Suzuki - Aerio :: Shoof Noise And Leak On Turning Left, Only When Air Is On
Oct 7, 2013
I do not know much about cars. I tried to consult my owners manual, but no luck. The problem is this. I have a 2004 Suzuki Aerio with about 73,000 miles on it. When I have my blower on (regardless if hot or cold, ambient, defrost, or AC) and I turn left, my car starts making a "shoof" noise kind of like a large stack of paper falling over. Just today I noticed that the floor of my front passenger area was wet and discovered that there is also a leak or leaks coming down from behind my glovebox when I make these left turns. If I don't have the blower on, there is no noise and (presumably) no leak. The contents of my glovebox are completely dry. I am at a loss as to what is causing this.
What this is, whether it is serious, and can I fix this myself or do I have to take it in? And if I have to take it in to get fixed, how should this problem be described in order to get it fixed properly? I had brought it in to a Midas a few weeks ago about the noise (before I discovered the leak and the air-dependence of the problem) and the guys there said that they heard the noise but thought it was just my wheel rubbing against the wheel well when making sharp turns and that it wasn't that big of a problem.
View 4 Replies
Advertisement
The car is a 2004 Suzuki Aerio with 68k miles on it. I've owned the car since 25k miles, and performed all maintenance on time. The car was also maintained well before we owned it (receipts). I've taken it to our garage 5 times now, for the same noise. Here is the timeline of events:
1) Two months ago started making two noises (rattle over bumps and a faint clunk on driver's side when turning). Garage replaced control arm assembly on both sides.
2) Took it back a week later because it was still making clunk (It got worse over this week, and then stayed at this level. I can feel it under the driver's side floor board. Sounds like a clunk/cracking noise) and was making a new rattle. Garage said their air wrench was messing up the first day and a heat shield came loose.
3) Another week later, still making clunk and making yet another weird rattle/grinding noise over bumps. Garage said this time that it's another loose bolt on the control arm assembly. Tightened and double checked everything. They seemed apologetic and embarrassed about the loose bolts.
4) Another two weeks later, still making the clunking noise. I take it back and take our mechanic for a ride. He hears it. I call back later that day and they say they can't find anything wrong with it (checked struts, front suspension, and cv joint). I speak with a different mechanic and he tells me "we don't do any fancy hard turning when we take the cars for test drives. We drive them like most people with old cars drive them." This seems to infer, to me, that it's only making this noise because I drive my car hard. Fyi, I drive reasonably. They say they had my mechanic, the other mechanic, the shop owner (who was on vacation that week), and ANOTHER mechanic from a different garage looking at it, and they can't find what's wrong. Bring it back next week.
5) Yesterday, they say they looked everything over and couldn't find anything wrong. Said they would have to diagnose it by feel. I have to work, but my husband picks it up and says they said it's play in the drive shaft causing this noise, and that they didn't seem worried about it. I only paid for the first visit.
Does this sound reasonable? Should I take it somewhere else for a second opinion? It does it on turns weather I'm on the gas or not. I like this car and I'm hoping to keep it for at least a few more years.
View 10 Replies
Weird problem I've had for some time... The car makes a noise that sounds like a slipping belt and only does so at a speed of 15 mph or more. Its a manual and I know it can't be a belt because I've done a little testing while driving. I'm going down a hill, put it in neutral, turn the engine off completely and coast down the hill and the noise is still there. So nothing in the engine is turning at this point, I'm just rolling. So what is moving at this point that could make such a noise?
It also makes the noise when the engine is running and what's weird is I can almost make it go away (the cycles of the noise become less and less frequent if that makes sense) while in gear if I apply the gas just a touch to a point where I am neither accelerating or decelerating. What this noise might be?
View 14 Replies
i just recently went to a mechanic check out my wife's car cause it was vibrating really bad, and a pulley was making a lot of noise... they told me that the alternator bearings were shot, and i needed 4 motor mounts, long story short i changed the alternator.... it wasn't the problem... had them check it again, they said power steering.... i didn't want to waist a couple hours of work again, i checked it myself like i should have done in the first place... and found out it was the tensioner pulley.... so can i get any pointers on how to change the tensioner pulley, cause i tried and i lacked about 1/4" of space to get the bolt out... do i need to drop the engine or raise it? if so how.. 2005 suzuki aerio 2.3L .....
