Santa FE SM (2001-06) :: Park Gear Selector Indicators Not Illuminated
Mar 15, 2016
Isn't the park gear selector indicators suppose to me illuminated when you turn on the lights, mine aren't. Why?? stick shift between seats on floor.
View 5 Replies
Mar 15, 2016
Advertisement
Ford F-150 (2009-2014) :: Cannot Move Gear Selector Out Of Park?
Parked truck, went to leave and truck starts and runs fine, says brake problem on message, wont let me move gear selector out of park, is there a way to do this manually and get it to neutral so it can be towed??
View 2 RepliesTouareg :: Whooshing Sound When Push Brake Pedal To Move Gear Selector Out Of Park
Last night I jumped into my Treg to move it into my garage. When I pushed the brake pedal to move the gear selector out of park, I heard a whooshing sound. Like the sound of a bellows-type foot pump I use to inflate my dinghy. I could also feel a slight amount of movement in the transmission lock button on the top left side of the shifter when doing this.
Now I'm noticing this noise whenever I apply the brakes. It doesn't appear to affect braking performance, but does have me wondering. I'll have the dealer check this out when I take the Treg in for the recent recall (got my notice yesterday).
Prius (Gen 2) :: Exclamation Point On Dash Illuminated Along With ABS And VSC Indicators
Yesterday while running errands the exclamation point on the dash illuminated along with the ABS and VSC indicators. I haven't had my Prius for very long but I kind of expected it to happen at some point as I had done the test a few weeks after I bought it and found the resting voltage wasn't all that great but it wasn't causing problems at the time. Time To Replace The 12 Volt Battery...
View 16 RepliesSanta FE SM (2001-06) :: Gear Shifter Very Hard To Move And Doesn't Really Go In Park?
This morning as I get in to drive my kid to school (2005 2.7 2 wd auto) as I go to put it in reverse I noticeably have to pull it with some force. I have never had to "force it" before, it had always switched gears with ease. This time it felt very stiff but had no issues going into gear. After I dropped my son off at school I went through the gears up and down and it felt very stiff (at this point i have no issues with starting it or P).
At lunch I go out to get something to eat and when I go to start it up it won't start. I try and try and nothing. All the lights came on, it's not a battery issue at all (brand new). But after 10 tries it starts, so I'm pretty happy. Then I go to put it in gear (reverse) I can not press in the button on the side of the gear shift. It will not go in. I press with all my might and it wont budge. But again, after about 10 good tries at it goes in and I can then select my gear but still feels very stiff.
After stopping again I didn't shut off the engine and dicked around with the shifter basically figured out that my car is not recognizing Park. On the instrument panel each gear lights up but not P. It gets very stiff when trying to put it in P but it doesn't actually go into P. If I put it in P (or really the further up it will go) and shut off the car, it won't start again. I can start it up in N and only N.
Santa FE SM (2001-06) :: Steering Wheel Vibration In Park Or When In Gear But Idling?
Would bad harmonic dampener cause vibration when in park or when in gear but idling? Highway speeds no vibration..
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: Hold Gear Selector Towards Park To Get Reverse Lights To Come On
I have noticed that I have to hold my gear selector towards park to get the reverse lights to come on. Also some times I have to hold it towards park to get it to start. I changed my tranny in Dec 2009 and occasionally it would do this while starting, just noticed the reverse lights about a week ago. Tried moving the cable where it attaches to the tranny a couple of serrations each direction. No luck. Is there another place I can make an adjustment?
View 14 RepliesFord F-150 (2004-2008) :: Trans Has Delay Engaging When Moving Gear Selector From Park To Either Reverse Or Drive
I have a 2008 F-150. When moving gear selector from park to either reverse or drive, trans has a delay engaging. After engagement, it runs fine, shifts ok, downshifts ok....
View 7 RepliesFord Excursion :: 2001 - Gear Selector Swap
I have a 2001 Ford Excursion with the 5.4 and auto trans. I don't know for sure what specific tranny is in it but I do know what I want to do. I really like the pistol grip style shifters that a 2004 ish F-150 has and I wanted to make that conversion in my Excursion. Is it possible? Are the trannys the same to where I can switch out the gear selectors? And also how would I even do it?
