could be wrong?.
I have two 2009 stick Focus SE 4drs (one for me and one for the Mrs.) Both are PZEV. Mine, with 66k runs great; hers, with 43k talks back when under initial load. When starting up from a stop or up shifting in any gear we get a snorting or knock in the 1000 -1500 rpm range. Once above 1500 rpm all is quiet. The funny thing is that if it is raining out, the noise does not occur. The car is also an absolute dog on any hill, putting the pedal to the floor does absolutely nothing (no knock, either) Having an identical car myself, and not experiencing these two things, I would guess that something is amiss. What might be the cause?
View 2 Replies