2007 Rabbit shakes quite hard when i accelerate mainly on any type of incline and only between 35-60 mph. When i take it to the shop they cant find a problem.
View 3 RepliesMy ford windstar was making a clacking knocking sound when I had to accelerate for an incline. ( I live in the mountains) Last night on my way home from work it was clacking more often. It has also within the last couple weeks randomly acted like it was not going to start almost like it wasn't getting any gas. The not starting is almost an everytime occurrence and today it started clacking any time moving and this evening it started clacking as soon as you start it. [URL]............
View 14 Replies2001 Ford Escape or later and having problems with missing, low power and shaking when going up an incline. I have had problems with my escape for the last two years missing and missing and more missing. Have replaced Coil packs and spark plugs several of them. Well back in June I let the Mechanic have it for almost 3 months. All 6 coil packs were changed, spark plugs included, all vacuum hoses, belts, water pump, front CAT already had new radiator replaced last year. Had two broken wires leading from the PCM to the fuel injectors 1 and 5, he re did the wiring harness there and checked the fuel injectors.
After all done that could be done, I took my car back and it was purring like a kitten, on a flat surface that is............after driving it for several days, headed to another city and had several small inclines to go up, not bad ones, and between 45 and 50 mph, my escape started to shake, miss, and make noise, not a loud noise, but enough to get my attention, and the check engine light started going on and off. Today I took it back to my mechanic, he went on a test drive with me, (me driving) and it duplicated the problem. Went back to his shop, put the code machine on it, and no codes, I asked him if he had serviced my transmission like I asked, and he checked with his other mechanics and they said no, that the transmission fluid seemed okay, figured it didn't need it. Well guess what it did. So if ya'll are till having problems after you have replaced the coil packs, check for electrical issue around fuel injectors, and your front CAT, mine was full of fuel, then make sure you service the transmission, and you'll have the best little ride ever!!!
Since about 5000 km, I have had a knocking metal rattling sound happening when I accelerate up a hill or a slight incline. It has happened a few times on flat road as well just more prevalent on the uphill battles. Now I assumed it was jus something loose that was rattling since I installed a cold air intake and had installed hid lights(I thought the ballast was banging on something). I tried and tried to find the rattle but I had no success. I read up on here about other people suffering the same problem and that running higher octane gas would solve it well I tried 89 and it was still there just not as much and I recently started using 91 and its gone haven't heard it at all.
View 132 Replies2014 GT ... I'm hearing some type of noise whenever I reach an incline, accelerate or turn the car occasionally. To get a mental picture, I would imagine it sounding like a loose screw rolling to and fro inside the rear drivers side door or backseat. I've looked inside the car and don't see anything.
View 10 RepliesWhen parking on a severe incline, it's hard to put the car into reverse and there's a clank from underneath. It's not a smooth transition. Is this normal?
View 11 RepliesJust bought a 2015 golf TSI 4-door. First time VW buyer so Im not sure if these are normal or I should bring the car in to get checked.... At a dead stop when I accelerate the car seems to shake a little (until 2nd gear kicks in) then it stops shaking, Also, When Im in traffic and I go from dead stop to accelerate to slow down again, it feels like it is down shifting very hard.
View 6 RepliesI have a 2.0. Custom gt28 turbo project. Been up and running for awhile now. Took it on a 4 hr trip home and drove it back.
All of a sudden after the holidays it started to overheat and I had no heat. It will not overheat when idling. I replaced the thermostat recently. Lower hose gets warm when it opens. I replaced the green top sensor. I have done a wire tuck etc and I am running a closed coolant system. I believe I have gotten the air out of the system.
It will idle all day at 190. But as soon as I drive and accelerate hard or go over 50 mph it overheats and will not cool off unless I pull over and turn the car off. It will steam as if it's losing coolant somewhere but I think it's at the cap (too much pressure?).