View 7 RepliesFord - Explorer :: 2001 - Gear Indicator Selector Moving Freely Between All The Gears
I have a 2001 Sport Trac. I was hooking up my boat, and went to put it into "R" and heard something that sounded like plastic break. Then, the gear selector seemed to move freely between all the gears. I know it is a pretty vague question, but what part do I ask for to repair it. Or more importantly, HOW do I repair it?
View 1 RepliesSanta FE SM (2001-06) :: Engine Management Light Symbol Illuminated And Severe Lack Of Power
Santa Fe 56 2.2 Diesel ... I am suddenly experiencing the engine management light symbol being illuminated and have severe lack of power I am wondering whether it is Mass air sensor ? blocked fuel filter? or blocked exhaust?
View 9 RepliesFord Super Duty (1999-2016) :: 2001 - Overdrive Switch On Gear Selector Stopped Working
The switch for turning overdrive off that's located on the auto trans shifter stopped working. I've taken off the column cover to see if the wires have been severed from the tilt wheel, but nothing wrong there. I also checked the fuses, and all is well. Is it possible that the switch is bad at the end of the shifter, or somewhere farther down the column?
View 14 RepliesSanta Fe (CM - 2007-12) :: 2011 - Gear Stick Won't Move From Park
I have a Santa Fe Style CRDI Auto from 2011 which is not covered by Warranty and has only done 6000 miles.
The problem is that the Gear Stick Won't Move from the 'Park' position (with the engine on and brake fully pressed down).
There have been issues over the last couple of weeks where it was difficult to move the gear stick at times but it was fine after waiting a few seconds. Now it seems completely stuck.
Touareg :: Selector Is In Park Not Getting Recognized When Engine Turned Off
Since we have had vehicle, it has had fault whereby whenever we turn engine off, the key will not come out of lock and display says "engage Park" even though we already have.... Only solution is to turn ignition back on and then off again, and then key comes out. Dealer has had one go at it, but no success, due to go for another try next week.
View 8 RepliesExplorer :: 2004 Difficult To Shift Transmission Selector Out Of Park
My 2004 Explorer XLT 4.6L V8 AT is very difficult to shift out of park. Sometimes I have to push very hard on the brake in order to get the transmission selector out of park. Other times it is no problem.
View 1 RepliesSanta FE SM (2001-06) :: Won't Go Into Park Or Start
I have been getting a 2006 Santa Fe GLS A/T back on the road for friend who let it sit for almost 2 years because the bumper had gotten knocked off. I charged the battery to get the car to start and it started up OK, but the front brakes were shot completely. I then proceeded to replace the front brake pads and rotors, and when I went to start the car again I noticed something peculiar.
The car wouldn't start, or even attempt to (didn't here it cranking at all). I know the battery is good, and all the other components in the car turn on when I turn the key to A/C setting. I have the shift lever in what would seem to be Park, but the light on the console shows it is Reverse. It shows the car is in reverse when I have it in Park or Reverse, and shows Neutral when I have it in Neutral.
Before I did the brakes (which I don't believe to be related) it was being a bit fussy about switching gears and going into park, but it was definitely working.
Santa FE SM (2001-06) :: High Revs While In Park
05 Santa Fe, 2.7 liter, 71,000 miles
Prior to today it had revved high, up to 3000 RPM, once or twice upon start-up but then settled down once I started driving it with no issues at stop lights.
Today, however, no issues upon start-up but within 1 mile it started acting badly. Pulls strong under load, i.e, accelerating. Once cruising speed is achieved and the right foot is relaxed, it loses power, slows and bucks.
At stop lights revs are down to below 800 while in drive and is slow out of the gate. When put in neutral at stop lights, it revs to 3000 then falls to 2000 then back up to 3000. It does not stall.
Replaced the IAC and it ran fine in park for exactly 2 minutes then began revving again.