View 6 Replies
On my xl-7 upon turning left it makes a poppping noise, its real bad at complete stops,its almost like a cv axle noise. Ive taken it to the dealer at least 8 times and they replaced struts , but it still makes this noise.I also called the main Suzuki customer office and complained. They told me its just one of the characteristics of the new Xl7.
View 4 Replies
I'm wondering, is there a way to disconnect AWD and have my GF's 2003 Aerio SX be driven only by RW or FW drive train?
View 1 Replies
Some time late last year a branch or something managed to rip my filter off my cold air intake.. the check engine light came on and I ignored it, simply thinking I had not tightened the gas cap.
So last week, I went to get my 2003 Suzuki Aerio SX, with 160K miles inspected, and they told me it was through a code that the mass air flow sensor was bad.. Later they find out my filter is just missing.. the clamp and a section of the rubber was still on the tip.. but the rest of long gone.
So I have been driving, 4 or 5K miles with no filter. I buy some mass air flow sensor cleaner, spray it and now my car idles at just under 2K RPM but slowly creeps up to around 3K RPM. It drives fine, but when I pop it out of gear or hold the clutch down. it starts to go nuts.
I put a brand new K&N filter on, I didn't add any oil to it as it didn't say it needed any and it wasn't dry, but not soaked either.
Now when I went to remove my Mass Airflow Sensor, I did remove a couple other parts first by mistake. I fiddled with the temperature sensor inside my cold air intake, but I couldn't get it out due to the rubber ring around it holding it in and sealing it. I also removed the Fuel Injection Manifold Pressure Sensor but I am pretty sure I put it back on fine. and I did remove the Throttle Position Sensor.. so maybe thats my issue?
what should I do to troubleshoot it?
I sprayed wd40 on the throttle above the engine, not sure if it was it or not but my engine was idling at a lower 1800 rmp for a while, still high but not as bad, I took it for a ride around the block and when I got back it was at 3K again, it did run at a steady 20 mph in second gear with my foot off the gass completely.
View 13 Replies
We just purchased an Aerio for my teenage son. We all just love the car. It is the base sedan with 5-spd. There is one problem we did not notice on the test drive. It seems that when the front windshield was made, there is a slight "wavy pattern" that you can see. While it does not inhibit your vision, it is a little irritating.
View 30 Replies
I have a 2005 Suzuki Aerio with an automatic transmission. Occasionally, maybe once every month or two, the check engine light will come on while I am driving and the car will immediately stop down-shifting from 3rd gear. The car otherwise seems to run fine but I end up having to manually shift to get to wherever I am going. Then on my next trip, the transmission will shift fine but the check engine light will stay on for an additional trip or two and then go off. What is going on. By the time I get to it the light is off again and the car seems to function fine.
View 4 Replies
I have a 2004 Suzuki Aerio with a 2.3 4 cylinder 5 spd. The problem I'm having is when I accelerate the car pulls to the right hard the steering wheel turns about 5 degrees. When I left off the throttle the steering wheel comes back to center and I hear a pop and feel coming from the passenger front. It also does this while I'm at speed I can hit a bump in the road and get the same problem. I just gave the car an alignment and the issue got worse now my whole car feels like it shifts to the right and left.....
View 3 Replies
I have an '04 Suzuki Aerio, and there is a loud popping or knocking sound coming from the front of the car when I drive it. I don't seem to hear it when the car is inert (i.e. idling or traveling in a straight at a constant speed). I hear it intermittently when I accelerate/decelerate or turn. I hear it in drive and reverse. The strange thing is that it seems to go away completely when it is raining, and then come back when it stops raining and things dry out. It has been happening for a month or two. I think it has been gradually getting a bit louder. What could cause this?
View 6 Replies
I'm Using Maruti Suzuki Swift Dzire. Till last month my car used to unlock doors automatically while taking the key out. Now the problem is :After turning off the ignition & taking the key off Car doors are not unlocking automatically. If doors are unlocked manually from inside by pressing unlock button situated in the car, doors are unlocking. If I unlock the doors manually and open the doors, I'm unable to lock the car with the remote key after closing the doors.
View 3 Replies
I own a 2007 Suzuki Grand Vitara, V6, about 104,000 miles. My mechanic recommended the annual oil change in December 2015. My vehicle started making a loud tapping noise July 2016, so I took it to a mechanic. My mechanic discovered my car had no engine oil and there's no evidence of a leak. I have to replenish the engine oil every three weeks. My mechanic recommends I replace the PVC Valve; I'm unsure if the issue is the PVC Valve or oil compatibility issue. Oh I must also mention (not sure if it's related) when driving or parked and my a/c is running, the a/c intermittently blows out hot air....I can hear the transition like another vent suddenly opens up.
