Passat (B5) :: 2001 - Random Idle Stutter After Engine Warmed Up
Feb 9, 2008
Our 2001 Passat wagon 4cyl turbo automatic has a random idle stutter. When sitting at a stop light the RPM's quickly drop and then regain idle. It happens at random times and only when idling after the engine has warmed up. It doesn't seem to matter if its in drive or park. What sensor could be failing or a possible cause? Over the past year the problem has increased from almost never to a few times at every stop light. My OBDII reader shows no codes. Car has 105K miles and I cleaned the throttle body.
View 2 Replies
Advertisement
What is this noise? Video included... [URL]... This noise comes up after the engine gets warmed up and only when the car is decelerating or idle. That is, as soon as I take my foot of the gas pedal the car starts making this noise and it is very loud. No error codes.
View 3 Replies
I'm having continued issues with my mom's POS 2005 Hyundai Accent. It usually runs great cold, but once it's warmed up, it will stall out while driving. This almost always happens when accelerating from a stop. After it stalls, you have to let it set for 30 seconds to a minutes before it will start again. It will also sometimes idle roughly.
I've changed out the TPS and the MAP sensor, the battery, the CPS, the fuel pump, and the spark plugs. I did find that the radiator bypass hose was leaking on to the wiring for the O2 sensor. I fixed that, and the wires appear to be fine. I've sprayed throttle cleaner around the intake and can't find a leak. I scanned the ODB codes and I'm getting a Random misfire, misfire on cylinders 1, 2, 3, and 4, the Throttle Position Sensor and the MAP sensor, both of which have been replaced.
Tonight during my troubleshooting I was trying the wiggle test on the various connectors and got zapped when I was wiggling the coil pack connectors. Is that normal? I'm starting to suspect a wiring or electrical issue, but I'm not sure how to troubleshoot that.
View 28 Replies
I bought the car 3 years ago 2003 2.4L Hyundai Santa fe , I have driven it around 200 miles ( to and from shops ), I am having an issue now where once the car is warmed up ( post 15 mins ) It will idle really low * almost stalling * and oil pressure light will flicker, If I hold the brake and get it to almost 800 - 1k RPM it goes off and driving is not an issue *no knock*. I just got it driving for the 1st time in the past year, and drove it for about 45 mins in stop an go traffic, Temp light was all the way to cold, once stopped in stop and go traffic it would go up half way, as soon as I could get above 50mph it would slowly work itself all the way to the bottom?
More Information
2003 2.4L Hyundai Santa fe
I should really count my losses and move on but I cant.
Bought the car with 89K on it I now have 90K
New Battery
New Radiator
New Motor mounts 3
New Trans mount 1
New Hoses
Oil Change ( 40 miles ago )
Trans Oil Change ( 40 miles ago )
Power Steering Fluid change ( 40 miles ago )
2nd cat delete ( didn't want to waste any more money )
After Market 1st Cat
View 2 Replies
My 2003 f150 5.4l has developed a slight stutter when I turn from a stop or go from reverse to drive or vise versa. I had thought it was the IAC so I replaced it but the issue is still there. There are no engine codes and it does not miss fire at idle or while driving. The problem appears to be happening only when the a/c is on. Could the belt be the cause?
View 4 Replies
2001 V6 Passat with 125k miles throwing a P0430 code.
Having trouble on cold starts, takes about 10 minutes to finally get it to turn over. When it does the idle is extremely rough. For the first 1/4 mile the car bucks, stutters, and misfires. After that it runs fine and starts fine when already warm. I am noticing slightly decreased gas mileage but nothing major.
Valve cover gaskets were replaced 2 months ago, but were leaking oil for at least a year before I could afford to have them replaced. I am still noticing some oil leakage, however not as much as before. I have had both O2 sensors replaced twice in the past 5 years. Timing belt was replaced at 98k. What might be causing the starting issues?
View 1 Replies
I have a 2001 1.8t tip wagon(75k) that that is starting to worry me. It makes a tapping sound (coming from back of valve cover) AFTER it is warmed up at idle. When the RPMs go over 1,000, the sound goes away. Is this the cam chain adjuster or tensioner??? Also, when the engine first starts up it makes a similar noise , only louder, for the first couple of seconds.
View 5 Replies
After its 2.3 liter engine is warmed up, our '87 Ranger has intermittent problems of idle dropping to nearly dying altogether and then overcompensating to recover. Normally, after throttling up to 1500rpm or so, it will idle steady for 15 or 20 seconds then start the process again.
