Chrysler - Voyager :: 2002 - Screeching Noise - Serpentine Belt?
Jul 21, 2012
I have a 2002 Chrysler Voyager with 135000 miles and in good shape. My mechanic has replaced the serpentine belt 3 times in the last 24 months each time using a different manufacturer. The last time was <6 months ago. The tensioner pulley was replaced 10 months when the screeching noise returned as it has each time the belt is replaced. The other pulleys all seem to work fine. I use a small fingernail sized dab of NAPA's "Sil-Glyde" lubricant on the underside of the belt every 150-200 miles. I will use it more frequently if it has rained recently.
-AC works fine and is not associated with this screeching
-PS pump works fine and shows no leaks. Rack has been replaced. PS fluid system flushed and filled with new fluid.
-Alternator runs fine
View 7 Replies
Advertisement
I have a 2007 ES350. It started making a vibrating noise and sometimes screech coming from the serpentine belt area. It stops when I turn off the A/C and also stops when I accelerate with the A/C on (only does it when idling).
View 3 Replies
2002 Isuzu Axiom screeches when turned on. If AC on, AC works fine but car screeches almost all the time. Can hear me coming a mile away. If AC is off, car stops screeching once running a moment. My mechanic said more torque on serpentine belt when AC on so he changed serpentine belt a few months ago and currently belt appears to be moving fine. He says compressor operates fine. Started about 6 months ago right after new transmission put in at dealership under Isuzu warranty. Mechanic stumped and waiting for something to break.
View 6 Replies
1990 Dodge Caravan ... I replaced belt, idler pulley, tensioner pulley. The serpentine belt comes off when it rains.
View 9 Replies
My wife's town and country had its serpentine belt replaced. Now it won't go past second gear and is running 3.5 rpms at 40 mph. What do I do?
View 3 Replies
2002 Chrysler Voyager, 3.3L V6, 133K miles.
I'm experiencing an intermittent total electrical shutdown. Driving at any speed, electrical system cuts out - lights, radio, gauges, motor - everything shuts down for a period of 3-4 seconds, then power is restored. Transmission that has disengaged during shutdown takes a few more seconds to re-engage. This can happen 15-20 times during a 25 mile trip or not at all. Last evening a 25 mile trip to destination w/ no problems. On the return, 6-7 shutdowns in the first few miles, then nary an issue. This morning, in pulling around a block to unload some cargo, 2 cutouts. I do not have to touch the key for the restart.
I have cleaned battery terminals & connectors w/ baking soda, scrubbed them w/ battery brush, coated w/ DiElectric grease, run an auxiliary ground, had the battery load tested (good for 700 cold cranking amps), and taken to the local mechanic who spent a few hours and 3 cruises w/ an analyzer hooked up. Not to worry, no problems manifest when van was w/ mechanic. BTW, no fault codes thrown, no "Check Engine" light appearing. Ignition switch tested as OK.
View 7 Replies
I have a 2007 pt cruiser, and it's oh I'd say -10 degrees outside. Of course my car will not start. I attempted to recharge the battery and no such luck. It sounds like everything is turning over correctly. It's just as soon as the car starts the engine shakes and makes a loud screeching noise then shuts off. Now I can't tell if it's just too cold and something is frozen or there's something wrong with one of the belts.
View 5 Replies
My daughters 96 cav has a bad squeal coming from serpintine belt. I tried belt dressing and it threw the belt. I didn't notice any cracks/dry rotting on belt. I put the belt back on but it is still squealing.
View 1 Replies
Can a frayed serpentine belt cause a clunking/grinding noise? The clunking grinding noise has been going on for about 2 months and it goes on and off, Last night it started squealing and I checked the drive belt and it is frayed on the outer edge.
I have a 2005 Prius with 86,000 miles. All of these issues started about 2 months ago, the day after an oil change.
View 2 Replies
After finally identifying a bad serpentine belt tensioner for being the the culprit for my engine noises, my mechanic said that the 'thru-bolt' is siezed. Since the replacement job was at my budget limit he said he doesnt want to get into it in fear that he has to brake the bolt and drill it out (requiring 2-3x more labor cost according to him).
If this is the case, and the 'thru-bolt' is seized, is this in any way something I can make a an effort to tackle? I have a jack and jack stands, and plenty of time.
View 3 Replies
A noise has been coming from my Serp belt for awhile. My serpentine belt doesn't have any wear. At least It doesn't look like it. Will this noise go away by replacing it? or is it something else? Is it the tensioner? I've noticed when car warms up the noise goes away. I do not know the last time it was replaced.
Here is a video : [URL] .....
Car - 2001 Jetta TDI with 230k miles.
View 5 Replies
There has been a noise coming from the serpentine belt area for some times now, and I thought when I get to work on the belt I will get it fixed.