Santa FE SM (2001-06) :: 2003 Hyundai Won't Start In Park
Two times in the last month my 2003 Sante Fe would not start - the radio, air conditioning would come on but nothing from the engine - not even a click - no check engine light. Had it towed both times - as soon as it was towed it would start up. It seems to happen in 2 week intervals. Now I realize bc they had it in neutral to get on the truck that is what facilitates it start. It hasn't happened in a week but I know it will again.
View 1 RepliesSanta FE SM (2001-06) :: Idling Very High When Put In Park Or Neutral
My 2001 Hyundai Santa Fe has recently started idling very high when put in park or neutral. While in drive the engine idles above 1K and you need to keep your foot on the brake to keep from moving forward. If you shut down the vehicle while idling high, the car will not start right away. It needs to cool down for 10 -15 minutes before restarting. It will run fine for awhile but will go back to revving up again.
View 7 RepliesSanta FE SM (2001-06) :: High RPMs In Park And When Starting
Earlier this week, noticed that my car was surging on its own; basically, if I came to a stop, I could still feel the engine, like it wanted to just take off. And if I would have taken my foot off the pedal, it would have done just that. Also, I knew the car had gas, but sometimes, when starting the car it would not start at all. I would have to wait about 5 minutes or so and add major gas to it with the pedal and then finally it would engage. And then the last thing was that when I would get to my destination and put it in Park, the RPMs would go up to about 1500 or so, maybe a bit higher and then stay there and go back down to about 1000, without me pressing on the gas pedal at all. So anyway, thought it was the throttle position sensor, so I had my Dad install a new one on the car. It was a pretty easy process and thought that took care of the problem.
The surging part basically stopped, so the new TPS took care of that, but then it still had problems with starting. Took it to a car repair place the next day and they changed out the spark plugs, said that they were causing a misfire in the engine. Also changed ignition wires and a new gasket. So after they were done, drove away and all seemed to be fine, but then went to the dentist and Parked and then the RPMs went up again. Tried to start it immediately afterwards and it wouldn't start again. Tried a few minutes later, added gas with the pedal and it did start. Took it back to the car repair place, they drove it around, inspected everything and everything checked out fine. (Yeah, of course!) Ok, so just thought maybe the repairs were taking a bit to take effect. But later in the day, wouldn't start again.
So next morning, took it to the Hyundai dealer. They looked at everything for about 2 hrs, and said that there was a vacuum hose that was leaking, so they put on a new clamp but everything else checked out okay. Ok, so now it starts fine every time, but today it did that high RPM thing again when I put it into Park. It doesn't do it every time, but the RPM will just go up randomly then go back down and go back to normal. Should I clean the IAC with some type of carb cleaner to get out any carbon deposits? Or could it be a bad MAF sensor? Not sure what the symptoms are of that. Everything else seems to be okay now except for the random high RPMs when in Park and sometimes at startup too.
It's a 2 WD, V6 engine.
Santa FE SM (2001-06) :: Hard To Start - Revving Up To 3 - 4k In Park
1614 - Powertrain Control Module (PCM) harness is open or shorted - Faulty Electronic Throttle System (ETS) unit - Faulty Powertrain Control Module (PCM)
1191 - Electronic Throttle System Limp Home Valve On
Car is a 2004 santafe 3.5l automatic. symptoms are phantom revving up to 3-4k in park without me doing anything, sometimes car is hard to start, idle is very erratic/doesn't want to stay running. other times it starts and drives perfectly. from what i can gather this is some sort of malfunction in the electronic throttle system, and from searching people say "inspect ETS system", but i'm not sure what this involves. i unplugged every sensor i can locate in relation to the throttle system, cleaned them with electronic spray cleaner and put some di-electric grease. reset the ecu through battery disconnect, and problem came right back. local shop pulled the codes and said it'll be about 1200 for a new throttle body, and that the dealer has to reset it say what.
is there anything i can do with this sans bringing it to the dealer? i'm not even sure it would make it that far, driving home from the local shop it was in limp mode and i could only drive about 30 mph, and barely made it up hills. probbaly take me three hours to drive to the nearest dealer lol.
i replaced the accelerator pedal sensor about a year ago, and it also threw a code for throttle position sensor about a year ago also.