I am thinking water pump but I am not sure. I got the car with 124k miles I'm at 127000. I was told timing was done at 90 could the pump be failing already? Also when it overheats I get a cel for misfire is that normal?
My 03 Tacoma TRD is showing her years! The truck has about 215k and has some serious vibrations and noises going on. First off I have a constant shaking type of vibration between 25 and 35 mph, but it is also present in the higher speeds of 55 and above but sometimes it gets drowned out. I work at a ski resort so when Im coming down the mtn using 3rd gear or so to slow down I feel the vibration is the most apparent then. So far I have had 2 shops look at my driveshaft and both concluded there is nothing wrong with the u joints. I had a CV shaft installed because one of the boots was torn so I went ahead and had that replaced.
What the vibration is.....2nd is more of a intervalled whooomping sound almost like a bullfrog-like interval. As I increase speed the intervals get faster but it is a drawn out whooomp whooomp not a fast sound. It actually rattles the change in my ash tray to the bpms of the sound. Also I have a metallic clunking sound happening when I put the truck in gear (manual) or start and stop at slow speeds without using the clutch. I was driving around a parking deck the other day in first gear and it would make the sound whenever i hit the gas AND when I let off the gas. ONE MORE THING, whenever I am starting off under load in any gear, the truck jerks.....it hesitates and lurches but only at low rpms and again in any gear.
So after owning my R for just over a week I've noticed that when I accelerate hard or let off the throttle the shifter seems to move quite a bit. Is this normal with the stock mounts or is it something I should have looked at? I know the stock mounts are rubber to aid in isolating the vibration of the engine but it seems like the shifter moves a little more than I would expect.
View 1 RepliesEvery time i make a turn or accelerate decently hard, i hear a pop, which generally sounds like a tree branch snapping...this isn't a quiet noise either, also i can feel it in the steering wheel sometimes as well.
View 12 RepliesMy Jetta wagon with 131K on it has a ping when I accelerate hard. I know it's not bad gas, but probably a carbon buildup. I've done a few seafoams that had some effect, but not much. I'm gonna do the water spray/steam next. Which components are prone to carbon buildup in these gassers that would cause ping?
View 4 RepliesSo I have just over 14k on my 2015....... I love the truck but have had a few small issues. I had a water leak coming in from the roof that would leak through the grab handle. Nothing major dealer replaced one clearance light seal and they said the windshield needs to be re sealed.
Then I had a god awful irritating squeak in the dash..... It only does it late In the day when it's been hot. The dealer said it was a loose air bag. I have had the truck back a week and it's doing it again.
Those are little issues that will get resolved...... I hate having problems with a brand new vehicle but I understand it happens and that's what warranty is for.
I also reported a bad shake to the dealer...... The truck will shake very violently and have a very loud "diesel" sound. It's very specific at when it occurs. It has only done 4 times in the past 6 weeks including today. The odd thing is the 4 times it has done it has been the same time of day in the exact same spot on the exact same road!!!!
Basically I leave my office sit in some traffic and by the time I get to the parkway it has been35 minutes or so. Only happens in 6th at 60 which is roughly 1,400rpm a slight load due to a small incline and it shakes real bad! The typical "diesel" sound you get when under a load is very pronounced almost to a knock. It will continue to do this as you slowly increase throttle until it down shifts and then goes away. I also caught it doing it and I manually shifted to 5th and it went away.
Because of the rpm at which it happens with slight load only doing it in 6th I lean to a Trans issue and more so a converter problem. It feels like converter shutter. I just don't understand the engine sound.
I gave very descriptive info to the dealer..... Several techs drove it and could not duplicate. I just picked the truck back up last Thursday and the dash squeak is back and the shake happened yesterday and again today. So I am a bit irritated to say the least.
I really hate the fact that I know there is a problem but I also understand if a tech can't duplicate it he can't diagnose it. However today I did get a video of it with my phone so they will know I'm not making this crap up!