View 19 Replies
There is a slight noise when turning left sometimes, its not to major, but out of curiosity I went to the mechanic and was they told me this needs replacing:
R& R AXLE SHAFT & CV JOINT - $195.00
R&R STABILIZER LINK BUSHING - $59.50
That was the labor, they did not have the part piece prices since they have to order them.
View 2 Replies
I'm getting a weird grinding noise when turning left/right. Doesn't happen with normal turns, just at the sharp extremes. What might cause it?
View 16 Replies
I have a kind of weird noise and feeling when I turn left with my 1999 1.8T Passat. It sounds like "clac clac clac".
It almost only happens when I'm stopped and I'm accelerating to turn left (U-turn or street crossing). I was wondering if it could be the left universal joint? I don't think and am pretty sure it is not the wheel bearings, but tell me if I'm wrong.
View 4 Replies
As the title suggests, I am getting a crunching noise when I turn left on my 2013 Passat SE. It sometimes occurs when turning right also, but doesn't happen as often as turning left. Hard to describe it any other way. What could be causing this noise?
View 9 Replies
Yesterday I replaced what I thought was a bad front passenger wheel bearing, I removed the hub myself and took the hub to a local dealer to press out the old bearing and press in the new one.
Took the part back to the shop, got everything all assembled and took it out for a test drive. Right away I notice I still here the same noise, possibly even worse then before.
It was already late in the day so I decided to clean up and call it a day. During my trip home I notice everytime I turned the wheel to the left I here a horrible grinding noise, I did not have this sound before changing the wheel bearing.
Second guessing my own work, I took the car to the mechanic down the road today, not the same place that pressed the new bearing in. The mechanic inspected my work and couldn't find any problems at all. Even the ball joint I thought I had ruined was fine.
He inspected both from wheels for play, no play in either wheel. He then put the car up on the hoist while I remained in the car turning the wheel and accelerating. We were not able to reproduce the sound with the vehicle on the hoist, even with his stethoscope he could not here any noise coming from bearings on either front wheel. Everything sounds great with the car in the air, it's just when it's on the ground when there are problems.
Rotated all tire just to make sure it wasn't an oddly loud broken tire belt, once again no change.
I did replace the stabilizer link kit as well since the old one broke while during the wheel bearing replacement. Is there anyway I could have done something wrong with the stabilizer link that could cause this noise? I doubt this is the case since the mechanic did have a look at it.
I'm still assuming it's the front passenger wheel bearing, but don't wan't to go replacing parts I don't need. (I put a new fuel pump in my TJ 2 weeks ago only to discover all I really needed to repair was the broken wire going to the pump )
So just to be clear my car only makes this noise when it is on the ground, when the car is in the hoist I can turn the wheel and accelerate without any noise.
View 8 Replies
I have a 2008 Chevy Malibu LTZ and last week I noticed a revving noise like a fan or something whenever I accelerated from a stop and turned left. Continues throughout the turn and stops when going straight. Doesn't happen on a right turn. Also happens on a windy road when turning left more sharply than just a gradual turn.
Also just noticed this in stop and go traffic. When accelerating slightly and letting off there will be a short grinding/clicking noise that lasts 2-3 seconds or sometimes until I hit the accelerator again.
View 3 Replies
2000 3.5L
On a hard left high speed turn, it vibrates under load. Also while under throttle when making a second gear left hand turn.
Noise will come and go when going over dips at high speeds under load. I have already replaced the left Half shaft.
I am a master mechanic and have had success with changing a half shaft on a similar situation. Looking for other possibilities before I throw another half shaft at it.
View 7 Replies
I just rolled 100k in the 337. Time to do some refreshing. 2 noticeable issues (non-motor related anyway )
1 - sometimes when turning hard left to right, or vice versa, I hear and feel a "cluck", almost like the something is shifting.
2 - I've got a creak from the front (and I think maybe the back too) when I get out of the car. Sometimes I hear it when I slowly go over a bump as well.
3- I think my rear shocks are on the way out.
In the last 15k I replaced both the inner and outer tie rods. That's all I've done to the suspension.
View 7 Replies