After normal tuneup part replacements (i.e. plugs, wires, cap, rotor and fuel filters=there are 2), I spent over $100 on replacing O2, throttle position and EGR sensors but symptoms still occur. Was advised to consider replacing the Mass Air Flow sensor but that part doesn't exist for the '87 model. Was told the equivalent part is "Idle Air Control Valve" at approximately $80.
View 14 Replies
I have a 1999 Dodge Ram 1500, 5.9L. My problem is it will not idle until the engine is fully warmed up. When I first start it, I need to keep my foot on the gas, if I let it go it dies.
View 1 Replies
My '01 F-150 2WD, XLT has a foghorn sound coming from the left front side at idle after the 4.6L is warmed up. It goes away with an increase in engine RPM and is unnoticeable at hwy speeds. I have no codes (I have checked w/ my code reader). The service desk guy at the stealer said it is my abs pump going bad (I figured it was a pump of some sort, my 55 packard PS makes the same noise when almost empty-the system leaks). It also appears this is a stealer only part, and going to cost 6 or 7 benjamins to buy and probably another 5 benjamins too fix.
View 4 Replies
1999 Passat 2.8L. New coil pack assembly, wires, plugs, valve cover gasket(oil in plug holes). Misfire at idle and low rpm. Driving at higher rpm's misfire seems to go away. Codes are random misfire and cyl 1 misfire. Need to know if I would get an injector code if a fault or If that motor has problem with faulty cams or springs or any other common problems. I am going to do a compression check this weekend I'll update that info.....
View 9 Replies
I have a 2004 gls 1.8t Jetta. It has a straight piped turbo back exhaust, and a stage 2 tune. I recently had a problem with my car starting to rough idle when the engine gets to proper temp. The car starts to idle roughly, and when driving the car will bog down, if I keep my foot on the gas, the car acts like it is coasting and the rpms fall, but at some point the car will shoot off like i floored it. At lower rpms in the 1st and second gear, the car will randomly and periodically start bucking, with the same symptoms. I already replaced my coil packs and spark plugs with a kit off ecs, and when i went to change the spark plugs i had oil on the spark plugs and oil leaking from a bad valve cover gasket, so that was replaced as well. I replaced the fuel filter already.
The MAF sensor was just cleaned and didn't look too dirty. When I unplug the MAF it still idles rough. The fuel pump relay can be heard working properly when the door opens. Another problem that sometimes occurs on cold start is if I don't wait long enough for the pump to activate or sometime right after it starts, the car will start partly then stall out. When driving and the car is bucking the exhaust gives rich fuel smell. Also when 2 stepping in the car (which I don't do very often), the CEL starts to blink and the car misfires and drives rough. I figure since I don't have many parts on it yet I probably shouldn't do it anyway so I don't blow up the engine.
View 3 Replies
I have a 1993 Geo Prizm (Toyota Corolla) that idles roughly and lopes only when the engine is fully warmed up to operating temp. I changed the plugs, and wires are only 1 year old and seem to be in good shape. I suspected a vacuum leak, but have not been able to find one.
View 4 Replies
So I took a trip from Dallas to Florida, and on the way back my check engine light came on. The car shakes at idle, almost like it wants to take off. I drove it back to Dallas like that since the car runs normal on the high way. I got it scanned at autozone and the code said it had multiple random misfires. I'll be taking to the dealer in the morning, but what it could be? The car jumped over 50K during the trip hopefully the dealer will be nice and cover it.
View 4 Replies
Ok. Im going to keep this as short as possible. I bought my 05 passat 1.8t AWM TIP used in 09 with 44k
At around 90k I started getting a Random misfire only at idle. And it would be a different cylinder, not always the same would come back after clearing. The RPMs would be very low like around 840. And i think it should be around 920-960. That seems to be one of the main issues. Everything on the car is stock.
So basically, If my CEL starts flashing, and I clear it, I could drive a million miles with no misfires, but as soon as it starts to idle they come back ( I do have vag-com) and know how to use it for basic functions.
This is what has been done:
July 2011:
Engine rebuild (bad piston rings due to clogged cat converter)
Timing belt Kit (Timing was off 5 degrees!!!)
brand new turbo KO3, and Oil feed line
DV
N75 valve
Fuel Pump
Fuel Filter
Fuel Pressure regulator
MAF sensor
ECU swapped out (old ECU would not go through all steps for Throttle body alignment)
So, after all this and 3 weeks later, I get the car back and it ran great the whole way home. Put it in park waited 5 seconds, and the random misfires came back. So it went back to the shop the next day.