I bought a used 2010 GTI with 37k on it. I am loving the ride, more than I even anticipated. It has the DSG, and I enjoy the multitude of ways I can choose to drive this vehicle.
I do have one issue of concern that I would like some feed back on. Occasionally, when driving hard, the car makes a horrible shudder and doesn't accelerate. It's almost as if the vehicle misses a shift and is governing itself quickly and harshly. I haven't had enough concentration to check RPM's when it does it.
It feels horrible, scares me and makes me wonder what I'm doing, what I need to get checked, or if this is something others have experienced.
Pic for good measure.
New wheels installed! They look great, but I have some shaking when I accelerate from 60 to say 90 mph! The hub centric rings are in place! Also before I installed the new wheels I hit a big pot hole and a had some low to medium howling noise coming from the front end! The hollowing is still present with the new wheels but I also have the shaking now!
View 5 RepliesMy 20th Gti is shaking. So when I accelerate to about 80mph and then let off the gas it the front end will start shaking and once I tap on the gas a little it will stop. Why is it doing this and what is it that has gone bad?
View 16 RepliesMy 2009 Camry's gas pedal is really loose for some reason. I can feel the gas pedal shaking as I try to accelerate really fast sometimes. In addition, my engine is louder than most of other Camries out there. I heard that adjusting the throttle cable should work. However, I can seem to find the cables.
View 2 Replies2000 Nissan Pathfinder, 150k miles, automaticWhen I accelerate between 2nd and 3rd (from what it feels) the whole car shakes. No matter what speed I'm already at.I recently had both CV axles replaced. Transmission fluid doesn't have any flaky stuff or anything, it's pink though. The check engine light is always on, but it starts to blink when it starts to shake between 2-3 gear.
It's been doing this for about two weeks, nothing has changed, average 15 miles a day. No weird smells from the engine, leaking radiator fluid super slowly (was told to just keep filling it)To start the car I have to press the gas slightly.That's everything I know is wrong with it. I just want the shaking to stop. Does it sound like I need new transmission fluid or something?
I have a Chrysler 300m 2004, 3.5. I have done a replacement of the timing belt at 100 000 mark with a chrysler dealer.
It has been misfiring for a while since. I brought it to a dealer who told me that the camshaft crankshaft and oxygen sensors need to be changed. So I did. (camshaft and crankshaft were changed with the dealer. Oxygen sensor was changed with independent with generic not factory sensor because the dealer did not have it.)
It did not solve the problem. Now the car is shaking and sometimes cannot accelerate. I even change spark plugs and battery. I brought it to an independent, the mechanic told me that there is 3.8 degrees difference between cam and crankshaft sensors. They are out of sync and suggest that I should bring back to the dealer who replaced the timing belt.
When I brought the car to the dealer, they told me that chrysler 300m 2004 tolerates up to 12 degrees difference so the cam and crankshaft are not out of sync. Nothing to do with the timing belt that they installed. I called the independent mechanic but he told me that in general it's 1 to 1.6 degree.
In my 4 runner when I slowly accelerate between 30 and 40 mph just as I can hear the car about to shift gear the car begins to shake when I than accelerate the shaking stops. Brought it to a shop and they changed a spark plug and coil they say was mis firing, but I pick the car up and the problem is still there. Their diagnostic shows no problems, yet the shaking is still there when slowly accelerating between 30-40, no check engine light has ever come on. While it shakes if I shift the car from D to 4 the shaking stops, and if I speed hard through 30- 40 it doesn't shake, just when I slowly accelerate.
View 5 RepliesI have a 2003 Mercury Sable with 139,000 miles on it. A few weeks ago I had been driving on a long trip and stopped for gas. As I was exiting the gas station and went to accelerate as I pulled out, I felt a shaking and the car went out of gear. The car will start now, but pushing on the gas does absolutely nothing whether the car is in drive or reverse. I'm trying to decide to have it fixed or to sell it at this point. Is this a transmission problem, as I suspect?
View 16 Replies