Last night, I replaced the alternator with a brand new one from idpart with a clutch pulley (the original pulley was plastic). I also replaced the tensioner and serpentine belt with this kit from ECS: [URL] .....
Everything was put back tight and nicely. Turned on the engine: the noise is still there.
For sure there is one pulley on its way out, but with one?
Video here: [URL] .....
Noticeable @ 0:47
It's a 2.0 AVH Jetta.
View 3 Replies
I have a mk4 gli and I'm having a problem with serpentine belt squealing when I'm at idle and when I turn the ac on. It's isn't all that loud at idle but when I turn on my ac it gets real loud. My ac stopped working a little but after this noise started to happen. Could it be possible that it's the bearing in the compressor that is making it squeal or could it be somthing else?
View 2 Replies
Is it time to replace? There is a noise coming from the belt and when I listen with the hood up my best guess is that it's the tensioner. I'm not sure if it is easy to replace or if that is even the problem. The belt looks fine. It allows me to twist it barely less than halfway so to me it does not seem loose. But in the rain last week got the battery light and lost power steering, power brakes, etc, then it went back to normal and hasn't failed again since. The car has 131,000 miles.
Is there a way to check the tensioner? It's pretty tight in there. Or am I wrong as to what the problem is? The sound is a rubbing/slight clicking sound that is in time with the engine and you can hear it if you listen inside the car when the engine is on. The belt also seems to wander around on the tensioner just a little. One day it was about a mm in too much, a few days later, a few mm out, in relation to the pulley.
View 11 Replies
So, when I was leaving work I started my car up and heard what sounds like a low grinding noise coming from the area where the serpentine belt is. Let the car idle and it remained.
Put the car in gear and drove off and the sound was still there. the sound gets louder as I increase my speed. It went away a couple of times when I was braking, then came back.
I stopped at the gas station and could still hear it. After getting gas, fired the car back up and heard nothing. When I drove off, the sound returned.
I got home and put it in park, leaving the car on, opened the hood and could still hear the noise. Pressed and held the gas a few times and the sound did get louder.
I am pretty sure it is coming from some rotating part, but no clue what part. What this could be?
recap:
-get noise on startup
-while driving noise gets louder
-sometimes it stops when braking
-sound coming from area of serpentine belt
View 7 Replies
I was wondering because serpentine belt is a big thing for 05 corolla since everything runs on it. I also had a 94 camry which had a alternator connected to a belt. and if i wanted to tighten up that belt i would just loosen the alternator and pull it. Is there a way to tighten up serpentine belt in my 05 corolla in the same way?.
View 1 Replies
My tensioner pulley is making noise.I replaced the rear idler pulley (can't get to the front one), but still have the noise. Mention a DIY for replacing the tensioner pulley bearing. A part number for the bearing?
View 2 Replies
I have a '06 sonata 3.3 v6. Let me first describe what was happening to the car before the noise started. When I first started the car and put the ac, the first time turning the steering wheel in either direction the steering wheel would tighten up and the battery indicator light would come on and the fasten seatbelt light would flash even though I had the belt fastened. It would only happen the first time I would make a turn and after that I could turn with no problem. So in recap, it would only happen on the first turn and only when the ac was on. Now when I start the car up there is a noise coming form the pulley/belt area. I wouldn't classify it as a squeaking noise more like a grinding. I've looked at the belt and it seems to be fine. After I start to drive the car the noise goes away. If I start the car again after a drive within about 2 hours the noise doesn't happen when I start it. What this noise could be? and also could the noise and the steering wheel tightening when the ac is on be connected?
View 1 Replies
Actually above + an interesting mystery.. Late last spring I began hearing a noise of constant pitch (sounding like someone sanding wood) when the engine was cold---Louder when it was colder/cooler. As the engine warmed up the noise went away. Throughout the summer,No Noise. n. Late summer broken water pump replaced along with hoses/belts. No noise until, temps in AM in the 40's.
Now that same damn noise is back.Only LOUDER! Same pattern>>as engine warms noise softens and goes away. My ear suggests noise is coming from the tensioner pulley (But, I've been fooled before)As to the question above, Do I tighten the belt on 'This vehicle' using the tensioner pulley or do I have to use the "Pry the Alternator forward" method.? One last thing, while the noise is occurring it does get louder with acceleration but is soon blocked out by normal engine noise.
View 5 Replies
I have a problem with my 1997 aerostar. There is a squeaking noise that gets more significant when I turn. I am pretty sure this is the drive belt as the power steering fluid is fine. Should I attempt to replace the belt tensioner and if so is it just the pulley that needs replacing or the whole tensioner. I am by no means a mechanic but can figure most things out.
View 5 Replies
Serpentine belt on a 2006 Honda Odyssey fraying and then ripping into the timing belt causing that belt to break? I recently had this scenario given to me as the cause of my recently replaced timing belt breaking.
View 11 Replies