September 2011
These things were done:
Crank Position sensor
Cam position sensor
Compression test ( to make sure he didn't make a mistake while rebuilding motor) Results were Perfect
Leakdown test
Map sensor
Another MAF
2 O2 sensors
Upgraded DV
Fuel injectors
Removed engine wiring harness and OHMed every single wire. Nothing wrong
OEM Coilpacks
3 sets of copper plugs
Throttle body was swapped with 2 others from known working cars.
Trans pan replaced fluid flushed and new trans filter
I have heard this is a fairly common thing on the B5.5 models...
View 5 Replies
OK--2001.5 1.8t Tip, 85k, nothing but Mobil1 since day one religiously. At around 81k miles the t/belt tensioner seized & let the belt jump and bend a few valves. Had VW do the repair under the p.t. warranty. Engine now runs very well again except there is a knock noise that sounds an awful lot like a crank or rod bearing. The noise is worse with the engine fully warmed up and in drive or reverse. Took it back to VW, they said it's a bearing in the a/c compressor. Sounded like B.S. to me, since the noise is no different with or without the a/c on. I picked up the car & removed the a/c belt at home & found the noise was exactly the same. I've about had it with VW on this issue. Been back 3 times with the noise complaint, & the noise is getting worse!!
View 1 Replies
I had the transmission filter and fluid changed at the local VW dealership had some issues with that but they straightened that out and its been fine for a while well then about 2 or 3 weeks ago i was trying to mess with an audi and hit the gas (has the 6 speed auto tranny) and the car kinda stuttered and the check engine light flashed probably 4 or 5 times then went off, it did that a few times after that then my wife was driving it and it did that stutter again and the light stayed on, the code said misfire on cylinder 2..
So I replaced the plugs today and it did fine at first but when i got to about 55-60 and went to speed up and it started to miss pretty bad then steadied out and sped up. no check engine light or anything but it was missing.
View 1 Replies
2004 Passat 1.8t 4motion ... I am getting random misfire at idle like one hard knock then every thing is ok. I also have no MIL light or retrievable codes. I checked for vacuum leaks don't see any. Change out some old vacuum check valves. Replaced oil breather hose had crack. I Changed timing sensor, timing belt and fuel filter fuel pump died changed out. The old fuel filter had something rattling around in it is that normal? Also when I get gas no matter where, 91 octane only the car idle stumbles about 5 minutes after fill up then smooths out after a mile or so. EVAP purge valve clicks some times? Haven't check EVAP canister for saturation. Fuel regulator? I haven't checked fuel pressure. Car was not starting after sitting for week end hard start took 3 to 4 tries then starts up ok for some reason that is not happening now?
View 6 Replies
The 2001 Passat 1.8lT has an engine warning light on and feels like it is running on less than all four cylinders.( very rough idle) This is the first time we have seen this particular warning light and the manual suggests that it has a problem with the catalytic convertor.( 170K miles on the car) The car had no symptoms until the light came on today and the car was serviced last week. ( oil change and new tires) It seems that every time I take the car in for service something goes haywire shortly afterward.
View 6 Replies
Passat B6, 2009 TDI CR, 140 bhp, DSG.
Having an issue that's bugging me. all cold starts are fine. However, if I drive a short distance then try to restart the engine cranks, sounds like it catches but stalls.
It takes 2-4 retries to get it going, i'm not releasing the key too early as this happens even when I hold the key in.
I've not been able to get a VAG-COM on it yet but would like to know whether this is likely to be something simple or, if it's time to sell the car?
View 2 Replies
We have a 1999 4Runner with the V6 engine, auto tranny, and 230k miles. For going on a year now the engine will occasionally stall when at idle…usually happening at stop lights. The engine starts right back up. This may occur once every other month or once a week for several weeks. Stalling has occurred with warm engine and cold engine, during raining/damp period and when dry. Never has the check engine light come on or has it generated fault codes. Dealer can’t find anything wrong. We’ve replaced Air Idle Control Sensor (OEM), Throttle Position Sensor, Mass Airflow Sensor, and cleaned the throttle body. Plug wires and timing belt were replaced a couple of years ago. Other than this one issue it runs great. What to try next.
View 4 Replies
